Search
530 articles for “fabrication”
-
Structural Optimization of FDM-Processed ASA Polymer Frames through Acetone Solvent Welding, Variable Infill Strategy, and Layer Orientation: Experimental Validation via Quadcopter Flight Testing
Abstract: Acrylonitrile styrene acrylate (ASA) is an amorphous terpolymer with superior UV resistance compared to acrylonitrile butadiene styrene (ABS), as its acrylate rubber phase lacks photodegradation-prone carbon–carbon double bonds. This study proposes acetone solvent welding as a polymer joining method to produce monolithic structures from FDM-processed ASA components, addressing three processing challenges: achieving structural continuity through polymer chain interdiffusion at solvent-wetted interfaces, correcting thermal warping via post-print geometric correction during welding, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 689–703 Read article
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Comparative Assessment of Polymers and Composites for Solar Panels: Fundamentals, Performance Metrics, Manufacturing, and Sustainability
Abstract: This paper presents a comprehensive review of the main types of Photo Voltaic polymers and composites such as crystalline silicon (both mono- and poly-Si), thin-film tech (CdTe, CIGS, a-Si), perovskites, and organic/dye-sensitized cells and analyses the parameters such as efficiency, fill factor, open-circuit voltage, temperature response, and degradation. The analysis focusses on polymers and composites and manufacturing techniques like vapor deposition, roll-to-roll printing, and both solution and vapor techniques for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 120–130 Read article
-
Design and Performance Evaluation of PLA-based Umbrella Wheels for Stair-Climbing Robotic Applications
Abstract: Staircase climbing robots require a complex design capable of navigating various stair configurations. A crucial component of such robots is the wheel mechanism. This paper focuses on the umbrella wheel mechanism and its application in staircase climbing robots. In this study, a PLA–based umbrella wheel structure is developed and fabricated using fused deposition modeling (FDM) for application in stair-climbing robots. The umbrella wheel geometry enables transformation from a circular rolling …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 808–824 Read article
-
An AI-Driven IoT Framework for Autonomous Quality Assurance in Optical Lens Manufacturing
Abstract: The evolution of high-precision optics—ranging from smartphone micro-lenses to high-end astronomical glass—demands unprecedented accuracy in manufacturing. Traditional inspection methods, reliant on manual sampling or static automated optical inspection (AOI), often fail to bridge the gap between high-speed production and the detection of microscopic surface aberrations. This paper introduces an integrated architecture combining the Internet of Things (IoT) and Deep Learning-based decision-making systems to revolutionize lens quality control. By deploying an …
Published in International Journal of Optical Innovations & Research · Vol. 4, Issue 1, 2026 · pp. 36–41 Read article
-
Dual Nozzle 3D Printing of Basalt Fiber–Reinforced Polymer Composites
Abstract: Additive manufacturing or 3Dprinting involves building a three-dimensional object by layering materials based on a computer-created design. Generally, 3D printing using single nozzle process where as strength, quality, wastage, and post reinforcement are drawback of this system. To eliminate and to enhance strength, precise control of fiber reinforcement, good bonding, no need of secondary reinforcement the dual nozzle 3D printing is an emerging additive manufacturing technique. In this process the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 620–630 Read article
-
Computational Modeling of Polymer Semiconductors for Electronic Applications
Abstract: Polymer semiconductors have become important materials in modern electronic applications because they combine semiconducting behavior with mechanical flexibility, low-cost processing, and tunable molecular structure. Their growing use in organic field-effect transistors, organic photovoltaics, organic light-emitting diodes, and flexible sensing devices has increased the need for accurate computational approaches that can predict material properties and device performance before experimental fabrication. This paper reviews the major computational modeling techniques used for polymer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 132–146 Read article
-
Polymers and Composites in the Design and Construction of Unmanned Aerial Vehicles: A Comprehensive Technical Review
Abstract: The emergence of Unmanned Aerial Vehicles (UAVs) over the last few years has mostly been made possible by breakthroughs in material science. This review is concerned with an overview of some of the polymers and composites that are being commonly used in drone manufacturing in recent times, especially in relation to the influence of material choice on drone performance and capability. It sheds light on the drastic change in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 874–882 Read article
-
Integrated DIPlib and OpenCV Framework for Precise Geometric Characterisation of Woven Fibre-Reinforced Polymer Composites
Abstract: The mechanical properties of woven fibre-reinforced polymer (FRP) composites stem entirely from the geometrical regularity inherent in their reinforcement structure. Changes in the size of the unit cell, fibre tow separation, weave angle, and fibre tow spacing will have an immediate effect on the stiffness and shear modulus of the material. In this paper, a combined machine vision system that incorporates both the OpenCV and DIPlib libraries is proposed for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 158–171 Read article
-
Structure–Property Correlation of Infill Topology and Density on Tensile and Flexural Performance of FDM-Printed PLA and ABS
