Search
81 articles for “Interface characterisation”
-
Improving the Mechanical and Interfacial Properties of Bhendi Fiber via Chemical Surface Treatments
Abstract: Because of its primary benefits—moderate strength and stiffness, low cost, and being a renewable, degradable, and ecologically friendly material—natural fibers are believed to have potential use as reinforcing agents in polymer composite materials. Due to their inherent hydrophilicity, they have a tendency to retain moisture, which can impair or soften the fibers' adhesion to the surrounding matrix. This can have an impact on the performance of composite materials used in …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 22–32 Read article
-
Structural, Optical, Surface and Gas-Sensing Properties of rGO/Sn1-xZnxO₂ Nanocomposites
Abstract: rGO/Sn₁₋ₓZnₓO₂ nanocomposites with x = 0.00–0.75 were synthesized by sol–gel auto-combustion followed by wet impregnation with reduced graphene oxide. The adopted synthesis route enabled homogeneous Zn incorporation into the SnO₂ matrix and uniform distribution of rGO, leading to improved structural integrity and interfacial contact between the two components. XRD confirmed a dominant tetragonal cassiterite SnO₂ structure, while FTIR, FESEM, EDS, UV–visible, and BET analyses verified oxide–rGO coupling, Zn-dependent structural modification, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Techniques of Atomic Structure Orbit Potential of The Frequency Characteristics of Silicon Element
Abstract: This study explores the technological applications and material integration of semiconductor materials, with a focus on their electronic properties and practical implementations. The investigation primarily addresses four key objectives: analyzing the electronic band structure and density of states (DOS) of semiconductor materials, evaluating the band alignment in heterojunctions, and integrating these materials into practical technological applications. Using a simplified tight-binding model, we compute and plot the electronic band structure of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 16–32 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
Characterization and Fabrication of Particle Board from Banana Fiber and Sawdust as A Hybrid Composite
Abstract: The current global landscape emphasizes the search for eco-friendly and regenerative materials. Utilizing environmentally available fibers in conjunction with polymeric resins through efficient manufacturing processes offers a cost-effective solution with high-quality standards. Polymer matrix composites with fiber reinforcements possess several advantages, including low production costs, ease of fabrication, and improved material properties, making them applicable in a wide range of industrial contexts. This paper emphasizes the creation of Particle boards …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 192–200 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
Diglycidyl Ether of Bisphenol A (DGEBA) Based Epoxy Sizing Agent Induces Surface Polarity in Carbon Fibers†
Abstract: Determination of the chemical structure and composition of the sizing agent is a challenge as its concentration is low, varying in the range from ~0.5 wt.% (for polyacrylonitrile, PAN, based carbon fibers) to ~1 wt.% (for pitch-based carbon fibers). Moreover, such a piece of knowledge is vital for designing compatible polymer matrices to prepare CFRPs for diverse applications. As a result, the sizing layer that is coated on the carbon …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 24–34 Read article
-
Fabrication and Characterization of PLA-CSP Composites via FDM for Biodegradable Food Packaging
Abstract: In light of the growing need for environmentally friendly alternatives to conventional plastic packaging, this study presents the design of a food-grade, biocompatible packaging material composed of Polylactic Acid (PLA) and packed with coconut shell powder (CSP). One of the most well-known thermoplastic polymers, PLA is produced from renewable resources like sugarcane or maize starch. Its nontoxicity, biodegradability, and adherence to food safety standards and regulations provide energy. Unfortunately, PLA's …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1016–1025 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Sustainable Polymer Composites Reinforced with Natural Fibers: Processing, Properties, and Applications
Abstract: The environmental footprint of synthetic plastics has led to extensive studies of sustainable polymer composites reinforced with natural fibers like jute, sisal, hemp, flax, and coir. These biocomposites offer a greener solution to the conventional petroleum-based materials, which blends biodegradability and competitive mechanical characteristics. The present paper focuses on the processing methods, mechanical and thermal characteristics, and the possible application of natural fiber-reinforced polymer composites (NFRPCs). A survey of 50 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1663–1670 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Preparation and Characterization of Polyolefins/Inorganic Nano-Filler Nanocomposites via Melt Extrusion Process
