Search
1981 articles for “P Controller” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Chlorine Leakage from Control Valve in Charging Station Pipeline: A Case Study
Abstract: This paper describes accidental release of chlorine gas from control valve through a chlorine charging system in a green color pigment manufacturing chemical industry. The chlorine gas dispersed over the entire reactor floor and nearby area at night time shift work. This paper presents root cause analysis of the incident. Corrective and preventive measures are also discussed. Finally, conclusions reached with recommendations are drawn for industrial facilities for handling and …
Published in Journal of Industrial Safety Engineering · Vol. 1, Issue 2, 2014 · pp. 1–6 Read article
-
Automatic Surface Defect Detection for Ceramic Tiles Using Digital Image Processing: A Literature Review
Abstract: The term quality is the most important factor in many industries. Whole business and the brand name are dependent upon the quality of produced goods. Defect detection is generally done manually while manufacturing may be fully automatic. Therefore, our aim is to enhance quality control by integrating various image-processing techniques, before dispatching of the final product to make no rejection rate. An automated system is expensive at the installation but …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 2, 2018 · pp. 1–6 Read article
-
Closed Loop Control of Multi Level Inverter Tied with 415 V AC Source Using SV-PWM for Renewable Energy
Abstract: In this work, 415 V AC source is interfaced with three-level diode clamped inverter in which renewable energy source is used as a DC source, solar energy is used which is most popular renewable energy source. The obtained DC from the solar irradiation is fed to MPPT (Maximum Power Point Tracking) to utilize voltage at maximum power (DC). The perturb and observe technique is used in this work to track …
Published in Journal of Power Electronics and Power Systems · Vol. 6, Issue 1, 2016 · pp. 55–65 Read article
-
Design and Application of a Lead Compensator to a Guided Missile Control System
Abstract: Phase lead compensation is an important and reliable method for classical control design in the frequency domain for continuous time systems. This study is concerned with the design of a lead compensator using Bode plot for a laser guided missile to satisfy the required performance specifications. Simulation studies are carried out in MATLAB which shows that the compensated system meets the desired specifications.Keywords: Bode plot, missile control system, phase lead …
Published in Journal of Control & Instrumentation · Vol. 11, Issue 2, 2020 · pp. 23–33 Read article
-
A Future Revolution in Medical/Dental Therapeutics: Medical Marijuana
Abstract: Dispensing and use of marijuana (Cannabis) and derivatives are restricted under federal statutory control in the United States as “SCHEDULE 1” substances (illegal drugs). However, at the state level (September 2016), “medical marijuana” is legal in 20 states plus “recreational marijuana” in four states and the districts of Columbia. Several other states have litigation for marijuana decriminalization on the November 2016 ballot. Pharmacotherapeutic use of marijuana and its derivatives may …
Published in Research and Reviews: A Journal of Dentistry · Vol. 7, Issue 3, 2016 · pp. 1–6 Read article
-
Optimizing Parameters for Dry Sliding Wear Control in Stir-Cast AA7050/SiC Composites
Abstract: Using a pin-on-disc tribometer, this study examined the dry sliding wear behavior of AA7050/SiC composites. The production of this metal matrix composite was achieved through the stir-casting process, which involved an initial step of melting the AA7050 alloy, followed by the careful introduction of silicon carbide (SiC) particles, stirring to achieve uniform dispersion, and finally, casting the molten mixture. Wear rate (WR) was determined by three operational parameters: SiC reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1624–1635 Read article
-
Deploying Fuzzy Logic for Self-Tuning Regulator Design for Motion Control in Modern Electrical Machines
Abstract: Modern electrical machines require sophisticated motion control systems capable of adapting to varying operating conditions, load disturbances, and parameter uncertainties. Traditional self-tuning regulators (STR) based on classical control theory often struggle with nonlinearities, time-varying dynamics, and complex operational environments characteristic of contemporary electric drives. This article presents a comprehensive framework for deploying fuzzy logic in self-tuning regulator design to address these challenges in motion control applications. Fuzzy logic controllers leverage …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 3, Issue 2, 2025 · pp. 11–21 Read article
