Search
1265 articles for “and strength”
-
The Study of Gravimetric Thermal Analysis and Some Physical Properties of a Binary Polymeric Mixture of Unsaturated Ester and Peach Seed Powder
Abstract: Strengthening polyester resin and increasing its hardening was studied by adding peach seed powder. We also studied how to change the thermal properties after strengthening the resin by adding different weight percentages of peach seed powder (5%, 10%, 15%). The thermal properties of polyesters were studied before and after cementing, which included thermogravimetric analysis (TGA) and treatment at different temperatures (21, 51, 81, 121, 151ºC.) The effect of acidic functions …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 33–46 Read article
-
Functionally Graded Natural Fibre and SiC-reinforced Polymer Composite: Mechanical Properties
Abstract: Multifunctional materials, also called functionally graded materials (FGMs), are based on natural fibres or fillers and vary in composition and/or microstructure to control functional, structural, or thermal, properties. Functionally graded materials (FGMs) have been created for use in spacecraft, aircraft, and other engineering applications because they can withstand extremely high temperatures. Particle-reinforced FGMs, which make up the majority of FGMs, are made differently depending on their position. The mechanical and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 1–14 Read article
-
Investigating the Functionality of Graphene Fiber Reinforced Plastic (GFRP) Laminates
Abstract: The increased adaptability and usefulness of glass-fiber reinforced polymer has led to its widespread adoption. GFRP laminates can be improved by including filler materials to improve their already impressive set of qualities. The demand for the research and development of advanced composites with enhanced properties has never been greater, and this is especially true for composites that are lightweight but have enhanced tensile and flexural qualities. An example of a …
Published in Journal of Polymer & Composites · Vol. 11, Issue 6, 2023 · pp. 1–9 Read article
-
Topology Optimization of Press Tools for Additive Manufacturing: Reducing Manufacturing Time
Abstract: This research paper presents a topology optimization study of a press tool consisting of a punch and a die, with the aim of optimizing the press tool topology to reduce material usage, and manufacturing time while maintaining necessary strength. The tools will be manufactured using additive manufacturing technology with Polylactic Acid (PLA) material. The Additive Manufacturing method can be used to make prototypes of press tools in the development stages. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 40–56 Read article
-
Quantifying Damage Evolution in Fiber-reinforced Composites Using Fracture Mechanics
Abstract: By evaluating the evolution of damage, such as cracks or delamination, within the material over time or under various loading situations, damage evolution in fiber-reinforced composites can be characterized using fracture mechanics. Fracture mechanics offers a framework for understanding and projecting the behavior of materials that already have damage or flaws. Since they have a high strength-to-weight ratio and unique mechanical qualities, fiber-reinforced composites are essential in many branches of …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 26–32 Read article
-
Study on a Supercritical Airfoil with Variation in Thickness for Improved Aerodynamic Characteristics in Transonic Regime
Abstract: In this research the steady state analysis of a supercritical airfoil is done to understand the flow physics at transonic Mach number regime for various thickness. The modeling of NASA SC (2) 0714 supercritical airfoil with various thickness values is done. The steady state analysis is carried out for different test cases in combination with different thickness, angle of attack and Mach number at 10 km altitude using density-based Reynolds …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 122–134 Read article
-
An overview of dissimilar metals welding by cold metal transfer technique
Abstract: Cold Metal Transfer (CMT) welding has emerged as a promising technique for joining dissimilar materials, offering enhanced weld quality and mechanical properties. This review article explores the application of CMT welding in joining different metal alloys, focusing on two significant cases: magnesium-aluminium and aluminium-stainless steel combinations. CMT welding minimizes intermetallic compound formation and produces high-strength joints in magnesium-aluminium combinations. CMT welding with a friction-surfaced aluminum coating offers strong metallurgical bonding …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 167–174 Read article
-
Exploring Nutool (Irrigation) as A Treatment Method in Ilaj Bit Tad-Beer (Regimenal Therapy)
Abstract: The Unani system of medicine employs four primary modes of treatment: Illaj bil ghiza (dietotherapy), Illaj bil Dawa (pharmacotherapy), Illaj bit tadbeer (Regimenal therapy), and Illaj bil yad (surgery). Illaj bit Tadbeer encompasses a range of regimenal interventions, including Hijamah (cupping), Irsal alaq (leeching), Fasd (venesection), Dalak (massage), Nutool (irrigation), Qay (Emesis), Idrar-i-Bawl (Diuresis), Tariq (Diaphoresis), Munzij and Mu'shil therapy (Concoction and purgation), Bukhoor (medicated steam), kayy (cauterization), Huqna (enema), …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 11, Issue 1, 2024 · pp. 1–6 Read article
-
Enhancements in Titanium Matrix Composites: A Multifaceted Exploration of Various Structural Ceramics Reinforcement
Abstract: This research study delves into the comprehensive exploration of Titanium Matrix Composites (TMCs) reinforced with Silicon Carbide (SiC), Alumina (Al2O3), and Boron Nitride (BN). The investigation is structured into three key phases, each addressing essential aspects of TMCs: Phase 1 involves materials and manufacturing, where TMC coupons were fabricated through the stir casting technique with varying compositions of aluminum and silicon carbide. Phase 2 focuses on characterization and defect detection, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 83–94 Read article
-
Dynamic deformation and microstructural characteristics of AA5083 under the influence of electrochemical behaviour using equal channel angular pressing
Abstract: Large-scale Equal channel angular pressing is a great engineering material that has more potential for AA5083 industrial applications. Uniaxial dynamic compressive tests across a temperature of 448 K were conducted for the ECAP technique AA5083 in order to create such a design framework. The microstructure was described using transmission electron microscopy and scanning electron microscope both before and after dynamic loading. The plastic flow behaviour of the AA5083 was described …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 95–112 Read article
