Search
111 articles for “XRD results.”
-
Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering
Abstract: Semiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in electronics industry, as silicon is brittle in nature and has low efficiency, which makes it unsuitable for transparent and flexible device. Zinc oxide (ZnO) is emerging as popular choice of researchers due to its wide range of properties, abundancy and non-toxicity. This work explores the properties of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 50–56 Read article
-
Optimized Utilization of Kota Stone Slurry Waste in Fly Ash–Based Geopolymer Mortar: A Taguchi-Driven Approach
Abstract: The large-scale generation of stone-processing wastes presents a critical sustainability challenge and an opportunity for value-added reuse in construction materials. This study develops a high-performance fly ash geopolymer mortar by partially replacing Class F fly ash with Kota stone slurry waste (KSSW) and optimizing the key mix parameters using a Taguchi design framework. Five governing factors—binder replacement level, NaOH molarity, sodium silicate–to–sodium hydroxide ratio (SS/SH), curing temperature, and alkaline solution-to-binder …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 426–445 Read article
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Development and Multiscale Characterisation of a Sustainable Hybrid Polymer–Cementitious Composite
Abstract: The development of sustainable polymer–cementitious composites has gained increasing attention as a strategy for reducing virgin resource consumption while improving the mechanical and functional performance of cement-based materials. This study investigates a hybrid composite incorporating sugarcane bagasse ash (SCBA), distilled sewage water (DSW), styrene–butadiene rubber (SBR), and polypropylene (PP) fibres. Four mixtures, namely C0–C3, were developed by progressively increasing SCBA from 0 to 15%, DSW from 0 to 20%, SBR …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
PREPARATION AND CHARACTERIZATION OF ACTIVATED CARBON FROM ORANGE PEELS
Abstract: In this study, an attempt was made to establish Green Energy from agricultural waste (orange peels). Activated carbon (AC) produced from orange peels with chemical activation agent i.e. phosphoric acid (H3PO4) by carbonization activation process. The influences of the process, carbonization temperature and activation temperature (600 °C) for time 2 hour with H3PO4 of 1:1 ratio on the resulting activated carbon properties were evaluated. The AC is an excellent adsorbent …
Published in Journal of Catalyst & Catalysis · Vol. 5, Issue 1, 2018 · pp. 15–20 Read article
-
Effect of Gamma and Electron Beam Irradiations on Crystalline and Gelatinization Properties of Edible Potato Starch
Abstract: Exposure of food material to radiation causes changes in crystalline (damage of crystal structure / lattice distortion), and gelatinization (digestive)properties. Potato starch (PS) is one of the important globally used food supplement in different forms like chips, curries, cusins etc. During its use the PS is exposed to radiations, altering its molecular structure (due to chain cleavages) and bring changes in structural and physical properties ; sometimes ill – effects …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 113–127 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Synthesis of Isoamyl Acetate (Banana oil) Using Fly Ash Supported Nano Crystalline Solid Acid Catalyst
Abstract: A novel fly ash supported solid acid catalyst (HClO4/FA) has been synthesized by using F-type fly ash and HClO4 as precursor. The variation of surface and physicochemical properties of the fly ash by activation methods resulted in improved acidity and therefore, catalytic activity for acid catalyzed esterification reactions. The HClO4/FA catalyst was characterized by XRF, XRD, FT-IR, SEM and BET surface area. The catalytic performance of HClO4/FA catalyst was evaluated …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 2, 2017 · pp. 1–8 Read article
-
Preparation and Characterization of Activated Carbon from Bamboo by Chemical Activation
Abstract: In this study, an attempt was made to prepare an activated carbon (AC) from bamboo by chemical activation method. Phosphoric acid (H3PO4) was used as a chemical activation agent for the production of AC from bamboo under conditions of temperature 600 °C for 1 h. The AC is an excellent adsorbent and its applications are widely described in literatures. Prepared ACs, are characterized by standard methods XRD, SEM, FTIR, XRF. …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 1, 2016 · pp. 1–6 Read article
-
Energy Storage Properties of hy-BST3/PVDF Nanocomposite for Dielectric Capacitor Application
Abstract: In the present research work, we have synthesized the ferroelectric ceramic Ba0.7 Sr0.3TiO3 (BST3)/PVDF (Polyvinylidene difluoride). Polymer nanocomposites for energy storage applications, designed to synergistically combine the high dielectric permittivity of hydroxylated barium strontium titanate (hy-BST3) with the mechanical flexibility and electroactive properties of poly(vinylidene fluoride) (PVDF). Hydroxylated Barium Strontium Titanate (hy-BST3) has been synthesized using the sol-gel combustion method followed by surface hydroxylation using H2O2 to achieve nanoscale particles …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 908–918 Read article
-
Synthesis of Silver Nanoparticles of Cissus Quandrangularis and It’s Virtual Screening Against Gastric Cancer
Abstract: Gastric cancer, also known as stomach cancer, is the third leading cause of cancer-related deaths globally and remains a major health challenge due to its poor prognosis and high mortality, largely attributed to late-stage diagnosis. In this context, plant-based nanomaterials are gaining momentum for targeted therapeutic applications. Cissus quadrangularis, a medicinal plant native to India from the Vitaceae family, is traditionally used for its diverse healing properties. Its stem, in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1551–1569 Read article
-
Synthesis of Copper Nanoparticles using Alternanthera Sessilis Linn Leaf Aqueous Extract and their Characterization
Abstract: The current study describes the biogenesis of Cu NPs using an aqueous extract of the leaf of Alternanthera sessilisLinn. (A.S). recently, biological synthesis of nanoparticles has gained popularity due to the fact that it is eco-friendly, simple, cost-effective, non-hazardous, and extreme conditions. The aqueous extract of Alternanthera sessilisleaf contains enoughterpenoids, carbohydrates, and flavonoids to convert metal ions into metal and thus stabilize the resulting nanoparticles. The UV-visible spectrophotometer confirmed the …
Published in Journal of Polymer & Composites · Vol. 10, Issue 2, 2022 · pp. 14–28 Read article
-
Development of Polymer–Micro-Aluminum Composites for Lightweight Engineering Applications
Abstract: This research focuses on the systematic development of polymer–micro aluminum composites, with polypropylene (PP) and epoxy selected as representative polymer matrices. Micro aluminum fillers in the range of 5–25 wt.% were incorporated through melt blending (PP) and casting (epoxy), and the resulting composites were evaluated in terms of mechanical performance, microstructural integrity, and crystalline characteristics. Tensile strength of the composites increased significantly, from 31 MPa in neat PP to 44 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1–12 Read article
-
Electron beam irradiation studies of polyethylene maleic anhydride on their Chemical and Thermal properties.
