Search
1979 articles for “1.25Cr-0.5Mo.” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Determination of Heavy Metals in Soil Samples in the Vicinity of Liquid Natural Gas Project, Shabwah Governorate, Yemen
Abstract: The present work aimed to determine the contaminants in soils resulting from or deposited due to emissions that come from natural gas in the area of Balhaf which is an LNG project in Republic of Yemen. Total of 8 surface soil samples were collected at depth of approximately (0–10 cm) from two sites which has different distances from the natural gas liquefaction project, took 4 samples from first site. The …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 67–76 Read article
-
Modeling of Patient of Type 1 Diabetes for Blood Glucose Control
Abstract: The recent development in the insulin delivery system is the automatic one. The blood glucose levels are controlled by the feedback loop. The initial success with the simple models in normalizing blood glucose level led to the improvement of the devices including variety of control system. The insulin delivery system to diabetic is a tedious job and doesn’t ensure proper performance and leads to various complications if the delivery of …
Published in Journal of Microelectronics and Solid State Devices · Vol. 3, Issue 1, 2016 · pp. 30–35 Read article
-
Impact of various Fibers on the Mechanical and Durability Performance of Fibre-Reinforced Concrete with SBR latex
Abstract: Recent years included a proliferation of research efforts focused on fibre reinforced concrete (FRC), an innovation that perceives extensive application in the construction industry. FRC's enhanced mechanical properties ahead of conventional concrete have broadened its significance recently. Natural fibers have been produced in response to expanding environmental deterioration in recent years, and research is currently continuing with the goal of utilizing them in the construction field. This study explores the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 26–40 Read article
-
Investigation of the Effects of Solpawa SBR-X TM Doses on Total Petroleum Hydrocarbon in Loam Soil at Different Depths
Abstract: Laboratory trials of environmental remediation products bring the hope of inventing such products to reality for many of today’s intractable environmental pollution conditions, paving the way for the field trials and subsequent large-scale field application. This laboratory study was conducted as the first phase of a 2-tiered adaptive trials of Solpawa® Bioremediation System (Solpawa-SBX) funded by the Nigerian Content Development and Monitoring Board (NCDMB). The study investigated the effectiveness of …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 64–72 Read article
-
Compressive and Tensile Behavior of Lime Added Geopolymer Concrete.
Abstract: Concrete is the most used material, which required large quantities of Ordinary Portland Cement (OPC). OPC production is held responsible for some of the CO2 emissions, which polluted the atmosphere. Hence, it is inevitable to find an alternative material to OPC. Geopolymer concrete is a best alternative which shall be produced by the chemical action of inorganic molecules. This paper focuses fly-ash based Geopolymer concrete with addition of lime. In …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 1–11 Read article
-
Use of waste paper sludge and polypropylene to study the performance of concrete
Abstract: A large quantity of waste paper is generated from the offices and industries of the paper mill and it needs to be disposed off through proper waste management system or effectively reutilized in construction industry. Hypo plant in the paper industry generates large volume of waste in the form of slurry, disposal of which causes environmental problems. The increasing amount of waste is a concerning reality that arose various sustainability …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 11–20 Read article
-
Combined Effect of Welding Speed and Tool Pin Profiles on Tensile properties of FSWAA6061-T6 Joint
Abstract: Friction stir welding is a solid state welding process for joining two similar and dissimilar materials, in which non-consumable tool with rotary motion along with transverse motion with intimate contact to weld coupon generates sound joint. In this study, tool rotation speed, tool travel speed and tool pin profile are taken to know their effect on mechanical properties of AA6061-T6. The main objective for this research is to evaluate the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 1, 2017 · pp. 24–31 Read article
-
Design of High-Speed TIQ Comparator for Flash-Type ADC for (WPMOS/LPMOS) > 1
Abstract: Comparator is the circuit that compares an analog signal with the reference signal and produces the binary output based on comparison. A Comparator is the main block in the ADC design as it directly affects the conversion rate of an ADC. Depending on the type and architecture of the comparator, the comparator can have significant impact on the performance of the target application. The speed and resolution of an ADC …
Published in Journal of VLSI Design Tools and Technology · Vol. 4, Issue 2, 2014 · pp. 47–52 Read article
-
Modeling of Voltage Buffer and Memristor Voltage Buffer Using 180 nm Technology
Abstract: Objective of this paper is the analysis of voltage buffer and is referred to as a common drain amplifier or that can be considered as a source follower also. It compares the result of simple voltage buffer that results with the memristor inbuilt in the same schematic circuit of voltage buffer. Memristor is considered as a fourth existing component after the resistor, capacitor and an inductor proposed by Dr. L.O. …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 1, 2016 · pp. 62–72 Read article
-
Time Domain Analysis in an On-chip High Speed RLCG Interconnection Network at 0.18 µm Technology
Abstract: In this model, the time domain waveform is evaluated for calculation of delay time, peak time, settling time, damping ratio and natural frequency for a second order RLCG interconnect network. It can also be used for multiple interconnect systems but for higher order systems it is ignored due to accurate analysis. The model is applied to a single resistance-inductance-capacitance-conductance model which can also be extended to multi-interconnect systems to analyze …
Published in Journal of VLSI Design Tools and Technology · Vol. 1, Issue 1-2-3, 2011 · pp. 57–67 Read article
-
Modeling and Simulation to Monitor Dissolved Nitrogen Depositions in Eleme Streams, River State