-
Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration
Abstract: Chloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as marine and industrial exposure conditions, where the damage can be particularly severe. This study provides an experimental investigation utilizing three distinct water-binder ratios (0.3, 0.4, and 0.5) applied to three types of concrete mixtures: conventional concrete, concrete blended with 40% fly ash, and concrete blended with 40% fly ash and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 202–213 Read article
-
Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration
Abstract: The reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. Therefore, extensive research is being conducted to estimate the time taken for threshold chloride ions to reach the reinforcement and break the protective layer, initiating the corrosive process. This study conducted an experimental investigation on controlled concrete, concrete incorporating 50% GGBS, and concrete incorporating both 50% GGBS and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 214–226 Read article
-
Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints
Abstract: In this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at the weld joints' characteristics, especially their mechanical aspects. In the experiment, here were multiple tool rotating rates (rpm) of 800, 1000, 1200, 1400, and 1600 used. A cylindrical pin-equipped tool featuring a tapered profile was utilized, inserted into the AA6061 alloy plate is offset by 0.5 mm, while maintaining …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 161–168 Read article
-
Evaluation of microstructure properties and characterization of fracture locus of AA5083 through equal channel angular pressing techniques
Abstract: In this investigation, a commercially available aluminium alloy called AA5083 was subjected to two passes of equal channel angular pressing utilising a route B_C at room temperature for this experiment. To evaluate the effect of AA5083, the microstructure, mechanical attributes, and wear parameters of the alloy were examined both prior to and subsequent to undergoing this technique. Using an optical microscope, microstructural investigations were performed on the pressed alloy's flow …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 270–286 Read article
-
Secure Coding Practices for Enhancing the Art of Ethical Hacking: A Comprehensive Study
Abstract: In the quickly developing scene of network safety, secure coding, and moral hacking are essential for strengthening computerized environments. Secure coding systems and moral hacking are linked to digital strength. This study examines the relationship between secure coding and moral hacking, emphasizing the importance of a hierarchical culture that focuses on secure coding standards. Attention to detail in software development can protect against malicious exploits. Security considerations are integrated throughout …
Published in International Journal of Wireless Security and Networks · Vol. 2, Issue 1, 2024 · pp. 21–29 Read article
-
Investigation of microstructure and mechanical properties of multi-pass friction stir processing on precipitation hardened aluminum alloy
Abstract: In the present study, multi-pass friction stir processing of aluminum AA2014-T651 alloy is per-formed with one and four passes. The multi-pass processing is performed at a tool rotational speed of 1000 rpm with a traverse speed of 63 mm/min. Microstructural characterization of fric-tion stir processed specimens indicated a significant grain refinement with equiaxed grains in the four pass specimen. Microhardness and tensile strength of the multi-pass specimen decreases with the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 339–349 Read article
-
Fabrication and Evaluation of Aluminum Hybrid Metal Matrix Composite via Powder Metallurgy Approach
Abstract: The growing demand for lightweight materials in modern automotive industries has spurred the development of Aluminum-based metal matrix composites (AMMC). Utilizing the powder metal-lurgy method for fabrication offers a cost-effective alternative to other methods. Composites of Al6061 with varying compositions of 6–18 wt% SiC (8 microns) and 6–18 wt% B4C (10 mi-crons) were prepared to assess their physical and mechanical properties. Scanning Electron Mi-croscope analysis revealed uniform dispersion of SiC …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 205–211 Read article
-
Dynamic Performance Enhancement of Polymer Composites through Metaheuristic machinining optimization
Abstract: This work aims to provide an optimization of meta-heuristic algorithms in order to improve the dynamic behavior of composite materials utilized in various practical engineering tasks. Based on the Comprehensive literature review it has been observed that composite sandwich panels with PVC foam cores accomplished mechanical characteristics superior than those ones that were produced on PU foam core mainly in flexural, compression, and impact tests Thus the study establishes the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 114–129 Read article
-
Feedback Based Three Finger Robotic Gripper
Abstract: This research presents the development and validation of a novel three-finger robotic gripper system enhanced with force feedback capabilities. Leveraging Force-Sensing Resistor (FSR) sensors and servo actuators, the gripper is engineered to dynamically adjust its grasp based on real-time force feedback. Through a series of iterative design iterations and experimental validation, the gripper demonstrates robustness and adaptability in various gripping scenarios. The integration of force feedback allows the gripper to …
Published in Journal of Mechatronics and Automation · Vol. 11, Issue 1, 2024 · pp. 11–17 Read article
-
Evaluation of composite material based on different phases of Face recognition System
Abstract: Composite materials can indeed play a crucial role in various phases of a face recognition system, offering advantages such as lightweight construction, durability, and tailored mechanical properties. Let's explore how composite materials can be utilized in different phases of a face recognition system. A composite material based different phases of Face recognitions System is software that recognizes or verifies a person based on a digital image or a frame from …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 195–204 Read article