Search
1265 articles for “and strength”
-
Investigation of Sulphate, Alkali and Carbonation Chemical attack in GGBS-Based Geopolymer Concrete and OPC Concrete
Abstract: This study presents a comparative evaluation of the durability of GGBFS-based Geopolymer Concrete (GPC) and OPC concrete in rapid carbonation, sulphate, and alkali environments. All samples were subjected to three severe conditions are carbonation at 4% CO₂, 25°C and 60% relative humidity, exposure to a 10% sodium sulphate (Na₂SO₄) solution, and immersion in a 10% sodium hydroxide (NaOH) solution for alkali resistance. The durability characteristics were evaluated by the compressive …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 13–35 Read article
-
Evaluate The Engineering Properties of Low Load-Carrying Capacity of Expansive Soil by Using Magnesium Chloride and Dry Leaf Ash Powder
Abstract: The swell-shrink behavior of expansive soils poses numerous challenges with the substructure and distress in infrastructures such as buildings, pavements, breast walls, etc. The behavior of expanding soil has been carefully examined by geotechnical engineers, who have then put adequate management techniques into place. Present investigation intends to investigate potential benefits of dry leaf ash (DLA) powder and magnesium chloride (MgCl2) to enhance geological characteristics of soil, particularly addressing problems …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 1, 2025 · pp. 33–45 Read article
-
Design and Manufacturing of Suspension and Steering System of a F3 Vehicle
Abstract: The suspension and steering systems are critical subsystems of any formula-style racing vehicle, directly influencing its stability, handling, and driver safety. This paper focuses on the design, analysis, and manufacturing of suspension and steering systems for a Formula Student F3 vehicle. The primary objective is to develop a lightweight, reliable, and efficient design that complies with Formula Student competition rulebooks while ensuring optimum ride quality and performance. Using advanced computer-aided …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–12 Read article
-
The Impact of Mindfulness Techniques on Legal Professionals: A Review
Abstract: The legal profession is known for being one of the most strained and taxing careers out there, often demanding long hours that can take a levy on mental health, leading to weariness, anxiety, and a drop in job satisfaction. Mindfulness, which involves being aware of our thoughts, feelings, physiological senses, and surroundings in the moment, has manifested as a valuable instrument to handle these difficulties. This review explores how mindfulness …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 14, Issue 3, 2024 · pp. 39–43 Read article
-
From Differential Equations to Data Science: A Survey on Analytical Methods in Contemporary Problems
Abstract: The integration of differential equations and data science methods represents a dynamic and evolving approach to solving contemporary challenges across a wide range of disciplines, including engineering, physics, biology, economics, and finance. Differential equations have long served as fundamental tools for modeling continuous systems and processes, offering powerful insights into the behavior of natural and man-made phenomena. For example, they describe how heat diffuses through materials, how populations grow in …
Published in Recent Trends in Mathematics · Vol. 2, Issue 2, 2025 · pp. 1–6 Read article
-
Critical Overview: Preparation of Bioplastics Using Different Reinforcement Fillers
Abstract: The widespread use of synthetic plastics poses a significant threat to the environment due to their nonbiodegradable nature and reliance on nonrenewable petrochemical sources. Among these, single-use plastics are of particular concern as they are difficult to recycle efficiently. To mitigate this issue, bioplastics offer a promising alternative, as they are derived from renewable sources and are biodegradable. Bioplastics are produced using natural materials, such as plant, animal, and microbial …
Published in Research & Reviews : Journal of Ecology · Vol. 14, Issue 3, 2025 · pp. 18–28 Read article
-
Effect of Process Variables on the Mechanical Characteristics of form Fabricated Materials
Abstract: Additive manufacturing prominent rapidly advancing technologies for producing 3D-printed products. Initially developed by stratasys, FDM technology emerged during the 1980s. This additive manufacturing technique builds products by extruding semi-molten material through a nozzle onto a platform. PLA and ABS are among numerous thermoplastics that are commonly used as filaments in this procedure. Purpose of research was to observe the effect of variables such as infill percentage, bed temperature, printing speed …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 3, Issue 2, 2025 · pp. 32–39 Read article
-
Effect of Welding Factors on Nugget Size of Polymer-Metal Composite Sheets Using Computational Methods
Abstract: Resistance spot welding (RSW) is a vital technique for joining materials in industries like automotive and aerospace. This study extends the application of RSW to polymer-metal composite sheets by developing 2D axisymmetric, thermo-electro-mechanical coupled model in ANSYS. The focus is on analyzing the temperature distribution, nugget formation, and parameter optimization in hybrid composite sheets, emphasizing the unique challenges posed by polymers' thermal and electrical properties. These properties differ significantly from …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 612–623 Read article
-
Enhancing IoT Network Security with Hybrid Deep Learning Classifiers for DDoS Attack Detection
