Search
522 articles for “tensile property”
-
Experimental Investigation on Concrete with Partial Replacement of Cement by Fly Ash
Abstract: Fly ash is increasingly used as a supplementary cementitious material to partially replace cement in concrete. This paper presents an experimental investigation on the strength properties of concrete with varying percentages of fly ash replacement, from 0% to 25% by weight. The fresh, hardened, and durability properties of high performance concrete with fly ash percentages of 5%, 10%, 15%, 20% and 25% were studied. The test results indicate that 20% …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 1–14 Read article
-
Combine Effect of Metakaolin, Recycled Steel Fiber and Waste Glass Powder on Mechanical Properties of Concrete
Abstract: This study investigates the combined effects of metakaolin, recycled steel fiber, and waste glass powder on the mechanical properties of concrete. Specifically, the research explores concrete mixes with metakaolin, crushed glass powder at 9%, 12%, 15%, and 18%, and recycled steel fiber at 0.5%, 1%, 1.5%, and 2% as partial replacements for cement. The primary aim is to identify the optimal mix proportions that enhance the compressive strength, flexural strength, …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 7–17 Read article
-
Latex Modified Concrete for Development of Sustainable Architecture
Abstract: To improve the performance of concrete, latex polymer and fly ash are mixed with concrete. This paper presents the effects of using additive material styrene-butadiene rubber (SBR) Latex and Admixture Fly Ash as a partial replacement to cement in mortar mixes. In this research comparison between with or without the replacement of fly ash and polymer is studied for Compressive strength, split tensile strength, flexural strength and ultrasonic pulse velocity …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 39–49 Read article
-
Effect of Surface Modification on Properties of Kevlar/Epoxy Polymer Composites
Abstract: In this study, a high-performance Kevlar/epoxy polymer composite was prepared using a hand lay-up technique. The Kevlar fiber was treated with calcium chloride/ethanol solution (CaCl2/EtOH) to enhance the interfacial interaction between the fiber and the epoxy matrix. The optimization of fiber surface treatment and fiber content for the best tensile strength (TS) of Kevlar/epoxy polymer composite was achieved using Box-Behnken design (BBD) through response surface methodology (RSM). Three parameters: CaCl2 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 35–46 Read article
-
Investigation and Concerns on the Mechanics Behind Grain Refinement During ECAP Operation with Applications to Polymers
Abstract: Materials science and engineering have studied Equal Channel Angular Pressing (ECAP) grain refining. This abstract discusses important findings and concerns about grain refining mechanics during ECAP.A adaptable severe plastic deformation method; ECAP refines grain patterns in many metallic materials. Many researches have attempted to understand this phenomenon's complex mechanisms. Microhardness and microstructure (morphology) of AL alloy increase with the increase in pass numbers. It is observed that the mechanical property …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 1–11 Read article
-
Analysis of Effect of Human Hair in Compressive and Split Tensile Strength of Concrete
Abstract: AbstractThis research paper presents the analysis of the effect of human hair in compressive and split tensile strength of concrete. In the recent time due to a significant increase in population increases large amount of human hairs. Human hairs are strong in tension and it also reduces greater impact, abrasions and shatter resistances in concrete and prevents many problems in this environment. Fiber reinforcement improves the impact strength and fatigue …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 9, Issue 2, 2018 · pp. 50–61 Read article
-
A Study of Nacl Alkali Treated Muntingia calabura fibre Reinforced Composites
Abstract: Natural fibre reinforced composites are more commonly used in various applications due to their biodegradability, low cost, available in nature and less harmful to the environment than synthetic fibres. In the present study, NaCl alkali treated MuntingiaCalaburafibres(MCF) reinforced composites are developed using hand layup technique and evaluated the mechanical properties of the composites. The increase of the NaCl content (up to 20 percent) and the fibre weight is maintained constant …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 500–507 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Comparative Analysis of 3D Printed Nylon and PETG Specimens for Mechanical Properties.
