Search
862 articles for “Container”
-
Analysis of Bioethanol Production from Agricultural Waste using Simultaneous Saccharification
Abstract: This research was carried out to investigate the possibility of producing a bioethanol using an agricultural waste with the adoption of simultaneous saccharification method. The results collected during the investigation shows that the effect of different varied parameters on the yield of bioethanol from potato peels and other different characterization carried out on the produced bioethanol shows possibility in the reliability of the production process where A(B), A(0.5) and A(2) …
Published in Journal of Petroleum Engineering & Technology · Vol. 12, Issue 1, 2022 · pp. 9–15 Read article
-
Petroleum sludge treatment and oil recovery: Review paper
Abstract: Oily sludge is a type of semi solid hydrocarbon waste material that produced by the petroleum industry. It is generally mixture of water, crude oil, and sludge that is solid matter. As it contains large amounts of various types of hydrocarbon like paraffinic hydrocarbon, saturated and unsaturated hydrocarbon, cycloalkanes, aromatic compound , poly aromatic hydrocarbon, benzene series, polycyclic aromatic hydrocarbons, some metals, sulphur, nitrogen and other toxic and harmful substances, …
Published in Journal of Petroleum Engineering & Technology · Vol. 12, Issue 1, 2022 · pp. 24–33 Read article
-
Potential of the Biokinetic Integrity of Chromolaena Odorata leaf as Bio-stimulant for Petroleum Hydrocarbon Remediation in Soil
Abstract: The biokenitic parameters of each TPH degradation in the various reactors set-up was determined in terms specific rate of TPH degradation, maximum specific rate of TPH degradation and the equilibrium or dissociation constants as well as the rate of TPH degradation (-kd) or the decay rate of TPH. The value of -kd is within the range of -0.0551 to -0.0151 for room dried and -0.0447 to 0.0118 for sundried whereas …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 47–75 Read article
-
Infinite Possibilities Unlocking the Future and Scope of Startup Communities
Abstract: The country is an international leader in development. India is implementing a significant change into measures that support new businesses with an atmosphere that encourages business in the current generation.A newly formed company is a fledgling business founded by a few businessmen to produce distinctive unique one-of-a-kind items or offerings. It seeks to promote originality and hasten the development of innovations."A upstart is an inadequate, fast-growing, adaptable, and vulnerable commercial …
Published in Journal of Production Research & Management · Vol. 13, Issue 1, 2023 · pp. 1–5 Read article
-
Customer Perception on the Acceptance and Performance of Internet Banking in Public Sector Banks
Abstract: Internet Banking is one of the most promising areas in which today’s banks deal with. They provide easy and simple method to the customers for various financial transactions without any hurdles. The advanced information technology provides full support to the banks for serving their customers. The acceptance of Internet banking has increased gradually and has attracted more and more customers towards banks. The performance can be one criterion on which …
Published in Journal of Production Research & Management · Vol. 2, Issue 1-2-3, 2012 · pp. 25–36 Read article
-
Standard for Exchange of Products (STEP) based feature Recognition System for Prismatic Parts
Abstract: Feature extraction is considered as the bridge between Computer Aided Design (CAD) and Computer Aided Process Planning (CAPP). This work is concerned with understanding the problem of how to manipulate and extract information from CAD solid models by using Standard for Exchange of Product data model (STEP) files and its further use in downstream manufacturing operations. Emphasis is placed on recognizing and classifying manufacturing features from the Boundary Representation (BREP) …
Published in Journal of Production Research & Management · Vol. 1, Issue 1-2-3, 2011 · pp. 73–91 Read article
-
Methods to Create and Manage Green Supply Chain Management in North Indian Small Scale Industries
Abstract: The major issues originated in this study proposes necessary steps to make the green supply chain, methods to manage it and the result of its implementation. Green supply chain is generally in progress by a finish manufacturer, who has an ecological management system, and needs to bypass good ecological practices to its suppliers. The implementation of green supply chain can be also done by market place necessities. The results contain …
Published in Journal of Production Research & Management · Vol. 5, Issue 2, 2015 · pp. 11–15 Read article
-
A Review on Electric Spring Utilization for Smart Grid Structure in Power Generation
Abstract: The review documents contained in the literature are either completely off the non-critical load or forwarded within a convenient time frame based on the resulting satisfaction. In this study, instead of shifting critical loads to other terms, they tried to adjust the energy consumption of non-critical loads with the help of AC. A rule-based energy management algorithm is proposed, which uses electric springs to use AC microgrids.A new DC/DC converter …
Published in Journal of Semiconductor Devices and Circuits · Vol. 8, Issue 1, 2021 · pp. 37–43 Read article
-
Reddish-orange Emission in Pr3+-V4+ Doped Ions in Calcium Lead Borosilicate Glasses for Photonics and Sensor Applications
Abstract: CaO-PbO-B2O3-SiO2:Pr2O3-V2O5 synthetic glasses were made using a traditional melt-quench method. In the UV-vis-NIR range, the optical absorption spectra show distinct transitions from different energy levels where simple Pr3+ ions are present. The absorption transition of V4+ ion identity exhibit 2T2g®2E2g (spin-allowed) single transition in the UV-vis region Because of the presence of the paramagnetic VO2+ ion, the EPR spectra showed high intensity hyperfine splitting of two sets of eight lines …
Published in Journal of Semiconductor Devices and Circuits · Vol. 10, Issue 3, 2024 · pp. 33–50 Read article
-
Seismic Performance of RCC Elevated Liquid Storage Tank
Abstract: As compared to other Civil Engineering structures elevated liquid storage tank is the 2nd most vulnerable structure under earthquake excitation, reason is more the flexibility and more the mass causes the longer time periods. In most of the cases it is almost equal to or up to 4 seconds. This paper compares the seismic analysis of Intz, Circular and Rectangular shape elevated liquid storage tanks of capacity 250m3 in accordance …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 1, 2020 · pp. 22–32 Read article