Abstract: The electron beam (e-beam) irradiation effects on polyethylene maleic anhydride (MANPE) are investigated by spectroscopic and thermal methods. The MANPE irradiated with electron beam to a radiation dose of 30, 60 and 90 K Gy and the resultant changes in their chemical structure and thermal properties have been investigated by Electron spin resonance (ESR), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy …
Published in Journal of Polymer & Composites · Vol. 6, Issue 2, 2018 · pp. 17–30 Read article
-
Experimental Studies on the Mechanical and Microstructural Properties of Sustainable Concrete Incorporating Palm Oil Industrial Waste
Abstract: Diving into the world of concrete, normal concrete is widely used in construction but poses environmental challenges due to significant carbon dioxide emissions from cement production. Incorporating oil palm shells (OPS) and palm oil fuel ash (POFA) into concrete offers a sustainable alternative, utilizing waste products from the palm oil industry and reducing environmental impact. Experimental studies have examined the use of OPS and POFA as partial replacements for coarse …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 19–40 Read article
-
Catalytic Performance Improvement in Polymer Derived Nanostructures for Fuel Cell Applications
Abstract: The performance and operational lifetime of PEMFCs are closely linked to the catalytic activity and durability of cathode electrocatalysts. In this research, a polymer-derived cobalt–iron nitrogen-doped carbon (CoFe–N/C) nanostructured catalyst is developed to enhance the ORR performance for PEMFC applications. PAN and melamine serve as nitrogen-rich polymer precursors, while cobalt and iron salts generate highly dispersed metal–nitrogen active sites within a porous carbon matrix through thermal treatment at 900 °C. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 968–979 Read article
-
Exploring the Synergy of High Performance Composite Concrete Strength and Sustainable Construction Practice
Abstract: This research evaluates how the combination of industrial waste materials optimizes composite concrete structure strength and services the interests of sustainable construction development. This research examines two major environmental problems stemming from ordinary Portland cement clinker manufacturing and landfill accumulation of non-biodegradable porcelain waste. The research employed alccofine dosage of 16% as a supplementary cementitious material (SCM) with high pozzolanic activity to combat these problems. Processed porcelain waste aggregates filled …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 47–58 Read article
-
Synthesis of Copper Oxide Nanoparticles using Ultrasound for the Treatment of Textile Organic Dyes (Reactive Black 5 and Basic Blue 3)
Abstract: This paper describes the ultrasound assisted synthesis of copper oxide (CuO) nanoparticles using copper nitrate trihydrate and ammonium carbonate as reactants. The resultant product, copper carbonate was calcined at 400°C which was chosen based on the thermogravimetric analysis of copper carbonate precipitate. The final product CuO nanoparticles characterized by X-Ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDAX), particle size analyzer (PSA) and Brunner-Emmet-Teller surface area analyzer (BET) …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 3, 2015 · pp. 16–22 Read article
-
Steam Activated Carbon Material from the Fruit Shells of Sterculia foetida for Energy and Environmental Applications
Abstract: Steam activation of the biochar from Sterculia foetida forms a green route for the synthesis of activated carbon material with high specific surface area (1017 m2/g). The corresponding value with a chemical activating agent (K2CO3) is much lower (596 m2/g). Structural parameters of the activated carbon materials were deduced from XRD studies. Moreover the thermal stability of the activated carbon materials from steam activation is nearly 100°C higher than that …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 1, 2024 · pp. 23–33 Read article
-
Internal Lattice Structure and Local Order of Ge Atoms Structure in Amorphous Mn doping GeTe Thin Films
Abstract: Phase-change Magnetic materials (PCMMs) represent the leading candidates for universal data storage devices, which exploit the large difference in the physical properties of their transitional lattice structures. Here, an experimental study was done to investigate the internal lattice structure and local order of Ge atoms in amorphous Mn doping GeTe thin films. The microstructure of the as-deposited films of Ge1-xMnxTe thin films (with x = 0.06, 0.13, 0.52 and 0.61) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 3, 2020 · pp. 9–15 Read article