Search
928 articles for “Temperament”
-
Optimization of Process Parameter in 3D Printing to Minimize Wear Loss and increase Tensile Strength
Abstract: Additive Manufacturing (AM) and especially Fused Deposition Modeling (FDM) has emerged as a very versatile process of manufacturing polymer components with complex and highly-integrated geometries. Polylactic Acid (PLA) is a favorite of the many thermoplastic FDM materials because of its biodegradability, easy processing and predictable mechanical properties. The study aimed at maximizing critical parameters in FDM process in order to reduce wear loss and also increase tensile strength of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 849–858 Read article
-
A Review on Effect of Cryogenic Treatment on Wear Resistant Bearing Materials for Automotive Application
Abstract: Cryogenic processing has come as a successful supplementary process to common heat treatment, especially in improving the wear-resistant performance of materials employed in in-vehicle applications. This sub-zero processing is normally performed following quenching and before tempering, during which materials are subjected to extremely low temperatures, typically around -196°C, for prolonged periods of 24 hours. Cryogenic treatment, which involves subjecting materials to extremely low temperatures, has demonstrated promising results in changing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Biopolymer–Cement Hybrid Panels from Recycled Paper Mill Reject: Experimental Characterisation and Machine Learning Optimization
Abstract: The increased rate of the accumulation of industrial residues in the developing countries is a major cause of concern for the environment. The current study brings forth the use of industrial residues in the form of the production of eco-friendly building materials as a sustainable approach to their valorization. The valorization of recycled paper mill reject, a cellulose-based biopolymeric industrial residue, is being addressed in this study as a reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 67–90 Read article
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Compatative Catalytic Study of Oxidation of Thiourea by Chromium (VI) in Presence of Different Catalysts and Micelles
Abstract: The series of catalysts like acetate, oxalate, EDTA, the varies micelles viz, CTAB, SDS, TRITON X-100 was carried out in the kinetic study of oxidation of Thiourea by Cr(VI) as an oxidant in water medium. The effect of catalytic efficiency has been study for varies catalyst and micelles by volumetric method and UV spectroscopic methods. The product was confirmed by IR studies. UV study reveals shows that higher catalytic efficiency …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 9–21 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
Bioscouring And Anionization of Waste Cotton Fabric for Efficient Removal of Malachite Green Dye
Abstract: Adsorption is an efficient method for dye removal but the high cost of adsorbents limits its use, emphasizing the need for sustainable, low-cost alternatives. This study explores the usage of modified cotton fabric for the treatment of malachite green (cationic dye) from wastewater. Cellulase extracted from Raphanus sativus and Daucus carota were evaluated for bioscouring potential which was confirmed by scanning electron microscopy. Further, cotton fabric was chemically modified using …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 53–68 Read article
-
Review on Severe Plastic Deformation Techniques for Bulk Materials: Deformation Behavior and Properties
Abstract: This paper presents a detailed review of the efficient application of Severe Plastic Deformation for the fabrication of ultra-fine-grained and nanostructured crystalline bulk materials. Severe Plastic Deformation allows substantial grain refinement while largely preserving the original dimensions of the workpiece, making it especially suitable for ductile materials capable of sustaining very high strains under elevated hydrostatic pressure prior to failure. The study investigates the grain refinement mechanisms involved in Severe …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 40–72 Read article
-
Polymer Composite-Enhanced Anaerobic Digestion of Kitchen Waste for Optimised Biogas Production: Process Design, Parametric Study, and Simulation Analysis
Abstract: There is an urgent need for decentralised sustainable biogas production from organic waste due to the rising amount of food waste in cities. The application of polymer composite material including HDPE tanks, PVC pipes, and FRP secondary containment systems presents a promising option compared to conventional MS digester fabrication in terms of durability, excellent thermal insulation capability, light weight, and easier installation. This study explores the possibility of adopting a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 803–818 Read article
