Search
530 articles for “fabrication”
-
Dielectric Polymer Based Tunable Bandpass Filter for RF MEMS Applications
Abstract: In this paper, we report on the design, modeling, and analysis of a tunable bandpass filter implemented in a coplanar waveguide (CPW) configuration, where a distributed MEMS transmission line (DMTL) is integrated with dielectric polymer layers to achieve dynamic frequency and bandwidth reconfigurability. The proposed filter architecture leverages the tunable dielectric response of polymer films, enabling precise control of the center frequency and passband width under applied electrostatic bias. Comprehensive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1449–1470 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Experimental Investigation of Water Absorption and Mechanical Behavior of Bamboo Fiber Based Polymer Composites
Abstract: The objective of this research is to assess the suitability of bamboo fibers as a sustainable alternative to synthetic and wood fibers for reinforcing polymer composites. Plant-based fibers, particularly bamboo, offer advantages such as biodegradability, lightweight nature, abundance, and impressive mechanical properties that rival or surpass those of conventional materials. In this study, special focus is placed on the extraction of long fibers from Dendrocalamus giganteus, using a combined mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1471–1481 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Recycling of Waste Cloths for Greener Future
Abstract: The exponential development of fashion and textile industries around the world largely increase, the production of waste cloth has grown by a steep rate, presenting serious environmental issues in terms of landfill garbage, greenhouse gas emissions and waste depletion. Millions of tons of textiles are disposed of every year, and the recycling of waste cloth has become one of the critical solutions to a circular economy in the process of …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 4, Issue 1, 2026 · pp. 1–13 Read article
-
Assessment of Hygiene Degradation and Expiry Indicators in Household Bedding Products
Abstract: Household bedding products such as pillows, bedsheets, blankets, and mattresses play a crucial role in ensuring comfort, sleep quality, and overall health. However, prolonged use without timely replacement or proper maintenance can result in hygiene degradation, leading to the accumulation of dust, allergens, microorganisms, and chemical wear. This study aims to assess the factors contributing to hygiene decline and to identify reliable indicators of expiry for common bedding items. The …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 4, Issue 1, 2026 · pp. 33–47 Read article
-
Synthesis of Graphene-CeO2 Nanocomposite with Enhanced Electrochemical Properties
Abstract: For the fabrication of graphene–cerium oxide (CeO₂G) composites, 99 mg of cerium oxide (CeO₂, 99.9%) was uniformly dispersed in 100 mL of deionized water via ultra-sonication (40 kHz) to achieve a stable suspension, followed by the incorporation of 1 mg of synthesized graphene. The resulting mixture was maintained at ambient temperature (25 ± 2 °C) under continuous magnetic stirring at 500 rpm for 2 h to promote effective interfacial interaction …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1355–1373 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Ferroelectric Materials for Next-Generation Non-Volatile Memory Applications
Abstract: The continuous scaling of conventional memory technologies is increasingly constrained by limitations in power consumption, speed, endurance, and integration density. As data-intensive applications such as artificial intelligence, Internet of Things, and edge computing demand fast and energy-efficient memory solutions, alternative non-volatile memory technologies have gained significant attention. Ferroelectric materials, characterized by their reversible spontaneous polarization, offer a promising pathway toward next-generation non-volatile memory due to their intrinsic non-volatility, low operating …
Published in Journal of Microelectronics and Solid State Devices · Vol. 13, Issue 1, 2026 · pp. 1–9 Read article
-
Optimization of Process Parameter in 3D Printing to Minimize Wear Loss and increase Tensile Strength
Abstract: Additive Manufacturing (AM) and especially Fused Deposition Modeling (FDM) has emerged as a very versatile process of manufacturing polymer components with complex and highly-integrated geometries. Polylactic Acid (PLA) is a favorite of the many thermoplastic FDM materials because of its biodegradability, easy processing and predictable mechanical properties. The study aimed at maximizing critical parameters in FDM process in order to reduce wear loss and also increase tensile strength of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 849–858 Read article
-
Experimental Analysis and Predictive Modeling of Mechanical Behavior in Epoxy Composites Reinforced with Waste Tyre Rubber Particles