Abstract: This paper monitor the dissolved nitrogen deposition in stream, the study observed high rate of nitrogen content in the stream, the result from physiochemical analysis shows the rate and variation of nitrogen concentration, this pollution content were monitored applying modeling and simulation, the predictive values were generated from different stations, the result shows decreasing rate of dissolved nitrogen from all the stations, the results expresses in every points of observation …
Published in Journal of Water Resource Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 23–37 Read article
-
Flood Frequency Analysis of Big Akaki River, Awash Basin, Ethiopia
Abstract: Flood is one of the most dangerous naturally occurring catastrophic hazards now days displacing and killing people and destroying properties. During high flow, the Big Akaki River flooded the vicinity of the area and causes loss of cultivated land and life. Flood water inundates the floodplain areas and cause vast damages to life and property. The main objective of this paper is to analyze the inundation area along the Big …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 2, 2021 · pp. 35–48 Read article
-
Rainfall-runoff Modeling using HEC-HMS Hydrologic Model for Guder River Watershed, Blue Nile Basin, Ethiopia
Abstract: Rainfall-runoff modeling is important for a number of hydrologic applications including flood forecasting, water resource planning and management. This study presents the result of a watershed rainfall-runoff modeling for Guder river watershed having area of 6597 km 2 using Hydrologic Engineering Center-Hydrologic Modeling Systems (HEC-HMS). The watershed runoff is varying spatially and temporally due to manmade factors and natural factors on the watershed. These issue needs efficient water resource planning …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 2, 2021 · pp. 62–77 Read article
-
Durability and Non Destructive Test of Hybrid Fibre Reinforced Concrete
Abstract: AbstractAim: This paper presents the strength and performances of steel fibre reinforced concrete (SFRC) and hybrid fibre reinforced concrete (HFRC). The hybrid fibre is considered in the combination of hooked end steel fibres and polypropylenes fibres. Method: To study the durability properties, the fibre content dosage V f ranged from 0.5 to 2.0% of steel fibres, and 0.8SF0.3PP, 0.7SF0.3PP, 0.6SF0.4PP, 0.5SF0.5PP of hybrid fibres. 10 mixes including one control mix …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 31–45 Read article
-
Study on High Rise (G+32) Cluster Shaped Building Under Earthquake with the help of IS 1893, UBC-97 and ASCE 7-10 codal provisions
Abstract: Modern high-rises, in low seismicity areas, are designed to withstand lateral loads.While high rise buildings would suffer structural damage, the shaking produced by the earthquake is a long period of slow shaking.The stability and stiffness of any structure is the major issue of concern in any high-rise buildings.This research is related to comparison of high rise G+32 cluster shape building under Seismic area with the help of different country codes …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 24–33 Read article
-
Prediction of Mix Ratios for Grade 30 Superplasticized Concrete Using Osadebe’s Regression Model
Abstract: This study developed a model for estimating the compressive strength of grade 30 super-plasticized concrete. The regression model was built using a total of 15 experimental mix ratios. The results of compressive strength at 28 days from the concrete cubes were used for model development. Two cubes (150 mm × 150 mm × 150 mm) were produced per mix ratio, totaling 30 cubes for the 15 trial mix ratios. Osadebe’s …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 1–10 Read article
-
Bluetooth-Based Remote-Controlled Home Automation System for 1 Load
Abstract: The evolution of wireless technology has catalyzed the integration of wireless based automation into various aspects of human life, notably impacting home environments. Home automation, characterized by the incorporation of technology facilitating the automatic control of devices and systems, has emerged as a significant contributor to modern living standards. This technological paradigm shift not only enhances the convenience and comfort of everyday life for the general populace but also serves …
Published in Recent Trends in Electronics Communication Systems · Vol. 10, Issue 2, 2023 · pp. 43–48 Read article
-
TITLE - COMPUTATIONAL TECHNIQUES FOR SOLVING 1D FIELD PROBLEMS. i.e. (structural problems)
Abstract: Numerical methods in field of applied mathematics and applied physics are well known tools for solution of various disciplinary and interdisciplinary field problems with different boundary conditions such as solid mechanics, heat transfer, fluid mechanics and soil mechanics etc. This paper aims for successfully framework to get feasible one-dimensional solutions of field problems (i.e. solid mechanics) with finite difference method, finite element method and their comparison with analytical (exact) solutions. …
Published in Trends in Mechanical Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 32–38 Read article
-
Evolution Of Cellular Technology- 1G To 4G And Beyond
Abstract: This paper deals with the advancements in the wireless communication technologies and its evolution over the recent dynamic times. Cellular technologies have undergone a transition from a restricted local communication in the early stages to extremely fast global communication enabler. The First Generation provided basic voice communication limited within a particular region at relatively low speed. The Second Generation underwent a transformation with respect to speed, network security and inclusion …
Published in Journal of Communication Engineering & Systems · Vol. 8, Issue 1, 2018 · pp. 43–51 Read article
-
PAPR Reduction using Selective Mapping Method for OFDM Communication Systems
Abstract: AbstractSelective mapping method (SLM) is one of the most important techniques used for peak-to-average power ratio (PAPR) reduction of orthogonal frequency division multiplexing (OFDM) communication system. It is simple in implementation, gives distortionless transmission and reduces PAPR significantly. Mathematical modelling and Matlab simulation have been carried out to analyse its performances. At of CCDF, PAPR values for OFDM signal without applying any reduction technique is 11.5, 11.8, 12.1, 12.4 and …
Published in Journal of Communication Engineering & Systems · Vol. 5, Issue 3, 2015 · pp. 50–57 Read article