-
Determination of Compatibility of Polymer Systems and Study of Chemical Properties of their Mixtures
Abstract: We have obtained mechanical strength of materials as a result not by synthesizing new polymers, but by using industrial polymers. We have developed a technology for obtaining new composite materials based on industrial multi-tonnage polymers of high-strength polyethylene (HSPE), polyvinyl chloride (PVC), polyurethane thermoplastic elastomer (DUTEP), butyl rubber (BR), chlorocarboxylate polyethylene (CCPE), ethylene propylene rubber (EPR). To obtain a composition from these polymers, their mixture compatibility was first determined using …
Published in International Journal of Cheminformatics · Vol. 4, Issue 1, 2026 · pp. 17–29 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Experimental and Process Optimization Study on Thermal Stress Reduction in TiC–Steel Brazed Joints Using Polymer-Derived Composite Interlayers
Abstract: In this, an experimental investigation aimed at reducing crack formation due to thermal stress in TiC-steel brazed joints through optimization of key process parameters is presented. The primary objective was to develop an integrated and reliable brazing strategy by examining the effects of filler material selection, brazing gap, cooling conditions and type of flux. In this study, polymer-derived composite interlayers were developed through controlled synthesis and nanocomposite engineering to mitigate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 524–540 Read article
-
Influence of Infill Density on Structural Performance of FDM-Processed PET-G Polymer: Experimental Validation through Quadcopter Flight Testing
Abstract: Polyethylene terephthalate glycol-modified (PET-G) is an amorphous thermoplastic copolymer increasingly adopted in structural applications through fused deposition modeling (FDM). However, the correlation between FDM processing parameters, especially infill density, and mechanical performance of PET-G parts remains inadequately characterized under real-life loading conditions. This study investigates how infill density (10% and 30%, grid pattern) influences the structural integrity of FDM-processed PET-G components, validated experimentally through quadcopter airframe fabrication and flight testing. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 644–656 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
Optimized Utilization of Kota Stone Slurry Waste in Fly Ash–Based Geopolymer Mortar: A Taguchi-Driven Approach
Abstract: The large-scale generation of stone-processing wastes presents a critical sustainability challenge and an opportunity for value-added reuse in construction materials. This study develops a high-performance fly ash geopolymer mortar by partially replacing Class F fly ash with Kota stone slurry waste (KSSW) and optimizing the key mix parameters using a Taguchi design framework. Five governing factors—binder replacement level, NaOH molarity, sodium silicate–to–sodium hydroxide ratio (SS/SH), curing temperature, and alkaline solution-to-binder …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 426–445 Read article
-
Impact of Fracture in Geometrical, Material, and Load Rate Characteristics on J-Integral
Abstract: The present study investigates the influence of load rate, geometrical parameters, and material properties on the J-integral behavior of AA2050-T84 aluminum-lithium alloy using three-dimensional elastic–plastic fracture mechanics (EPFM) analysis. Finite element simulations were carried out using the ABAQUS software to evaluate crack driving forces in compact tension (C(T)) specimens under various mechanical and thermal conditions. The study focuses on the combined effects of strain rate, temperature-dependent strain hardening, specimen thickness …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 38–45 Read article
-
Climate Change and Urban Heat Islands in India: A Review Across Nine Urban Agglomerations
Abstract: Since 1901, anthropogenic climate change has raised India's mean surface temperatures by about 0.9°C, compounding warming. Rapid urbanization creates persistent Urban Heat Islands (UHIs), making cities dangerously hotter than rural areas. A combination of these forces presents acute thermal hazards to hundreds of millions of urban dwellers. The paper discusses the emergence and intensification of UHI in nine large Indian cities (Delhi-NCR, Ahmedabad, Chennai, Hyderabad, Kolkata, Pune, Bengaluru, Mumbai, and …
Published in International Journal of Climate Conditions · Vol. 3, Issue 1, 2026 · pp. 19–34 Read article