-
Advanced Energy Metering and Automated Control System
Abstract: In this paper need for energy efficiency especially combining smart metering with control of load and prepaid billing becomes insistent. An ESP32-based Advanced Energy Metering and Automated Load Control System, is presented in this paper taking advantage of an IoT-capable smart meters, real-time data analytics, motion detector-based automation scheduling, Real-time clock (RTC) module-enabled scheduling, and GSM based prepaid billing notifications. The central controller, responsible for real-time energy monitoring, automated load …
Published in Journal of Control & Instrumentation · Vol. 17, Issue 2, 2026 · pp. 8–15 Read article
-
Design of an Automatic Device Controller Based on Temperature Sensing by Using Verilog HDL Targeting an FPGA
Abstract: To get a single controller that is capable to produce some control signal depending on sensing temperature is getting popularities for industrial and home applications. In this paper uses an LM34 Precision Fahrenheit Temperature Sensor IC and an ADC0820 8-Bit, high-speed, µP-compatible flash A/D converter IC in order to design and implement the mentioned controller onto a SPARTANTM-II Field Programmable Gate Array (FPGA) by using DigilentTM Pegasus SPARTAN-II FPGA Board, …
Published in Journal of Control & Instrumentation · Vol. 3, Issue 1-3, 2012 · pp. 6–16 Read article
-
A Novel Improved Model of Three-phase Shunt Active Power Filter using Adaptive Tabu Search and Genetic Algorithm in Aircraft Power Utility of 400 Hz
Abstract: A new improved model of aircraft shunt filter has been proposed in this paper. The shunt active power filter model has been improved using Adaptive Tabu Search Algorithm and Genetic Algorithm. ATS algorithm has been used to obtain the optimum value of parameters of the PI controller; whereas Genetic Algorithm has been used to find the optimum value of filter inductor used in active filter. The new improved model of …
Published in Journal of Power Electronics and Power Systems · Vol. 3, Issue 3, 2013 · pp. 6–14 Read article
-
Influence of Flow Control Devices on Aerodynamic Characteristics of Wind Turbine Blades: A Comprehensive Review
Abstract: The growth of the wind energy sector has increased the need for enhanced techniques with the goal of improving the efficiency and reliability of wind turbines. As the size of wind turbines increases, there is a noticeable increase in energy loss, problems with fluctuating loads, and structural damage. This suggests that effective techniques need to be implemented in order to improve their efficacy. Methods for flow control, including passive and …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 2, 2026 · pp. 52–88 Read article
-
Standardization of Calcium-based Unani Formulation: Kushta Kharmohra
Abstract: AbstractKushta Kharmohra is a herbo-mineral formulation used since ancient times in traditional system of medicine as well as folklore for the treatment of various ailments. At present, there is very little selective information available about its quality-control parameters. It is crucial to scientifically evaluate kushta kharmohra for delineation of their place in health care so as to validate the criteria for its worldwide usage. In the present work, an attempt …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 2, Issue 2, 2013 · pp. 52–57 Read article
-
Green Gesture Control Tractor
Abstract: India being the agricultural country a clean technology for farming can increase the prosperity of farmer and prosperity of the nation at large. Prototype of Green Gesture Control Tractor is designed and developed specially for the farmers. The main objective was plowing, planting, sprinkling of pesticide, harvesting the crop and transportation of crop with least efforts. In Green Gesture Control Tractor, human hand motions are sensed by sensor (ADXL345 accelerometer) …
Published in Current Trends in Information Technology · Vol. 10, Issue 2, 2020 · pp. 12–17 Read article
-
Applications of Wireless Sensor Network
