Search
1972 articles for “investigations” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Experimental Investigation of Effect of Soil Structure Interaction on Buildings
Abstract: In the conventional analysis and design, buildings are generally considered to be fixed at their bases, but in actual practice, the support condition depends on the type of soil on which it is founded. The flexibility of the soil medium allows the movement of soil and foundation, which decreases in the overall stiffness of building frames and results in a subsequent increase in natural periods of the system. Thus, the …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 32–45 Read article
-
Experimental Investigation on Ferrocement Slab Using Steel Fibres and Different Sands
Abstract: Ferrocement is defined as wire mesh reinforcement impregnated with mortar to produce elements of small thickness. An experimental study has been carried out to study the effect of different compositions of cement mortar using 10% fly ash and different percentage of 6–8% silica fumes with two types of sands such as Badarpur sand and river sand and show the effect of load versus deflection curve and flexural strength of ferrocement …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 27–30 Read article
-
Experimental Investigations of Prestressed Hollow Core Slabs and Grouted Hollow Core Slabs
Abstract: With the advent and rapid inclusion of prefabricated concrete system to the construction industry, it poses interesting research challenges to the academic world. The acceptance of hollow-core slab as an alternative to the normal reinforced concrete solid slabs is getting delayed due to the delusion among public. The usage of grouted hollow core slabs by filling the core with grout is one of the increasing demands observed by the hollow …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 16–21 Read article
-
Experimental Investigation of Self-Compacting Concrete Using Coir Fiber
Abstract: Concrete is the construction material widely used throughout the world. Construction materials used in the industry should be friendly with the environment during their usage. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It is able to flow under its own weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. The hardened concrete is dense, homogenous …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 6–12 Read article
-
Experimental Investigation of SCC Using Glass Fiber
Abstract: An attempt is made to study the effect of glass fiber impregnation in self-compacting concrete; glass fiber which may aggregate together is added as reinforcing agent. Glass fiber was added in concrete 0.25, 0.5 and 1% by weight of cement. The fine aggregate is replaced with manufactured sand (M sand) in various percentages. Glass fiber added increased the compressive strength to considerable value and also it is found that the …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 25–31 Read article
-
Investigation on Clay Soil Stabilization using Plastic Powder
Abstract: A huge amount of black cotton soil or clayey soil is available all around the world which leads to a waste of land for construction uses, since it has expansiveness, swelling and shrinkage properties etc. So we have tried to resolve this problem by stabilizing the black cotton soil by waste material marble powder. This study impact with the effect of PP (PP) on expansive soil by conducting the laboratory …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 2, 2017 · pp. 18–21 Read article
-
Preliminary Investigation on Steel Slag: Production, Processing and Cementitious Properties
Abstract: Steel slag is glass-like by-product left over from the conversion of iron to steel in a basic oxygen furnace, or from the melting of scrap to make steel in an electric arc furnace. This paper reviews the production, processing, and cementitious properties of steel slag, and its use as a cementing component in different cementing systems. The chemical composition of raw ore and cooling of molten steel slag have a …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 17–22 Read article
-
Experimental Investigation for Strengthening the Nanocomposite Cementitious Materials with a Nanoscale Modification
Abstract: For the last few decades, researchers have widely used nanopolymer to control the mechanical properties of cementitious materials as a micro reinforcement. This paper examines and compares the mechanical and microstructure property of nanofiber cementitious material. Twenty-four sets of beam/cube cast with carbon nanofibers (CNFs) cementitious material where CNFs were used from 0.1%, 0.2%, and 0.3% of cement weight. The nanoparticles were scattered using a surfactant and an ultrasonic probe …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 10–24 Read article
-
Exploring the Influence of Rice Husk Ash on Compressive Strength: Experimental Investigations in Construction Materials
Abstract: This paper aims to know the effect of rice husk ash on compressive strength 6 molds were collected and laboratory tests were conducted in cooperation with private laboratories in Baghdad Governorate, Iraq. The tests were conducted for a period of 7 and 28 days, where the samples were divided into 1 control and 5 samples distributed on a different percentage from 5% to 25% of the rice husks. The compressive …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 24–28 Read article
-
Experimental Investigation of EAFS Aggregate Concrete by Partially Replacing Cement with Single Blended SCMs Fly Ash, GGBS and UGGBS for Sustainable Concrete
Abstract: This study represents research work on the effect of electric arc furnace slag (EAFS) aggregate containing concrete with the utilization of different secondary cementitious materials (SCMs) in single blending, which is the extension of our previous work to optimize EAFS aggregate in concrete. We found 50% EAFS aggregate replacement performance comparatively better as compared to natural aggregate. A total of 12 concrete mixes were cast in different single blended SCMs …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 28–35 Read article
-
Experimental Investigation of Double Pipe Heat Exchanger to Improve Thermal Performance, By Using Cerium Oxide (CeO2) Nanofluid