Abstract: This work used the melt-mixing method followed by compression molding to create nanocomposites of polyolefins, such as high-density polyethylene and linear low-density polyethylene, packed with both surface-modified and unmodified nano-calcite. The study examined the effects of varying concentrations of nano-calcite, which had been modified using isopropyl tri-(dioctylpyrophosphato) titanate, on the mechanical properties, morphological characteristics, and flow behavior of the resulting nanocomposites. A corotational twin-screw extruder was utilized to manufacture three …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 3, 2024 · pp. 35–43 Read article
-
Microstructural Design and Functional Properties of Polycrystalline Materials
Abstract: Polycrystalline materials, composed of an aggregate of crystallites or grains, are foundational to modern engineering applications due to their versatile functional properties. The microstructural design—encompassing grain size, shape, orientation, phase distribution, and grain boundary characteristics—plays a pivotal role in determining mechanical, thermal, electrical, and magnetic behavior. This abstract explores the intricate relationship between microstructure and functionality, emphasizing how tailored processing techniques such as thermomechanical treatments, sintering, and additive manufacturing can …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 16–20 Read article
-
Thermal and Microstructural Evaluation of Natural-Glass Fiber Hybrid Composites: Sustainable Alternatives to Synthetic Materials
Abstract: The scope of engineering requirements for composite materials, which mix features from several elements engaged in engineering applications to enable greater performance, cannot be adequately understood in this way. The most recent of these materials are hybrid composites, which combine synthetic and natural fibers, particularly glass fibers, and are anticipated to create new, promising materials in terms of their ties to cost, performance, and consistency. From the perspective of their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1275–1285 Read article
-
Advanced Solid-State Battery Technologies for Sustainable Energy Storage
Abstract: The increasing global demand for sustainable and high-performance energy storage systems has accelerated research in advanced battery technologies. Conventional lithium-ion batteries, while widely used in portable electronics, electric vehicles, and grid storage systems, face limitations such as safety risks, limited energy density, slow charging rates, and degradation over repeated cycles. To overcome these challenges, advanced solid-state battery technologies have emerged as a promising solution for next-generation energy storage applications. This …
Published in International Journal of Solid State Innovations & Research · Vol. 4, Issue 1, 2026 Read article
-
Alternating Inertia-Based Virtual Synchronous Machine Control for Improved Frequency Regulation of Energy Storage Systems
Abstract: The rapid integration of renewable energy sources (RESs), particularly solar photovoltaic and wind energy systems, has significantly increased the penetration of power electronic converter-based distributed generators (DGs) in modern power systems. While these technologies provide substantial environmental, economic, and sustainability benefits, their widespread deployment has introduced new operational challenges. One of the major concerns is the reduction of system inertia and damping due to the replacement of conventional synchronous generators …
Published in Journal of Power Electronics and Power Systems · Vol. 16, Issue 2, 2026 Read article
-
Ag₂S–Ag Nanocomposites: A Bottom-Up Approach to Enhance Thermoelectric Power Factor at Near Room Temperature
Abstract: The intrinsic ductility, low toxicity, and naturally occurring abundance of silver sulphide (Ag₂S) have made it a potential thermoelectric material in recent years. However, high electrical resistance severely limits its practical application. Here, we present a thorough analysis of how metallic Ag nanoinclusions affect the structural, electrical, and thermoelectric characteristics of Ag₂S nanocomposites made using a simple bottom-up polyol approach. (Ag₂S)₁₋ₓAgₓ nanocomposites with an Ag content ranging from 0 to …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 40–55 Read article
-
Smart Biopolymer–PCM Composite Modules with Embedded Wireless Thermal Sensing for Autonomous Energy Storage Applications
Abstract: The development of multifunctional polymer composite systems for intelligent thermal energy storage has gained significant attention due to the increasing demand for sustainable and autonomous thermal management technologies. In the present study, a wireless-integrated biopolymer–phase change material (PCM) composite module embedded with thermal feedback sensors was successfully fabricated and experimentally investigated for advanced thermal energy storage applications. Polylactic acid (PLA) was employed as the biodegradable polymer matrix, while paraffin wax …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 193–205 Read article
-
Polymer Electrolyte Films Doped with Nanofillers ZnO: Electrochemical and Optical Investigations
Abstract: The electrochemical and optical characteristics of polymer composite electrolyte films doped with zinc oxide (ZnO) nanofillers are thoroughly examined in this work. Because of its superior film-forming capacity, flexibility, and ionic transport properties, poly(vinyl alcohol) (PVA) mixed with potassium iodide (KI) is used as the host polymer electrolyte. To investigate their effects on ionic conductivity, dielectric behavior, and optical transmission, ZnO nanoparticles are synthesized and added to the PVA–KI matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 320–332 Read article