Abstract: Wireless sensor networks (WSNs) have grown in popularity in recent years and have a wide range of applications, including health, the environment, and the military. Despite its impressive capabilities, the creation of WSN remains a difficult endeavor. Several programming approaches that focus on lowlevel system concerns have been offered in current real-world WSN installations. WSNs are a type of network made up of interconnected sensor nodes that communicate wirelessly in …
Published in Journal of Mechatronics and Automation · Vol. 8, Issue 3, 2021 · pp. 44–49 Read article
-
Evolution of Kinematic and Dynamic Design in Robotic Mechanisms: A Systematic Overview
Abstract: The field of robotics has experienced significant advancements in both kinematic and dynamic design, driven by the growing need for precision, adaptability, and autonomy in mechanical systems. Early robotic mechanisms were predominantly rigid and operated based on simple serial architectures, offering limited degrees of freedom and relying heavily on analytical formulations for motion planning and control. Over time, the demand for greater dexterity and operational versatility led to the development …
Published in Trends in Machine design · Vol. 12, Issue 2, 2025 · pp. 38–43 Read article
-
Trustable Digital Design Counter-Measures against Eavesdropping and Man-in-the-Middle Attacks in Qi Wireless Power Transfer Protocol
Abstract: Qi is a wireless power transfer protocol by which power can be transferred from a wireless power transmitter to a wireless power receiver. The power receiver controls the power that will be transmitted from the power transmitter by sending several forms of control packets to power transmitter as necessary. But under the current specifications of the protocol, there is no authentication mechanism by which a power transmitter can recognize whether …
Published in Trends in Electrical Engineering · Vol. 6, Issue 2, 2016 · pp. 26–40 Read article
-
Understanding Food Spoilage: Mechanisms, Shelf-Life Determination, and Safety Standards
Abstract: Food spoilage poses significant challenges to the global food industry, impacting both food safety and economic sustainability. The main causes of food quality deterioration are microbial and non-microbial spoiling. Microbial spoilage primarily results from the activity of bacteria, yeasts, and molds, which thrive under favorable environmental conditions. These microorganisms can lead to food poisoning and spoilage through the production of off-flavors, discoloration, slime formation, and the accumulation of harmful toxins. …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 14, Issue 1, 2025 · pp. 6–9 Read article
-
Glutathione: Postoperative Study in Breast Carcinoma
Abstract: Breast cancer represents a significant problem in the world. Glutathione a tripeptide is found in all mammalian tissues. Thus any change in its synthesis or utilization can profoundly influence the redox status of cells. In this study blood sample was collected from 60 FNAC confirmed breast cancer patients (preoperative and postoperative three months) and 30 normal healthy controls for the estimation of glutathione. There was significant increase in glutathione in …
Published in Research and Reviews: Journal of Oncology and Hematology · Vol. 7, Issue 1, 2018 · pp. 3–6 Read article
-
Recent Trends in Fluid Mechanics with Emphasis on Aeroacoustics and Flow-Induced Noise Control
Abstract: Fluid mechanics continues to evolve rapidly due to increasing demands in aerospace, automotive, energy, and environmental engineering applications. Recent trends in this field highlight significant advancements in both theoretical understanding and practical implementations, particularly in complex flow phenomena. Among these, aeroacoustics and flow-induced noise control have emerged as critical research areas due to their direct impact on system performance, efficiency, and environmental sustainability. Aeroacoustics deals with the generation, propagation, and …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 1, 2026 · pp. 32–38 Read article
-
A Survey on Congestion Control in Wireless Network Using Different Protocols
Abstract: AbstractThis paper presents a complete summary of work on congestion control in wireless network within the layers of the wireless network protocol. This paper is about the wireless network and the congestion in wireless network, describe the routing protocols such as proactive and reactive protocols (DSDV, DSR and AODV). Explain queue management and types of queue management such as Active Queue Management (AQM) and Passive Queue Management (PQM) and their …
Published in Trends in Opto-electro & Optical Communication · Vol. 5, Issue 2, 2015 · pp. 6–11 Read article