Abstract: Additive Manufacturing (AM), particularly Fused Deposition Modeling (FDM), has become a widely adopted manufacturing technology due to its design flexibility, low cost, and capability for rapid prototyping. However, the mechanical performance of FDM-printed components is strongly influenced by internal structural parameters such as infill pattern and infill density, in addition to the intrinsic material behaviour. This study investigates the structure–property relationship between infill topology, density, and mechanical performance of PLA …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 26–37 Read article
-
A Study on Fracture Sem Analysis by Optimization of FSW When a Composite Material Al 6061 Mixed with Fly Ash is Done with Cooper Using Anova Method
Abstract: The current study aims to examine how different parameters in friction stir spot welding influence hardness and tensile strength, while identifying the most suitable parameter combinations to enhance the overall quality of the fabricated components. The experimental work involves joining dissimilar materials, where one specimen consists of Aluminum alloy 6061 reinforced with 10% fly ash, and the other is a copper alloy. Various process conditions are altered during testing to …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article
-
Mathematical Modelling and Experimental Analysis of a 3D Printed PLA UAV Propeller using NACA 4412 Airfoil
Abstract: The usage of unmanned aerial vehicles (UAVs) has grown significantly because they are cost-effective and easy to availability for many applications. However, researchers have focused on the designing for various UAV propeller/rotors geometries, including their aerodynamic performance and structural examination. An elegant, designed propeller can enhance the UAV's endurance limit and its reliability. This research focuses on designing of UAV propeller and its fabrication using Polylactic acid (PLA) material using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 825–832 Read article
-
Synergistic Effects of Hybridized Nano-Silica and Hemp Fiber Reinforcement on Bio-Epoxy Composites
Abstract: Natural fiber-reinforced bio-epoxy composites have become promising sustainable alternatives to conventional synthetic-fiber petroleum-based materials, but are often limited by low fiber-matrix interfacial bonding, low thermal stability, and high moisture absorption which limit their application in structural applications. These issues are discussed in this work, by carrying out a systematic investigation of the synergistic effects of the hybridization of nano-silica particles with alkali-treated hemp fibers in a bio-epoxy matrix the composites …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 214–228 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
An Overview on VLSI based Hardware Security in IoT Node
Abstract: In the coming era, security will not be a feature we add to an IoT device; it will be a property inherent to its transistor-level design. By encoding security into the VLSI architecture, we move away from the fragile "software-only" paradigm and toward a future where the identity of the device is as immutable as the laws of physics. The rapid proliferation of Internet of Things (IoT) devices has transformed …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 4, Issue 1, 2026 Read article
-
Growth of Cu2O on TCO by SILAR method acts as an alternative buffer electrode layer towards the development of organic solar cell
Abstract: In many types of optoelectronic devices, layer of PEDOT: PSS is sandwiched between the indium-tin oxide (ITO) electrode and the active layer. Buffer PEDOT: PSS provides a well- defined work function which is higher than that of ITO (4.2eV), it smooths the ITO surface and so avoids shorts, and it also protects the active layer from ingress of indium or oxygen, leading to longer device lifetimes. The role of PEDOT: …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 18–25 Read article
-
Advanced Solid-State Battery Technologies for Sustainable Energy Storage
Abstract: The increasing global demand for sustainable and high-performance energy storage systems has accelerated research in advanced battery technologies. Conventional lithium-ion batteries, while widely used in portable electronics, electric vehicles, and grid storage systems, face limitations such as safety risks, limited energy density, slow charging rates, and degradation over repeated cycles. To overcome these challenges, advanced solid-state battery technologies have emerged as a promising solution for next-generation energy storage applications. This …
Published in International Journal of Solid State Innovations & Research · Vol. 4, Issue 1, 2026 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Heavy Metal Removal from Textile Industrial Effluent using Banana Exocarp Derived Cellulose Acetate Graphene Nanocomposite Membranes
Abstract: The disposal of textile effluent is responsible for serious human health concerns and above all environmental concerns to all kind of species. This indicates that there is immediate and urgent need of emerging, efficient with sustainable recycling technologies. In this paper, banana exocarp as agriculture-based waste, in terms of substrate was utilised as major raw material. The extracted cellulose from the substrate with homogeneous acetylation process, transformed into cellulose acetate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 51–62 Read article
-
Semiconducting Materials for Emerging Electronics and Technological Applications
Abstract: Semiconducting materials are important for emerging electronic and photovoltaic technologies because their structural, optical and electrical properties can be tailored for specific device applications. In this study, a TiO₂-based composite photoanode is considered as a polymer-assisted semiconducting thin-film system in which inorganic TiO₂ nanoparticles are processed with organic film-forming components to produce a porous layer for dye-sensitised solar cell application. Nanocrystalline TiO₂ nanoparticles were synthesised from titanium isopropoxide using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 36–50 Read article