-
Analysis of Partially Infilled Frames
Abstract: The design of building structures is usually carried out without considering the effect of masonry infill. Currently, seismic design codes (Eurocode 8-Part 1, ASCE 41-06) contain provisions for the calculation of stiffness of fully infilled frames mainly by modelling infill as a diagonal strut. However, such provisions are not provided for infilled frames with openings. The main objective of the study was to validate the equations relating the lateral stiffness …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 1, 2016 · pp. 1–6 Read article
-
Thermal Response of Thick Beam Subjected to Thermo-mechanical Loads by Using HyperbolicShear Deformation Theory
Abstract: In this paper, a hyperbolic shear deformation theory (HPSDT) taking into account transverse shear deformation effect is presented for thermo-mechanical stress analysis of thick isotropic beam subjected to thermo-mechanical. The displacement field contains two variables. The hyperbolic sine and cosine function is used in the displacement field in terms of thickness Co-ordinate to represent the effect of shear deformation. The most important feature of the theory is that, the transverse …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 22–30 Read article
-
Parametric Study of Tuned Liquid Damper on Multistorey Frame Unit
Abstract: Swimming pools in a skyscraper are not only an entertainment facility but also a boon of a structural design engineer to curb the impact of lateral forces such as wind, earthquake, etc. The usage of swimming pools as liquid tuned damper is a cost effective alternative without having any additional component within the structure. Much of the research to damp the vibration of the structure like base isolation, bracing, in-fills …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 46–54 Read article
-
Effect of Fiber Addition in Geopolymer Concrete: A Study on Comparison betweenNatural and Artificial Fibers
Abstract: Geopolymer concrete is an inorganic polymer concrete, containing no ordinary Portland cement (OPC). It is produced by reacting alumino-silicate source material with alkaline solution. Geopolymer concrete has highly desirable structural engineering properties, which can lead to significant environmental and economic benefits. Fibers in general and polypropylene (PP) fibers in particular have gained popularity in recent years for use in concrete, mainly owing to their low price and excellent characteristics. Alkalineliquids …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 18–24 Read article
-
Development of Controlled Concrete by using Hypo Sludge
Abstract: Over 300 million tones of industrial wastes are being produced per annum by chemical and agricultural process in India. These materials pose problems of disposal and health hazards.The wastes like phosphogypsum, fluorogypsum and red mud contain obnoxious impurities which adversely affect the strength and other properties of building materials based on them. Out of several wastes being produced at present, the use of phosphogypsum, flurogypsum, lime sludge, hypo sludge, red …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 1, 2014 · pp. 16–21 Read article
-
Effects of Weight Fractions on Properties of Aluminium-Fly Ash Metal Matrix Composites
Abstract: With particles of fly ash as the particulate addition, the properties of pure Al can be greatly improved. The incorporation of fly ash brings significant changes in some of its core properties like hardness, density, stiffness, strength, wear resistance. A comparison of the mechanical properties of pure Al have been done with three sets of Al-fly ash composites containing 6, 8 and 10% by weight fly ash which are manufactured …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 44–48 Read article
-
6000 inhibitors for aluminum and its alloys
Abstract: 6XXX series of aluminum alloys suffer from severe corrosion in acidic saline medium. These alloys are used for architectural, automobiles, aviation, household appliances, containers and electronic devices. Organic-inorganic sol-gel hybrid coatings are synthesized on these alloys. Rear earth inhibitors consider lanthanum inhibitors to be better than cerium inhibitors. These contexts discuss epoxy-silica-zirconia by sol-gel coatings, paddy residue, colchicines, rare earth coatings and ionic liquid for composites
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 2, 2019 · pp. 18–25 Read article
-
Studies of Tin Whisker Formation and Destruction
Abstract: This article contains whisker growth in current implements considered in electronics packaging. These surface relief growths are said contemporarily to prevent and save devices after Pb abatement. Vacancy flux at crack created from compressive stresses cause mass transfer to guide oxides for direct and control of whiskers. Logical subject to shift mass from equiax to migrating morphologies of equiax such as columns. Criteria from past theories for Sn whisker growth …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 3, 2020 · pp. 26–34 Read article
-
Report on Microfluidic Flow of Dyed Working Liquids inside the Polymeric Devices
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is engineered by the maskless lithography and indirect bonding technique. Also, total nine individual polymethylmethacrylate (PMMA) based microfluidic devices are fabricated by maskless lithography, hot embossing lithography, and direct bonding technique. Dyed ethylene glycol, dyed ethanol, and dyed aqueous isopropyl alcohol (50% water, 50% IPA) are prepared and used as working liquids to record each surface-driven microfluidic flow. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 22–29 Read article
-
Acetoxylation of o, m Cresol by Electrochemical Process at Graphite Electrode
Abstract: Electrochemical processes remain unique because of the nature of specific products formed and their mode of formation in which current is a reactive input in place of redox reagents. The high yields of the products can be obtained by designing and optimizing the electrolysis. The ordinary chemical procedures are multi-staged and may result poor yields. Therefore the best way for minimizing the pollution is transformation of conventional chemical processes to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 13–21 Read article