Abstract: Fused deposition modeling (FDM) is one of the most used additive manufacturing techniques for polymer components. The polymer materials generally used in FDM process are polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), polyethylene terephthalate glycol (PETG), Nylon, etc. The mechanical properties of parts fabricated by FDM depend on material and process parameters. Several researchers have tried to investigate the influence of process parameters on mechanical properties for some of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 7–14 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article
-
STUDY OF THE RHEOLOGICAL, PHYSICAL-MECHANICAL PROPERTIES OF DISPOSED POLYPROPYLENE AND POLYVINYL CHLORIDE BINARY MIXTURES
Abstract: In this study, various compositions were prepared by modifying the decommissioned polypropylene (PP)-based polymer waste with polyvinyl chloride (PVC) in different proportions for the purpose of modification, and the flow index and physical and mechanical properties of their alloys were studied. As a result of the research, the following results were obtained. PP/PVC binary compositions were prepared and samples were obtained based on 6 different proportions by changing the amount …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 Read article
-
Recyclable Vitrimer-Matrix Carbon-Fiber Composites for Aerostructures: Reprocessing Efficiency and Retention of Mechanical Performance
Abstract: To begin with, carbon fiber reinforced polymers (CFRP) have become an important part of the structural loading in many modern aircraft; however, due to their permanent cross-linking in thermosets, they cannot easily be restored after being retired. Vitrimers have been proposed as a solution since their Covalent Adaptable Networks (CANs), rearranged by associative exchange, may be reshaped, welded, repaired or dissolved without damaging the CFRP fibers. This paper reviews whether …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 95–112 Read article
-
Substantial Enrichment of Mechanical, Thermal and Electrical Properties of Thermoplastic Polyester Elastomer by Melt Blending with Nano-ZnO
Abstract: Polymers are more reinforced with nano-metal oxides, a completely flexible composite of engineering that simplifies the way of exhibiting good mechanical and chemical features. Polymer mixtures represent a very vital field in the handling of innovative ingredients, which have better features than net polymers. Polymer mixtures can deliver ingredients with prolonged useful features beyond the range that can be achieved from a single polymer equivalent. A methodical study was performed …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 1, 2022 · pp. 12–22 Read article
-
A Review on Metal Inert Gas Welding of Dissimilar Steels
Abstract: Joining of dissimilar metals has found its use extensively in power generation, electronic, nuclear reactors, petrochemical and chemical industries due to environmental concerns, energy saving, high performance, cost saving and so on. However efficient welding of dissimilar metals has posed a major challenge due to difference in thermal, mechanical and chemical properties of the materials to be joined under a common welding condition. This causes a steep gradient of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 1, 2020 · pp. 1–15 Read article
-
Comparative Analysis of Different Mechanical Properties of Banana Pseudostem Fiber and Pineapple Leaf Fiber Reinforced Polymer Composite
Abstract: In this research, a hybrid natural fiber polymer composite is prepared using different combinations of banana pseudostem fiber and pineapple leaf fiber in a discontinuous reinforcement phase and epoxy polymer in a continuous matrix phase. For the preparation of the composite, the hand layup technique is used and important mechanical characteristics, namely tensile, flexural, and impact strength, are determined. The findings of this investigation represent that the highest values of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1248–1256 Read article
-
Development of Environmentally Friendly Concrete by Incorporating Rubber and Leather Waste
Abstract: The valorization of post-consumer polymeric waste into high-performance composite materials offers a sustainable strategy for advancing circular economy principles and reducing environmental impacts.This study investigates the feasibility of utilizing recycled crumb rubber from end-of-life tires and leather-derived polymeric waste from the footwear industry as sustainable fillers in polymer-modified cementitious composites. Crumb rubber and processed leather waste were incorporated as partial replacements for natural fine aggregate at replacement levels of 0%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 547–563 Read article
-
Comparative analysis of carbon fibre and E-glass fibre characteristics
Abstract: In the contemporary automotive industry, the imperative focus on energy efficiency has driven the central role of lightweight, addressing challenges such as emissions reduction and fuel efficiency. Extensive research is underway to develop lightweight materials enhance recyclability, integration feasibility, and overall fuel efficiency These experiments were conducted in agreement with ASTM D638, ASTM D790-03, and ASTM D790 standards to ensure adherence to industry standards and facilitate meaningful comparisons. For the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 253–267 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Hybrid Polymer Composites Reinforced with Coconut Shell Fillers and Silica Fume: Synergistic Effects of Industrial By-Products: A Comprehensive Review
Abstract: The increasing requirement of sustainable and high-performance engineering materials has led to increased research in hybrid polymer composites comprising sustainable fillers in the form of renewable biomass or industrial by-products. Among the various bio-fillers that exist, coconut shell filler is gaining much prominence due to its low density, high content of lignin, hardness, and abundance as agricultural waste. Another industrial by-product that is rich in amorphous silica and possesses high …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1296–1307 Read article