Search
318 articles for “Heat rate”
-
Investigation of Heat Transfer in Concentric Annuli with Perforated Inserts
Abstract: The increasing necessity for saving energy and material imposed by the diminishing world resources and environmental concerns have prompted the development of more effective heat-transfer equipment with improved heat-transfer rates. The hydrodynamic boundary layer acts as main resistance for the transfer of heat from tube surface to fluid or vice-versa and many researchers are trying to improve the convective heat transfer rate with inserts in tubes to break the boundary …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 1, 2018 · pp. 56–68 Read article
-
Enhancing Engine Efficiency and Reducing Emissions: A Comprehensive Review of Air Calorimeter Technology
Abstract: The article talks about the idea behind this project to pre-heat the intake air that passes through the carburettor to increase a petrol engine's fuel efficiency. The vaporization of petrol in the carburettor is influenced by the humidity of the surrounding air. Therefore, vaporization can be facilitated, and full combustion can be accomplished by preheating the carburettor's incoming air for a significant amount of time. Additionally, by lowering the amount …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 8–13 Read article
-
Assessment of Engine Performance with Perforated and Solid Fins
Abstract: Abstract Fins increases the heat transfer from a heat generated device by increasing the surface area of it. Fin with holes or perforated fins increases the surface area available for heat removal but also increases the intensity of the air flow, which further increases the heat removal. A two wheeler engine with fins having circular perforation has been designed in the present work. ANSYS 16.0 has been utilized to solve …
Published in Journal of Thermal Engineering and Applications · Vol. 3, Issue 3, 2016 · pp. 1–7 Read article
-
A Study and Thermal Analysis of Automobile Radiator Using Nanofluids
Abstract: Over past few decades, number analysis has been carried out by the researchers and academicians in the radiator for it’s efficiency. It is purely depend on the application of fluid. Conventional fluids such a water, ethylene glycol and sodium are normally used as heat transfer fluids in radiator various techniques are applied to improve the heat transfer the used of additives is a technique applied to increase the heat transfer …
Published in Recent Trends in Fluid Mechanics · Vol. 3, Issue 1, 2016 · pp. 9–14 Read article
-
Fluent Simulation & Analysis of Earth Heat Exchanger with Air as a Cooling Medium
Abstract: Because of the temperatures differential between the environment and the subsurface, an Earth Air Tube Heat Exchanger (EATHE) uses the thermal energy of the ground for air conditioners in the winter and air cooling in the summer. Everyone can lower the amount of energy needed for space heating or cooling with the aid of EATHE. However, it is challenging to create precise energy simulations and designs for calculating surface heat …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 1, 2024 · pp. 18–26 Read article
-
Optimization of Continuous Cast Steel in Steel Manufacturing Industry
Abstract: Steel industry has given a wide exposure for the researchers, academicians and professionals to deal with even minute plethora and dots to come up with new innovations and creativity. In order to increase the affordability and accessibility, the continuous casting is optimized through various processes and levels. Optimization is required to be done on discovering a range of water flow rate, material properties, thermal heat transfer factors and oscillation parameters …
Published in Trends in Mechanical Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 7–11 Read article
-
Human Comfort inside the Vehicle by Using Internal Cooling Materials
Abstract: Human comfort is the most important aspect of the vehicle. Due to harsh sunlight and many other climatic conditions the human comfort level is breached. This breaching in the comfort level results in the abnormal physical conditions of the human. The occupants may feel uncomfortable which may cause unpleasant ride and journey. The most common problem encountered under this condition is the overheating of the vehicle -cabin due to parking …
Published in Journal of Nuclear Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 52–58 Read article
-
Dynamic Mechanical Analysis of Carbon Fiber Reinforced Polymer Composites
Abstract: This study investigates the thermal decomposition and mechanical properties of Fiber-Reinforced Polymer Composites (FRPCs) using Dynamic Mechanical Analysis (DMA). The research focuses on improving the recycling and recovery process of Carbon Fiber-Reinforced Polymers (CFRPs), addressing environmental concerns regarding their disposal. By analyzing the effects of different heating rates (5°C and 10°C per minute) and atmospheric conditions (nitrogen, oxygen, and a combination of both), the study identifies optimal parameters for maximizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 386–393 Read article
-
Feasibility and Spontaneity of Jetfans for Aircraft Fire Safety
Abstract: Fires have been a serious threat yet to be comprehensively addressed in safe Air transportation. The fire occurrence in cabin is well etched by the unpredictable fire behavior transiting to larger high potential fires. The work investigates feasibility of automated ventilation jet-fan in the Aircraft to minimize fire spreading and enhance control action time thus reducing fire hazards. Present work proposes utilization of Jetfan as a potential fire safety system …
Published in Journal of Aerospace Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 1–18 Read article
-
Experimental Study on Heat Transfer Enhancement in a Mini Channel Heat Sink Using Al2O3/Water Nanofluid
Abstract: In this present work, experimental investigation of heat transfer enhancement using Al2O3/water nano fluid in a mini channel heat sink is carried out. Efforts have been undertaken to explore the forced convective heat transfer performance of Al2O3/water nanofluid having 0.1% volume fraction of Al2O3 as the coolant in a copper mini channel heat sink. The mini channel heat sink fabricated consists of 15 parallel rectangular mini-channels of length 50mm with …
Published in Journal of Thermal Engineering and Applications · Vol. 1, Issue 2, 2014 · pp. 29–38 Read article
-
A review on the Enhancing Heat Exchanger Efficiency with CuO/Water Nanofluid in a Shell and Helical Coil System
Abstract: Over the years, there has been a lot of focus on improving heat transmission by utilizing various approaches in an effort to make heat exchangers smaller and less expensive. The following methods have been found to be the most successful in increasing heat transfer rate in heat exchangers: Nano-Fluids, first (3) Rubbing heat exchanger surfaces rough. (2) Inserting fluid tabulators. However, a combination of all three approaches or any two …
Published in Trends in Mechanical Engineering & Technology Read article
-
Characterization of Thermochemical Properties and Combustion Behavior In AP/HTPB Polymer Composite Solid Propellant for Enhanced Performance
Abstract: The thermal decomposition of solid propellants containing hydroxyl-terminated polybutadiene (HTPB) binder is a complex process, driven by multiple interacting chemical and physical factors. Solid propellant combustion characteristics are profoundly influenced by the composition of the propellant, the conditions of pressure, the starting temperature, and a range of aero-thermochemical parameters. The paper explores the influence of polymeric structure in the HTPB binder on thermal decomposition characteristics of the AP/HTPB composite propellants …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 502–511 Read article
-
Comparative Analysis of Supercritical Boiler efficiency with Indian and Imported Coal under Indian Condition.