Abstract: The disposal of end-of-life tyres poses a significant environmental and resource challenge owing to their large volumes and non-biodegradable nature. In this work, we explore the incorporation of waste tyre rubber particles (WTRP) into an epoxy resin matrix to develop sustainable polymer composites and examine their mechanical behavior both experimentally and through predictive modelling. Composites with differing epoxy: WTRP ratios (80:20, 75:25, 70:30 wt.%) and varying rubber particle mesh sizes …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1754–1765 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Experimental Investigation of Boron Carbide Reinforced Al-Mg-Si Alloy Nano Composites by the Stir Casting Method Using Machine Learning Algorithm
Abstract: For the purpose of this experiment, Al-Mg-Si alloys were manufactured with the use of the stir casting process with a metal mold. The alloys had different weight percentages of nano boron carbide, which ranged from 0 to 4% by weight. The intervals between the percentages were 0.5. Following that, the microstructural and mechanical parameters of the as-cast alloy and the nano composites were compared and contrasted according to ASTM Standards …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1766–1779 Read article
-
A Review on Loading Methodologies of Active Aromatic Substance into Biopolymers
Abstract: Biopolymer-based films are increasingly being studied as sustainable alternatives to conventional packaging materials due to their biodegradability, renewability, and potential for functionalization. There are several natural polymers in the category of biopolymers such as soy protein, zein, cellulose, chitosan, and several other biodegradable synthetic polymers such as polylactic acid and polycaprolactone. However, these often show limitations in barrier properties, mechanical strength, and resistance to microbial contamination. To overcome these drawbacks, …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 9–13 Read article
-
A Technical Survey on Nanotechnology in Nanorobots
Abstract: Nanotechnology, the manipulation of matter at the atomic and molecular scale, has given rise to a revolutionary frontier: nanorobots – microscopic machines capable of interacting with biological systems and environments with unprecedented precision. This study explores the design, functionality, and application of nanorobots in medicine, environmental remediation, and materials science. By integrating principles from materials engineering, biotechnology, and robotics, nanorobots are engineered to perform tasks such as targeted drug delivery, …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 14–21 Read article
-
Polymer Matrix Characterization and Interfacial Engineering in Bamboo/Sisal/Chopped Mat Hybrid Fiber Composites
Abstract: The present investigation focuses on the characterization of polymer matrices and the interfacial behavior of bamboo, sisal, and chopped strand mat (CSM) fiber-reinforced epoxy composites. The work aims to understand how natural fibers influence the curing, thermal, and adhesion properties of hybrid composite systems. Experimental analyses were carried out using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) to evaluate curing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 123–135 Read article
-
Implement Explainable Machine Learning to Improve Conductivity in Polymer-CNT Nanocomposites: Supporting Adaptive, Flexible, and Long-Lasting IoT Wrap-Around Electronics Applications
Abstract: The rapid growth of Internet of Things (IoT) technologies requires electronic components that are adaptable, lightweight, and durable, and that can continue to function well in diverse contexts and circumstances. Polymer–carbon nanotube (CNT) nanocomposites have become interesting choices for these kinds of uses because they are more flexible, conduct electricity better, and can be made to fit specific needs. However, improving conductivity in these heterogeneous systems remains a major challenge …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 238–254 Read article
-
Influence of SlS Parameters on Strength and Fatigue Durability of Polyamide-12
Abstract: Selective Laser Sintering (SLS), a laser-based polymer powder bed fusion process, has gained prominence in the fabrication of high-performance thermoplastics such as Polyamide-12 (PA12). This paper provides an extensive review of how key SLS process parameters—such as laser power, scan speed, hatch spacing, and energy density—affect the mechanical properties of PA12 components, with a specific focus on tensile strength and fatigue resistance. Studies demonstrate that increasing energy input enhances particle …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 178–191 Read article
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Machinability and Reliability Analysis of Al6063–Al2O3 Metal Matrix Composites Using Image-Based Flank Wear Evaluation
Abstract: This study explores the machinability and reliability characteristics of Al6063–Al2O3 metal matrix composites (MMCs) as analogues for polymer–metal hybrid composite systems, focusing on their potential use in lightweight structural and metal matrix composite-integrated applications. The composite specimens were fabricated through stir casting with 3% and 9% Al2O3 reinforcements, followed by mechanical characterization that confirmed significant enhancements in hardness and strength compared to unreinforced Al6063. Machining experiments were performed using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 264–290 Read article