Search
79 articles for “Absorption test”
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Experimental Investigation of Tensile Strength of Bamboo Fiber/Synthetic Glass Fiber
Abstract: In this work, hybrid fiber reinforced composites (HFRCs) with enhanced mechanical and physical characteristics are created by reinforcing composite laminates using a blend of natural bamboo fiber and synthetic glass fiber. The primary goal of the inquiry is to assess these composites' tensile and impact properties. In comparison to non-hybrid composites, the hybrid composite, which consists of two layers of bamboo fiber and one layer of bidirectional glass fiber, had …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1700–1710 Read article
-
Production of Floor Tile Using Recycle Low Density Polyethylene And Groundnut Shell as a Filler
Abstract: The production of flow tile using recycled low density polyethylene and groundnut shell as filler with the particle size of 120µm was carried out in this project . 10 pphr of all the fillers were weighed and mixed with recycled low density polyethylene on two roll mill machines. The result on this work showed that on FTIR five functional groups were identified and they are; OH, C-H, CH2/CH3, C-O, C=H. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 1, 2024 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Physico-Mechanical Behavior of Euphorbia Abysinica and Wood Chips Composite
Abstract: In this study, we prepared composite test specimens from Eucalyptus chip particles of sizes 0.5 mm, 1 mm, and 2 mm combined with Euphorbia-Abyssinica fluid at an 80:20 mass ratio. We produced the particleboard under a compression load of 150 KN and kept it in the compression machine for thirty minutes inside the mold. After removing it from the machine, we secured it with C-clamps for twenty-four hours. We covered …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
AR Coatings in Solar Efficiency: A Study
Abstract: In the global race toward renewable energy dominance, the focus often fixes upon the exotic materials within the photovoltaic cell: silicon type, junction structure, or emergent perovskites. Yet, the most immediate and profound efficiency gains are often secured by a layer so thin it is invisible, a film of optimized material applied directly to the glass interface: the Anti-Reflective (AR) coating. These coatings are not merely an expensive aesthetic choice; …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 26–35 Read article
-
Durability Assessment of Self Compacting, Self Curing Concrete Incorporating Crushed Rock Powder and Mineral Admixtures
Abstract: Curing plays a crucial role in achieving the desired strength, characteristics, and durability of concrete. Negligent curing practices can lead to adverse effects on hydration and mechanical properties of concrete. In recent times, self-curing concrete has gained significant attention due to its potential in reducing water loss through the use of self-curing agents. The Present Research study focus on investigation on durability characteristics of self-curing self-compacting concrete using crushed rock …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 25–35 Read article
-
Continuous Glucose Monitoring Device
Abstract: Managing diabetes effectively requires regular monitoring of blood glucose levels, which is traditionally done through invasive methods like finger-prick tests. This work introduces a non-invasive blood glucose monitoring system utilizing the MAX30100 pulse oximeter sensor and Internet of Things (IoT) technology. The system estimates glucose levels by analyzing infrared (IR) light absorption properties, eliminating the need for direct blood sampling. Key components include the ESP32 microcontroller, cloud-based data storage, and …
Published in Journal of Electronic Design Technology · Vol. 16, Issue 3, 2025 · pp. 1–6 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Tailoring the Compressive Behavior of Tetra-Chiral Auxetic Structures through FDM Process Parameters
Abstract: This research evaluates how fused deposition modeling (FDM) fabrication process parameters affect the compressive behavior of tetra-chiral auxetic structures created from Polylactic Acid (PLA). Auxetic materials have a number of useful properties, including reversible deformation and high-energy absorbing capabilities, which are beneficial to creating ultra-lightweight structural, protective, and shock-resistance designs. Among the available auxetic topologies, the tetra-chiral configuration is particularly attractive for engineering use, because its rotation-dominated node–ligament deformation gives …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
New Generation Waste Material as Sustainable Ingredient in Concrete: An Experimental Approach
Abstract: E-waste, including devices like phones and computers, poses serious environmental risks. To mitigate these, the construction industry is exploring e-waste as a material to enhance concrete strength and durability. Hence, the present study assesses the performance of M40-grade high-strength concrete by replacing coarse aggregates with 0% to 30% e-waste plastics at various intervals. As the e-waste replacement increased, fresh concrete's workability decreased gradually. The mix containing 30% e-waste experienced the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 141–156 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Advancements in Metal-Plastic Hybrid Structures: Experimental Analysis and Design Optimization of 3D-Printed Honeycomb Frameworks
Abstract: The exploration of metal-plastic hybrid structures has gained significant attention due to their potential for lightweight, high-strength applications across industries such as aerospace, automotive, and construction. This study investigates the experimental and design enhancements of a metal-plastic hybrid structure utilizing a honeycomb architecture produced through 3D printing. By integrating metals with plastic polymers in a honeycomb configuration, this hybrid approach aims to combine the high strength and stiffness of metals …
Published in Trends in Machine design · Vol. 11, Issue 3, 2024 · pp. 36–43 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Plant-Derived Fiber-Reinforced Polymer Composites: The Impact of Compatibilizer on the Fundamental Characteristics and Degradation Properties
Abstract: By using compression molding, unidirectional polypropylene (PP) composites reinforced with banana fiber were created both with and without the use of stearic acid (SA) as a coupling agent. Four filler loading levels (10%, 20%, 30%, and 40% by weight) were employed during the composite manufacturing process, using raw banana fiber. The resulting composites underwent mechanical testing (tensile, bending, and impact characteristics). The ideal combination of mechanical properties was found in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 27–37 Read article
-
Experimental Analysis and Design Proposal of Banana Fiber Reinforced Polymer Composites and Computer Analysis
Abstract: This study presents a comprehensive experimental investigation and design model development using banana fiber reinforced polymer (BFRP) composites. The primary aim is to evaluate the mechanical and physical performance of the composite, with particular emphasis on tensile strength, flexural strength, and water absorption characteristics. These properties are critical for applications in industries such as transportation and construction, where durability, lightweight materials, and cost-effectiveness are essential. Banana fibers, being natural, renewable, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 901–907 Read article
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article
-
Solar-Responsive Photo-Thermal Polymer Composites with Carbon Nanostructures for On-Demand Water Purification
Abstract: The development of solar-responsive polymer nanocomposites offers a sustainable pathway for water purification. In this work, polyvinyl alcohol (PVA) films reinforced with graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) were fabricated and systematically investigated for their mechanical, thermal, viscoelastic, and thermal transport properties. Neat PVA displayed moderate tensile strength (~38 MPa) and high elongation (~165%), whereas 1.0 wt% nanofiller loading enhanced tensile strength to ~52 MPa and modulus to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 199–209 Read article
-
In silico Molecular Docking Analysis of Stephania glabra phytocompounds Targeting Thymidylate Kinase for potential Antituberculosis Activity
Abstract: Tuberculosis (TB) is an infectious disease caused by the bacteria Mycobacterium tuberculosis. It mainly affects the lungs and spreads through the air when a person with active TB in their lungs coughs, sneezes, or spits. This study investigates several bioactive compounds derived from plants to forecast how effective plant-based ligands will be at preventing tuberculosis. The purpose of the study was to use computational techniques to assess the effectiveness of …
Published in International Journal of Molecular Biotechnological Research · Vol. 3, Issue 2, 2025 Read article