Search
1252 articles for “composition”
-
Fabrication of Polydimethylsiloxane Composites with Nickel Nanoparticles: Unification and Current–Voltage Relationship
Abstract: Polydimethylsiloxane (PDMS)–nickel nanoparticle (NiNPs) nanocomposite films were fabricated and systematically investigated to understand their electrical transport behavior through current–voltage (I–V) characterization. Nanocomposite films with varying Ni nanoparticle filler concentrations (14.88 wt%, 15.77 wt%, and 16.65 wt%) were prepared using a solution-mixing and spin-coating technique, followed by controlled thermal curing. The electrical properties of both pristine PDMS and PDMS– NiNPs nanocomposites were examined over a wide voltage range (up to 800 …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 22–29 Read article
-
Fabrication and Comparative Study of Synthetic and Eggshell Waste Derived Hydroxyapatite-Based Composites for Biomedical Applications
Abstract: Hydroxyapatite is widely used as a bioceramic material in orthopedic and dental field because of its exceptional biocompatibility and bioactivity. Hydroxyapatite (HAp) doped with several mineral ions has been frequently reported to further enhance its bioactive nature. Several studies indicate that biological waste materials can serve as calcium sources for hydroxyapatite synthesis, with eggshells being one such promising source. In the present work, two types of hydroxyapatite were synthesized: pure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 33–46 Read article
-
Advancements In Energy Storage Materials Are Overcoming Challenges and Shaping Future Innovations
Abstract: The pursuit of efficient energy storage technologies is critical for advancing renewable energy systems and improving the performance of electric vehicles. This review emphasizes the synergistic contributions of polymers and composite materials in phase change materials (PCMs), zinc-based batteries (ZnBs), lithium-ion batteries (LIBs), and graphene-based systems. PCMs, particularly polymer-encapsulated and polymer-stabilized composites, demonstrate a remarkable ability to store and release thermal energy, enabling improved thermal management and operational stability. In …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 704–723 Read article
-
Design and Development of Lightweight Polymer Composite Manifold Using CF-ABS and GFRP for Aerodynamic Energy Recovery in Electric Vehicles
Abstract: Electric vehicles provide a number of advantages over conventional fuel vehicles due to their low to no emissions. High energy efficiency improves the driving performance of Electric vehicles. However, they have to face certain challenges such as the high purchase cost of batteries and lack of battery charging facilities. The major drawback of an Electric vehicle is to store sufficient energy to run the vehicle for a long time. This …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Polymer Nanocomposites: Cutting-Edge Material for The Aviation Sector
Abstract: Due to current market demands and a need to produce structural materials for use in both military and civilian aircraft more efficiently, the aerospace industry is always pushing for higher productivity. The design and manufacturing of aeronautical components in the present and the future are heavily reliant on materials of the polymer composite class. The building of many airplane components uses polymer composites, which are generally helpful. Based on their …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 227–234 Read article
-
Bio-Inspired FGPCs for Biomedical and Structural Applications
Abstract: Bio-inspired functionally graded polymer composites (FGPCs) represent a new class of smart materials that use gradient material distributions to enhance mechanical and biological properties, mimicking natural systems like bones, shells, and plant stems. FGPCs exhibit smooth gradient distributions across interfaces, which improves biocompatibility and reduces the risk of failure under complex loading and environmental conditions. In this study, bio-inspired FGPCs were designed, fabricated, and validated using a combined experimental and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 456–481 Read article
-
Chitosan polymer and composites Hydrogels: An Emerging Approach for Microplastic Elimination from Water
Abstract: Hydrogel is a polymer network which can retain huge volumes of water but still retains its shape because of its special chemical formula. Recently, hydrogels have become an object of great interest for environmental remediation due to the possibility of controlling their physicochemical properties in the case of removal of microplastics. The current work reviews and analyzes the efficiency of application of conventional coagulation systems based on chitosan and new …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Properties of Concrete with Incorporation of Hybrid Fibers and M-Sand-A Review
Abstract: The construction sector is experiencing rapid growth, resulting in an increasing demand for building materials. Concrete, being the building material that sees the most widespread usage, Concrete, as the most extensively used building material, plays an important part in future breakthroughs and advancements However; to make progress we must also address the problems of global warming and pollution. The construction sector is widely considered to be one of the biggest …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 33–39 Read article
-
Modified Oil Bitumen with Polymer Waste for Oil Pipeline Application from Bitu
Abstract: Protection of oil refining, oil production and gas pipeline equipment from corrosion is the most important problem today. Currently, anticorrosive materials are mainly used, resistant polymer compositions, epoxy resin, bitumen and other materials for coating metal parts of these equipment. But these anticorrosive materials do not always provide metals from corrosion at the metal-antioxidant boundary and do not provide high strength of the protective layer, so these anticorrosive materials do …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 101–109 Read article
-
Comparative Analysis of Tensile Properties of Virgin and Rice Husk-Reinforced PLA and ABS Filaments