Abstract: Due to the growing demand for generating and the depletion of basic resources, power plants with larger capacity and higher efficiency are becoming increasingly necessary. In this context, Governments and private sectors are going to invest huge resources to construct power plants with super-critical units working on Indian as well as imported coal (Indonesian & South African). Supercritical technology is always embraced all over the world, and India is no …
Published in Journal of Thermal Engineering and Applications · Vol. 10, Issue 2, 2023 · pp. 31–36 Read article
-
A Review: Distortion Control in 20MnMoNi55 Material Using GTAW and SAW Process
Abstract: Gas tungsten arc welding (GTAW) is high quality and high precision welding process which is suitable for welding thin metals. Inert gases such as helium and argon, carbon dioxide, nitrogen etc. are used as shielding gases to prevent the weld bead from air, dust and other contaminations in welding. There are so many welding process parameters affecting the weld quality in GTAW. Important process parameters which mainly affect the weld …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 3, 2016 · pp. 34–38 Read article
-
Design and Analysis of of Fins for Air Cooled Engine by Varying its Geometry & Material - A Review
Abstract: Fins are mechanical structures which are used to cool various structures via the process of convection to facilitate this, fins are provided on the outer surface of the cylinder. The cooling fins allow the wind to move the heat away from the engine. For fins, material like aluminium alloy is widely used. In most of cases simple fins geometry is preferred such as rectangular fins. . The heat transfer rate …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 41–45 Read article
-
Thermal Degradation Kinetics and Activation Energy of Recycled High-Density Polyethylene/Fly Ash Composites at Varying Filler Loadings
Abstract: The ever-increasing plastic waste and coal fly ash are a serious environmental problem, which have to be addressed with effective recycling methods that transform plastic waste and coal fly ash into high value-added composites of good thermal properties. Although the use of recycled high-density polyethylene (HDPE) is an area of interest, the effect of fly ash reinforcement on thermal degradation kinetics and activation energy is still poorly characterized, and a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
A Review on Test Facility for Measuring Pressure Drop in Hydroformed Cryopanel
Abstract: Cryopump is a vacuum pump that pumps the gases and vapors by condensing them on a cold surface, by adsorption on porous surfaces or by trapping mechanism. Helium gas which is very light can only be pumped by Cryoadsorption cryopump. Cryoadsorption cryopump cannot be used when working for continuous operation as it pumps the effluent till the saturation state is achieved. Then the absorbed gases are required to be removed …
Published in Recent Trends in Fluid Mechanics · Vol. 2, Issue 1, 2015 · pp. 21–25 Read article
-
Experimental Investigation on a Diesel Engine Fuelled with Blends of Karanja Biodiesel and Diesel: Combustion and Performance Studies
Abstract: With the stock of fossil fuels diminishing throughout the world and demand for energy based comforts and mobility ever increasing, time is ripe that we strike a balance between energy security and energy usage. Moreover having uplifted to such a sphere of engineering excellence, reverting back to the ages of the bull carts will prove next to impossible thereby compelling us to search for a basket of alternative fuels to …
Published in Trends in Mechanical Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 41–52 Read article
-
A Review: Effect of Different Shielding Gas on Weld Penetration in Stainless Steel in GTAW Process
Abstract: Gas tungsten arc welding (GTAW) is high quality and high precision welding process which is suitable for welding thin metals. Inert gases as helium and argon, carbon dioxide and nitrogen are used as a shielding gas to prevent the weld bead from air, dust and other contaminations in welding. There are so many welding process parameters which affect the weld quality in GTAW. Important process parameters which mainly affect the …
Published in Trends in Mechanical Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 13–18 Read article
-
INFLUENCE OF HEAT TREATMENT ON MECHANICAL PROPERTIES OF MILD STEEL
Abstract: . In manufacturing and metallurgical industries, the metal is heated above the critical temperature in which micro-structural transformation has been take place, to change the desirable microstructure and mechanical properties such as tensile strength, hardness, toughness, fatigue strength etc. The physical properties have been obtain through heat treatment mainly depends upon the heating temperature, rate of heating and the cooling medium. Some of the widely used cooling mediums are air, …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 5, Issue 1, 2018 · pp. 25–30 Read article