Search
1500 articles for “Mechanical Properties”
-
A Study on the Sintering Behavior of Al2O3/Y2O3 Doped ZrO2 Composites
Abstract: AbstractZirconia ceramics are widely used as cutting tools due to their very high hardness, excellent fracture toughness, flexural strength, and wear-resistance properties. Tetragonal zirconia exhibits better mechanical properties due to the transformation toughening of zirconia. The superior mechanical properties in zirconia are mainly due to higher density and controlled microstructure. In the present work, an attempt has been made to prepare near full-dense zirconia bodies with controlled microstructure by optimizing …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 1–8 Read article
-
Predictive Modeling of Polymer Elasticity and Mechanical Strength Using Deep Learning for Functional Polymer Material Characterization and Performance Assessment
Abstract: Knowing the polymers elasticity and mechanical strength is essential in the characterization of functional polymer materials, for rapid characterization and to avoid extensive experiments. Traditional polymer characterization methods are often time consuming and resource intensive and the mechanical response of polymers can be nonlinear, thus complicating the prediction of the properties. These limitations can be overcome by introducing a Variational Temporal Fusion Transformer (VaTFT) for the deep learning prediction of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Preparation and Properties of Blends of Thermoplastic Polymer with Thermoplastic Starch
Abstract: Problems in making biodegradable plastics are incompatible between hydrophilic/polar and hydrophobic/non-polar ingredients. Ingredients like compatibilizers were added to improve the compatibility between the two ingredients. The purpose of this study was to determine the effect of thermoplastic potato starch (TPS) content and two compatibilizers (maleic anhydride, MA, and dibutyl maleate, DM) on melt flow behavior, mechanical features (tensile, bending, and Izod impact test), phase morphology, thermal behaviors (DSC, and TGA/DTG), …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 1, 2022 · pp. 16–29 Read article
-
Mechanism of Microwave: Material Interaction and Its Effect on Material Properties
Abstract: Application of microwave energy for materials processing is emerging as a novel and innovative technology with many advantages over conventional processing, such as reduction in processing time resulting into energy and cost savings, providing finer microstructures, leading to improved mechanical properties and eco-friendliness etc. Microwaves are electromagnetic waves with wavelengths ranging from 1 m to 1 mm, which correspond to frequencies between 0.3 and 300 GHz. Microwave heating is a …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 18, Issue 2, 2016 · pp. 11–14 Read article
-
Investigation into mechanical Characterstics of laminated composite materials (PMMA and NYLON) using FDM
Abstract: The widespread embrace of 3D printing technology stems from its capacity to minimize material waste, offer versatile design options, and enable the production of intricate structures. 3D printed polymer composites reinforced with fibers (carbon, glass, nylon etc.) have been extensively used in automobile, marine, aerospace and energetic applications due to their excellent properties. Nylon fiber is light weight, resistance to damage from oil and chemicals, tough, strong and has higher …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 108–121 Read article
-
Experimental Study on Properties of Concrete with Phoenix Fibres
Abstract: In this paper, an attempt has been made to investigate the possibility of using phoenix fibre to improve the properties of concrete. The aim of this research is to investigate the properties of concrete with phoenix fibres of various percentages. Mechanical properties such as compressive strength, split tensile strength of concrete using phoenix fibre have been investigated. M20 grade of concrete has been used for this investigation. Mechanical strength tests …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 40–45 Read article
-
Effect of Hot Induction Process on Bend Properties
Abstract: This paper discusses about the effect of processing speed and water flow rate on the mechanical properties of the hot induction bending of grade API5LX70 for the bending angle of 30o with the bending radius of 3D. Water flow rate & speed of the bending machine were varied to optimize the process parameters with respect to mechanical properties.
