Search
1222 articles for “conductivity”
-
ML-Enhanced Smart Sensing Framework for IoT- Based Structural Health Monitoring Using Conductive Polymer Composites
Abstract: The growing demand for intelligent structural health monitoring (SHM) in dynamic infrastructures necessitates flexible sensing systems that are not only mechanically robust but also capable of real-time interpretation. Conventional SHM frameworks often rely on brittle sensor configurations and cloud-dependent processing pipelines, which suffer from latency, limited durability, and poor adaptability under variable loading conditions. Despite recent advances in composite materials and machine learning, current approaches lack a unified framework that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 348–369 Read article
-
Study on Thermal and Electrical Performance of Pani Doped Graphene Composites under Solar Light Irradiation
Abstract: Here in the research work focusses on the study of thermal and electrical performance of PANI doped graphene composites fabricated by chemical way. A sequence of conducting polymer oxidative method done using the polymerization of aniline in the presence of graphene was deliberate under solar light irradiation. The composites were inspected and characterized using spectroscopy and microscopy studies. The thermal/ electrical performance of PANI and PANI doped graphene were evaluated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1134–1146 Read article
-
Fabrication of Polydimethylsiloxane Composites with Nickel Nanoparticles: Unification and Current–Voltage Relationship
Abstract: Polydimethylsiloxane (PDMS)–nickel nanoparticle (NiNPs) nanocomposite films were fabricated and systematically investigated to understand their electrical transport behavior through current–voltage (I–V) characterization. Nanocomposite films with varying Ni nanoparticle filler concentrations (14.88 wt%, 15.77 wt%, and 16.65 wt%) were prepared using a solution-mixing and spin-coating technique, followed by controlled thermal curing. The electrical properties of both pristine PDMS and PDMS– NiNPs nanocomposites were examined over a wide voltage range (up to 800 …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 22–29 Read article
-
Polymer Electrolyte Films Doped with Nanofillers ZnO: Electrochemical and Optical Investigations
Abstract: The electrochemical and optical characteristics of polymer composite electrolyte films doped with zinc oxide (ZnO) nanofillers are thoroughly examined in this work. Because of its superior film-forming capacity, flexibility, and ionic transport properties, poly(vinyl alcohol) (PVA) mixed with potassium iodide (KI) is used as the host polymer electrolyte. To investigate their effects on ionic conductivity, dielectric behavior, and optical transmission, ZnO nanoparticles are synthesized and added to the PVA–KI matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 320–332 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
Investigation of Electronic Transport in Li2O and ZnO Nanoparticles Containing Polypyrrole Systems
Abstract: Polypyrrole systems having nanocrystalline ZnO and Li2O with different compositions (PPy50 + Li2Ox + ZnO(50-x), where x = 0, 2, 4, 6, 8, and 10) have been produced by ball milling. compositions of the type The temperature-dependent DC conductivity of each sample was determined in the temperature range of 313 K to 363 K. The conductivity studies show that Polaron hopping was the conducting mechanism in the material composites. The …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 88–95 Read article
-
Advancement in Biodegradable Equipment for Flexible and Sustainable Electronics
Abstract: Biodegradable electronics are a quickly developing area focused on reducing the environmental impact of traditional electronic waste by using materials that can break down naturally after use. These devices use eco-friendly polymers, nanocomposites, and bio-based materials that maintain electrical function temporarily before safely decomposing. Recent developments show the potential of plant-based polymers, conductive biodegradable composites, and transient materials that support flexible and wearable applications without causing long-term harm to the …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 2, 2025 · pp. 32–37 Read article
-
Thermo-Hydraulic Enhancement of Annular Finned Shell-and-Tube Heat Exchangers Using Epoxy-Based Polymer Composites: A Material–Geometry Coupled CFD Investigation
Abstract: Shell-and-tube heat exchangers remain a backbone of industrial thermal systems, yet their performance is often limited by relatively low shell-side heat transfer and the weight and cost associated with conventional metallic components. In this context, the integration of polymer composite materials offers a promising pathway toward lightweight, corrosion-resistant, and performance-tunable heat exchanger designs. The present study investigates the thermo-hydraulic performance of a straight-tube shell-and-tube heat exchanger equipped with annular fins, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 669–684 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Enhanced Thermal Stability and Thermophysical Properties of High Density Polyethylene Based Polymer Composite Synthesized Through Compression Moulding Route