Abstract: This study focuses on evaluating the tensile behavior of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments reinforced with rice husk ash (RHA) particles, in comparison with their respective virgin counterparts. The incorporation of RHA, an abundant agricultural waste by-product, was considered with the objective of developing eco-friendly composites suitable for additive manufacturing applications. Tensile testing was carried out to assess the influence of the reinforcement on the mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 224–229 Read article
-
A High-Efficiency Fuzzy-Logic-Controlled Wireless Charger Enabling the Safe Integration of Electronics in Carbon Fiber Reinforced Polymer E-Bikes
Abstract: The integration of advanced electronics into structures made from carbon fiber reinforced polymers (CFRP) presents significant challenges, including thermal management constraints, electromagnetic interference (EMI), and the imperative for lightweight components. This study addresses these challenges by designing and validating a fuzzy logic-based wireless charging system specifically engineered for lightweight E-Bikes employing CFRP frames. The system mitigates thermal risks associated with the low thermal conductivity of polymer composites by implementing a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1159–1172 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Effect of WEDM Machining Parameter on the MMC: A Review
Abstract: Recent area of manufacturing is highly focus on good accuracy and a complex shapes are mechanized by the advanced machining operation. The wire electrical discharge machining (WEDM) have the ability to produce the complex shapes with having high accuracy. The WEDM is non-contact type machining operation and is used for metal materials as well as Metal Matrix Composites (MMCs), ceramics composites those have many application in vast areas such as …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 1–7 Read article
-
Opportunities and Challenges in the Operations Management for Industry 4.0
Abstract: This study investigates the opportunities and challenges in the operations of composite manufacturing industry for the adoption of Industry 4.0. As known from the literature that industry-4.0 is referred as the fourth industrial revolution which majorly focuses on cyber-physical systems. It is suggested that the instantaneous integration of digital and physical systems, in conjunction with new transformative technologies that facilitate work, will revolutionise the ways of work and, as a …
Published in International Journal of Advanced Robotics and Automation Technology · Vol. 3, Issue 1, 2025 · pp. 7–17 Read article
-
Bio-inspired Thermo-responsive and Self-Healing Polymer–PCM Hybrids for Next-Generation Smart Textile Applications
Abstract: The integration of phase change materials (PCMs) into flexible polymers represents a promising strategy for developing smart textiles with advanced thermal regulation and mechanical adaptability. However, the challenges of PCM leakage, poor mechanical strength, and durability under cyclic stress have limited their practical applications. In this study, we present a novel self-healing and elastic composite based on thermoplastic polyurethane (TPU) incorporating 30 wt% microencapsulated PCM (mPCM) and dynamic disulfide bonds …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 228–238 Read article
-
Influence of the Modification of Resol Phenolics on the Properties of Glass and Cotton Fiber Laminates
Abstract: Fiber reinforced polymer (FRP) composite based on resol phenolics awaits special attention due to excellent inherent properties of the resol phenolics. In this study, modified resol phenolics by unsaturated polyester (UP) and epoxidised novolacs of simple phenol, o-cresol and p-cresol were used to fabricate glass and cotton FRPs. An overall enhancement of 25% in tensile strength and 40% in impact strength is achieved upon modification for both the modified laminates. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 239–255 Read article
-
Isolation and Characterization of Glucuronide Compound from Luffa Tuberosa (Roxb.) for Potential Applications in Polymer Chemistry
Abstract: This study explores the isolation process of glucuronide compounds from Luffa tuberosa (Roxb.) using an efficient and cost-effective method. The extracted compound, Gypsogenin-3β-O-β-D-Methyl glucuronide, is characterized using spectroscopic techniques such as IR, NMR, and Mass Spectrometry. The polymeric nature of glucuronide-based compounds and their potential applications in polymer and composite materials are discussed. The findings highlight the suitability of glucuronide derivatives in biomedical, pharmaceutical, and polymeric drug delivery systems. Additionally, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 566–572 Read article
-
Multi-Objective Optimization of Carbon-Glass Fiber Polymer Drilling Process Based on Fuzzy Grey Entropy Weighing Method
Abstract: In recent years, the machining characteristics of hybrid fiber polymer composites have garnered significant research attention due to their growing industrial applications. This study specifically focuses on the drilling of hybrid carbon-glass fiber reinforced (CGFR) epoxy composites, fabricated using the hand layup technique. The key machining characteristics evaluated in this drilling process include surface roughness and circularity error. The influence of critical drilling process parameters, such as spindle speed, drill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 100–112 Read article
-
Wear Behavior and Mechanical Characterization of Pure Aluminum Reinforced with RHA by Using Powder Metallurgy Method
Abstract: In recent years, composites made from aluminum and its alloys have gained significant attention due to their optimal blend of low weight, high strength, impressive toughness, enhanced thermal stability, straightforward casting processes, superior corrosion resistance, and availability compared to unreinforced aluminum and its alloys. These aluminum-based composites are widely utilized in producing components for industries such as automotive, aerospace, marine, and nuclear. Rice husk ash (RHA) is a fine, powdery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 495–502 Read article