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 97–104 Read article
-
Review on Severe Plastic Deformation Techniques for Bulk Materials: Deformation Behavior and Properties
Abstract: This paper presents a detailed review of the efficient application of Severe Plastic Deformation for the fabrication of ultra-fine-grained and nanostructured crystalline bulk materials. Severe Plastic Deformation allows substantial grain refinement while largely preserving the original dimensions of the workpiece, making it especially suitable for ductile materials capable of sustaining very high strains under elevated hydrostatic pressure prior to failure. The study investigates the grain refinement mechanisms involved in Severe …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 40–72 Read article
-
Carbon Nanotubes: A Potential Reinforcement Material for Composites
Abstract: AbstractSince their invention almost 10 years ago by Iijima, carbon nanotubes have been the concentration of significant research. Various researchers have since then have reported surprising physical and mechanical properties for this new type of carbon. Having exceptional mechanical properties including strength, modulus, stiffness which exceeds all current materials, carbon nanotubes offer tremendous opportunities for the development of fundamentally new nanotubes reinforced metal matrix or metal ceramics composite materials for …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 2, 2017 · pp. 42–49 Read article
-
Development and Comparative Study of Aluminium- Copper Metal Based Composite Through Different Routes
Abstract: The aim of this study is to develop aluminium-copper composite through powder metallurgy technique. Powder metallurgy is an art or technology which can produce exact dimension of final roducts utilizing less energy. Copper oxide (CuO) was used as the source of copper, which was extracted through a reduction process using dextrose. The reaction was thoroughly examined and reported. Commercially available aluminium powder served as source of the aluminium. Aluminium- copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 19–32 Read article
-
Effects of Weight Fractions on Properties of Aluminium-Fly Ash Metal Matrix Composites
Abstract: With particles of fly ash as the particulate addition, the properties of pure Al can be greatly improved. The incorporation of fly ash brings significant changes in some of its core properties like hardness, density, stiffness, strength, wear resistance. A comparison of the mechanical properties of pure Al have been done with three sets of Al-fly ash composites containing 6, 8 and 10% by weight fly ash which are manufactured …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 44–48 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Formulation, Development and Evaluation of Oral Thin Film of Metoclopramide Hydrochloride
Abstract: Metoclopramide Hydrochloride, an anti-emetic drug is indicated for the patients with diabetic gastroparesis and Gastro Esophageal Reflux Disease (GERD). It is difficult for a patient to swallow a tablet during emesis. So, an attempt was made to develop a patient-friendly orally dissolving film using clove oil and menthol as flavoring agents, aspartame as sweetener, polyvinyl alcohol and glycerol as film forming agent and plasticizer respectively. Based on appearance and palatability …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 2, Issue 2, 2011 · pp. 22–27 Read article
-
Fabrication and Surface Modified Non-woven Calotropis gigantea Fiber Mat Reinforced Polypropylene Composites by Film Stacking Method
Abstract: Nowadays, there is a growing environmental consciousness and awareness about the need for sustainable development, which has led to growing interest in using natural fibers as reinforcement in polymer composites for synthetic fiber substitution. The current work deals with the effects of Calotropis gigantea fiber (CGF) content and chemical modification of CGF mats by treatment with sodium dodecyl sulfate (SDS) and SDS-pretreated benzoyl chloride on the fundamental properties of CGF-filled …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 10–22 Read article
-
Parametric Study of Fiber-Reinforced Concrete with Partial Cement Substitution Using Fly Ash and Rice Husk Ash
Abstract: This research aims to evaluate the impact of incorporating steel fibers [SF] and partially substituting cement with rice husk ash [RHA] and fly ash [FA] on the properties of concrete. SF were added in different volume fractions [0%, 0.25%, 0.5%, 0.75%, and 1.0%], combined with 10% RHA and 20% FA. Initially, the concrete mix contained 30% FA with no RHA, which was then adjusted to a mix of 15% FA …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 171–180 Read article
-
Preparation of Cassava Starch-based Trays with Glycerol, Sorbitol and Poly (Vinyl Alcohol): Properties and Influence for Use as Food Packaging
Abstract: Biodegradable foam trays based on cassava starch were produced by a thermal expansion process, with the additives (glycerol, sorbitol and poly (vinyl alcohol) (PVA)) in different concentrations (2.5, 5.0 and 7.5% (w/w) of starch weight). The influence of the additives in their microstructure, physical and mechanical properties was evaluated. The tray thickness ranged from 1.81 to 2.00 mm and density ranged from 0.20 to 0.35 g/cm3. Then, additives mainly influenced …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 4, Issue 3, 2015 · pp. 45–52 Read article
-
Enhancement of Flexural Strength in FDM-Printed Components through Taguchi-Based Process Parameter Optimization
Abstract: Additive manufacturing (AM), especially Fused Deposition Modeling (FDM), has emerged as a widely adopted and versatile method for producing three-dimensional components. The process involves the deposition of a thermoplastic filament in a semi-molten state, which solidifies in successive layers to form the final structure. While this method enables the production of complex geometries at relatively low cost, the printed parts often exhibit inferior surface quality and reduced mechanical performance compared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 272–280 Read article
-
Influence of the Modification of Resol Phenolics on the Properties of Glass and Cotton Fiber Laminates
Abstract: Fiber reinforced polymer (FRP) composite based on resol phenolics awaits special attention due to excellent inherent properties of the resol phenolics. In this study, modified resol phenolics by unsaturated polyester (UP) and epoxidised novolacs of simple phenol, o-cresol and p-cresol were used to fabricate glass and cotton FRPs. An overall enhancement of 25% in tensile strength and 40% in impact strength is achieved upon modification for both the modified laminates. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 239–255 Read article
-
Advancements in Material Design and Motion Control: Integrating Additive Manufacturing, Fused Deposition Modeling, and Precision Systems in Modern Applications
Abstract: The interaction between material design, mechanical properties, and advanced motion control systems is vital in a range of engineering domains, including robotics, electronics, and manufacturing. This article examines two key areas: the mechanical properties and design of cutting-edge materials, focusing on composites, polymers, ceramics, and fibers, and the integration of advanced motion control systems in hand-held electronic and photographic devices. The first section delves into the mechanical behavior of various …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 2, 2024 · pp. 26–30 Read article
-
A Review of the Effects of Filler Rod on Bimetallic Weld Joint
Abstract: FSW (Friction Stir Welding) is a technology for joining solid-state metals. Welding metal does not melt and recast. Tunnel defects, kissing bonds, cracks, pin holes, and pipping defects are some of the most common in FSW. The defects occur as a result of poor metal mixing and insufficient heat input in the weld nugget zone. Only a small body of literature has focused on filler material and process parameters for …
Published in Trends in Machine design · Vol. 9, Issue 1, 2022 · pp. 33–39 Read article