Abstract: Heat exchanger is a device which is very important in every modern industry. Cerium Oxide is used as a nanofluid in this research paper which is made by mixing Cerium Oxide (CeO2) and water. The thermal performance analysis of double pipe heat exchanger is performed by changing the composition of Cerium Oxide nanofluid . At different flow rates (7, 8, 9 litres/min) of nanofluid, flow volume concentration (2%, 3%, 4%) …
Published in Recent Trends in Fluid Mechanics · Vol. 8, Issue 3, 2021 · pp. 24–31 Read article
-
Investigation of DC link Capacitor Failures in DFIG based Wind Energy Conversion System
Abstract: This paper presents the effects of DC link electrolytic capacitor failure of DFIG based wind energy conversionsystem (WECS). The degradation of electrolytic capacitor can lead to the failure of DC link. As DFIG basedWECS utilize low power converter, so there is a need to explore the effects of capacitor failure. This failure(short circuit of capacitor or open circuit) leads to the power outages, high machine currents, high transientcurrents in rotor …
Published in Trends in Electrical Engineering · Vol. 1, Issue 1-2-3, 2011 · pp. 13–22 Read article
-
Investigation of the Control Parameters in the Machining of Inconel 718 with a carbide tool using Taguchi methodology
Abstract: The main objective of proposed work is to determine the influence of controllable parameters on machining characteristics of Inconel-718 and to achieve the optimum parameters for efficient milling. The Taguchi methodology is adopted for the design of experiments and process optimization. The paper gives an understanding of the different controllable cutting parameters such as cutting velocity, feed rate and depth of cut. It discusses about the carbide tool being used …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 73–76 Read article
-
Experimental Investigation of Overall Heat Transfer Coefficientin Drop wise Condensation
Abstract: The experiments are performed to study the heat transfer characteristics over a drop wise condensation. The phenomenon of drop wise condensation is in which the condensate forms into drops rather than covering the entire cooling surface with a continuous film. In drop wise condensation, heat transfer coefficient produced is 2 to 10 times greater than those produced by film wise condensation. Hence drop wise condensation is desirable as it is …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 17–21 Read article
-
Investigate the effect of TIG welding process parameters on weld distortion of AA6061 - A Technical review
Abstract: TIG welding, also known as Gas Tungsten Arc Welding, is a process that uses heat orpressure to join metal pieces. The electrodes and weld pools are covered with inert gas. Toachieve high-quality weld connections, superior alloys such as stainless steel, aluminium, andmagnesium alloys must be employed. The aluminium metal was invented and produced in 1825.This project uses the 6061 aluminium alloy, which is one of nine different varieties of aluminium …
Published in Trends in Mechanical Engineering & Technology · Vol. 12, Issue 1, 2022 · pp. 31–38 Read article
-
Simulative Investigation of RoF and FSO Based Hybrid Network with Different Types of Fibers
Abstract: Free-Space Optics (FSO) is a communication network in which free space work as a channel between transceivers and uses line-of-sight technology and it uses a laser to deliver optical bandwidth association. At present, the FSO system is able for transmission of data, audio and video messages through the environment, permission for optic connectivity not having need of fiber optic cable or protecting spectrum licenses. FSO network can operate over distances …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 2, 2019 · pp. 1–8 Read article
-
Investigating Effect of Geometrical Parameters on Negative Poisson’s Ratio of S-shaped Auxetic Structure
Abstract: Auxetic material is developed to trim down weight and upsurge strength of the matter, whichleads to negative Poisson’s ratio. Current research is focused on auxetic strength, hence in thiswork parametric influence of S-shaped unit cell on Poisson’s ratio is explored and results arecompared with finite element analysis. Parameters like Angle, Thickness and Aspect ratio arecompared and concluded that they have individual significance on Poisson’s ratio. TheS-shaped auxetic structure is analysed …
Published in Trends in Opto-electro & Optical Communication · Vol. 10, Issue 3, 2020 · pp. 5–11 Read article
-
Design and Performance Investigation of Silicon-on- Insulator Based Optical Waveguide Biosensor
Abstract: Optical biosensors using silicon on insulator (SOI) prove itself a reliable option to get a real-time and cost-effective breast cancer detection technique. In this article, we discuss the need for and importance of a cancer detection technique that leads to accurate results without posing any harm to patients’ lives. We present a design of an optical biosensor using R-Soft CAD software simulated in the finite difference time domain (FDTD). Applications …
Published in Trends in Opto-electro & Optical Communication · Vol. 13, Issue 2, 2023 · pp. 16–25 Read article
-
Investigation the Incorporating of SBS and HDPE in Rutting of Two Asphalt Concrete Layers
Abstract: Rutting in flexible pavement is one of the main permanent deformations which appears in most Iraqi roads owing to high temperature and the increase in axial excessive heavy trucks load, these combined conditions cause a major impact on the road performance. The polymers are used as additives to improve the properties of asphalt and, that leads to achieve high quality asphalt mixture. This humble research focuses on finding the suitable …
Published in Trends in Transport Engineering and Applications · Vol. 4, Issue 1, 2017 · pp. 1–10 Read article
-
Experimental Investigation on Two Lift Cement Concrete Pavement
Abstract: Rigid pavement construction is promoting now a days due to its durablilitycriteria.Cost of fresh aggregate is 30-35% more than recycled aggregate which causes increase of overall cost of pavementthustwo lift pavement has great potential as a sustainable paving solution.The main objective of this study is to use recycled aggregate in concrete pavement which reduced overall cost of the pavement.Sincenatural aggregate scarcity is increasing day by day.Generally homogenous layer of concrete …
Published in Trends in Transport Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 1–7 Read article