Abstract: Polymer composite materials attract researchers as polymers can be filled with different fillers to get desired properties. Thermophysical properties of HDPE-silicon composite is reported in the present study. HDPE-Si composite was synthesized by hot compression and molding technique for different silicon volumetric ratio. Thermal conductivity as well as thermal diffusivity was found to be enhanced significantly on increasing the filler volumetric ratio. Thermal conductivity value for 20 volume % composite …
Published in Journal of Polymer & Composites · Vol. 11, Issue 5, 2023 · pp. 1–16 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
Advanced Functional Nanocomposites: Graphene Oxide Integration into Polyvinyl Alcohol Matrix
Abstract: This research explores how incorporating graphene oxide (GO) into polyvinyl alcohol (PVA) can improve its mechanical and thermal characteristics, with the goal of creating multifunctional nanocomposites suitable for advanced technological applications. GO was introduced into the PVA matrix at 0.5, 1, and 2 wt% via a scalable solution casting method. The resulting nanocomposites were characterized mechanically, thermally, and spectroscopically. Tensile testing revealed a significant improvement in mechanical performance, with tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 50–59 Read article
-
Low density polyurethane based antistatic coating for PU flexible foam for launch vehicles
Abstract: Polyurethane (PU) is a multi functional polymer prepared by using more than two types of monomers. The unique properties of PU come from monomers, thus broadening the applicability of PU in many different sectors. Furthermore, the antistatic property of PU coatings can be improved by the addition of conductive fillers into matrix thus broadening its application in the manufacture of electronic products, aerospace systems and daily necessities and so on. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 25–30 Read article
-
Development of Self-Healing Circuit Boards Using Shape Memory Polymer Composites
Abstract: This study investigates the influence of temperature, humidity, and nanofiller type on the electrical and structural performance of advanced polymer nanocomposites for self-healing circuit applications. Particular attention was given to conductivity retention and the morphological behavior of carbon nanotubes (CNTs), graphene, and silver nanoparticles (AgNPs). Results show that conductivity decreased under elevated thermal–humidity conditions, reflecting the role of environmental stress in material degradation. Among the tested systems, AgNP-based composites achieved …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 746–770 Read article
-
Hybrid Material Systems for Flexible Electronics Electro-Mechanical Performance and Future Prospects
Abstract: Flexible electronics are transforming the landscape of modern electronic systems, enabling devices that are lightweight, stretchable, and adaptable to complex surfaces. These technologies are particularly impactful in applications such as wearable health monitors, soft robotics, energy harvesting systems, and implantable biomedical devices. At the heart of this evolution are hybrid material systems—engineered composites that combine organic polymers and inorganic nanomaterials to achieve synergistic electro-mechanical properties. These materials address the limitations …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 7–12 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Role of Clay Liners in Municipal Solid Waste Landfills: A Review
Abstract: Rapid population growth has significantly increased the generation of municipal solid waste (MSW) in urban and suburban regions. Disposal of MSW in landfills without proper liner systems may lead to leachate migration and subsequent contamination of groundwater and surrounding soils. The use of liner systems at the base of landfills is therefore essential to minimize leachate percolation and protect the environment. Geosynthetic clay liners (GCLs) and compacted clay liners (CCLs) …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 2, 2026 · pp. 50–56 Read article
-
Nano-enhanced Bio-based Phase Change Materials: A Brief Review
Abstract: The high latent temperatures and variable melting points of bio-based phase change materials make them ideal for thermal control. This covers heat regulation for medical and pharmaceutical items, building comfort, and high-end electronics and automobiles. In recent years, research and application of energy-saving materials and technologies in buildings has increased strength. Modern construction technology aims to keep old and new structures energy efficient. TES employing PCMs is an energy-efficient approach. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 15–27 Read article
-
Parametric Analysis of Energy Saving in Building Walls by Applying Various Insulation Materials
Abstract: The parameters which include Present Worth Factor, the wall structure, thermal conductivity of insulation material, thickness of insulation and the heating /cooling load of building, affect the energy savings in buildings. This study focuses on parametric analysis of the energy savings for building walls by using insulations (Expended Polystyrene and Glass wool). The annual energy requirements of house have been obtained by heating Degree-Days (DD) concept. For economic analysis, the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 113–118 Read article