Abstract: The security and operational dependability of Internet of Things (IoT) networks are seriously threatened by the growing susceptibility to Distributed Denial of Service (DDoS) assaults brought about by their rapid expansion. The intricacy and dynamic character of these advanced attacks can provide a challenge to conventional intrusion detection systems. This study presents a novel method for strengthening IoT network security by combining Convolutional Neural Networks (CNNs) and Long Short-Term Memory …
Published in Journal of Web Engineering & Technology · Vol. 13, Issue 1, 2026 · pp. 23–33 Read article
-
AI-Powered Defense: Advancing Cybersecurity Through Artificial Intelligence Innovations
Abstract: In the current landscape of escalating cyber threats and increasingly sophisticated attack vectors, integrating artificial intelligence (AI) within cybersecurity strategies has become a critical step forward. This study explores the role of AI in strengthening cybersecurity by utilizing its strengths in data analysis, pattern recognition, and predictive modeling. Through AI, organizations can greatly enhance their ability to detect and respond to threats. Machine learning algorithms enable ongoing adaptation to new …
Published in International Journal of Information Security Engineering · Vol. 4, Issue 1, 2026 · pp. 35–41 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Comparative Analysis of Tensile Properties of Virgin and Rice Husk-Reinforced PLA and ABS Filaments
Abstract: This study focuses on evaluating the tensile behavior of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments reinforced with rice husk ash (RHA) particles, in comparison with their respective virgin counterparts. The incorporation of RHA, an abundant agricultural waste by-product, was considered with the objective of developing eco-friendly composites suitable for additive manufacturing applications. Tensile testing was carried out to assess the influence of the reinforcement on the mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 224–229 Read article
-
Solar-Responsive Photo-Thermal Polymer Composites with Carbon Nanostructures for On-Demand Water Purification
Abstract: The development of solar-responsive polymer nanocomposites offers a sustainable pathway for water purification. In this work, polyvinyl alcohol (PVA) films reinforced with graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) were fabricated and systematically investigated for their mechanical, thermal, viscoelastic, and thermal transport properties. Neat PVA displayed moderate tensile strength (~38 MPa) and high elongation (~165%), whereas 1.0 wt% nanofiller loading enhanced tensile strength to ~52 MPa and modulus to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 199–209 Read article
-
Post-Treatment Methods in Additive Manufacturing: A Review of Mechanical, Thermal, Chemical, and Hybrid Approaches
Abstract: Additive manufacturing, particularly Fused Deposition Modeling (FDM), has become a cornerstone of rapid prototyping and functional part production due to its accessibility and material versatility. However, the inherent layer-by-layer nature of FDM introduces surface roughness, reduced mechanical strength, and anisotropic behavior, which limit its industrial applications. This literature review investigates the impact of chemical post-processing treatments such as solvent vapor smoothing, immersion, and hybrid chemical-thermal methods on the surface quality …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 25–34 Read article
-
Wear Behavior and Mechanical Characterization of Pure Aluminum Reinforced with RHA by Using Powder Metallurgy Method
Abstract: In recent years, composites made from aluminum and its alloys have gained significant attention due to their optimal blend of low weight, high strength, impressive toughness, enhanced thermal stability, straightforward casting processes, superior corrosion resistance, and availability compared to unreinforced aluminum and its alloys. These aluminum-based composites are widely utilized in producing components for industries such as automotive, aerospace, marine, and nuclear. Rice husk ash (RHA) is a fine, powdery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 495–502 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Experimental Analysis and Design Proposal of Banana Fiber Reinforced Polymer Composites and Computer Analysis
Abstract: This study presents a comprehensive experimental investigation and design model development using banana fiber reinforced polymer (BFRP) composites. The primary aim is to evaluate the mechanical and physical performance of the composite, with particular emphasis on tensile strength, flexural strength, and water absorption characteristics. These properties are critical for applications in industries such as transportation and construction, where durability, lightweight materials, and cost-effectiveness are essential. Banana fibers, being natural, renewable, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 901–907 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Synthesis and Characterization of Graphene-Based Hydroxyapatite Using Hydrothermal Method for Its Biomedical Application
Abstract: Developing bone implant materials that combine biological compatibility with mechanical strength remains a major challenge in orthopedic research. Hydroxyapatite (HAp) closely mimics bone mineral and supports cell growth, but its brittleness limits load-bearing applications. To address this, a quaternary nanocomposite of hydroxyapatite (HAp), graphene (Gr), zirconia (ZrO2), and ferrocene (Fc) (Hap-Gr-ZrO₂-Fc) was synthesized through a one-step hydrothermal process. Graphene and zirconia provided reinforcement, while ferrocene contributed structural stability and carbon …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 120–135 Read article