Search
40 articles for “tensile strength at break”
-
Development of bio-based foam from Ximenia americana seed oil polyol: Studies on the effect of toluene diisocyanate (TDI) on some properties of the foam
Abstract: Polyurethane foam is a very important and valuable industrial product. In this study, polyol synthesized from Ximenia americana seed oil was used in the production of bio-based polyurethane foam. Different amounts (2mL, 4mL, 6mL, 8mL and 10mL) of toluene diisocyanate (TDI) were used in the formulation of the foams, and the effect of the varied amount of TDI was investigated by studying the foams’ properties such as the density, tensile …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 1, 2019 · pp. 5–11 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article
-
Review and analysis of the Programmable Tungsten Inert Gas Welding Machine
Abstract: The purpose of this study is to examine metal inert gas (MIG) and tungsten inert gas (TIG) welding processes. This study focuses on welding defects with various kinds of AISI- 1020 mild steel welding joints when using metal inert gas (MIG) and tungsten inert gas (TIG). The impact of different process variables on mild steel welding was looked into. In this study, the main process parameters were changed, and destructive …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 2, 2026 Read article
-
Potential of Midrib of Cocos nucifera Leaf for Reinforcement of Plastics
Abstract: AbstractCoconut palm (Cocos nucifera) is an abundant crop of tropical areas. In the present work, mechanical properties of midrib of coconut palm leaf as tensile strength, tensile modulus, flexural strength, flexural modulus impact strength and elongation at break is experimentally determined and compared with other fibers. Single-fiber pull-out test is conducted to determine critical embedded length and interfacial adhesion between fiber and matrix for reinforcement in polyester resin. Tensile test …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 25–32 Read article
-
Machine Learning-Assisted Design and Optimization of Lightweight Polymer Composites for IoT-Enabled Automotive Applications
Abstract: This study aims to develop an integrated machine learning and optimization framework for the intelligent design of lightweight polymer composites suited for IoT-enabled automotive applications. The goal is to enhance material performance while satisfying multiple design constraints such as mechanical strength, thermal stability, and process compatibility. A curated dataset of polymer composite formulations was used to train a Random Forest Regression (RFR) model capable of predicting tensile strength, thermal conductivity, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 12–27 Read article
-
Evaluation of Modified Nanoparticles' Effects on Polypropylene Composites
Abstract: Numerous sectors use nanoparticles and nanocomposites in a range of applications, including medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis. Polymeric nanocomposites, which combine organic polymers with inorganic nanoparticles, are a novel family of materials that perform better than their microparticle counterparts. They should therefore enhance the field of engineering applications. A polymer matrix's characteristics can be drastically changed by the addition of inorganic …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 23–34 Read article
-
Mechanical Property Assessment of Hybrid Fiber Reinforced Composites Through Experimental Research
Abstract: Natural fibre reinforced composites are gradually taking the place of synthetic fibre composites due to its inexpensive cost, low density, and ease of supply. Furthermore, the addition of some waste materials to composites has remarkable properties that are attracting interest from a wide range of technical domains. Fibre reinforced with glass, carbon, and jute were used to generate hybrid composites. As a filler, different amounts of eggshell powder were mixed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 244–251 Read article
-
STUDIES ON MECHANICAL, THERMAL AND PERMEATION PROPERTIES OF HDPE (BLOW GRADE) WITH MICROSILICA CLAY
Abstract: HDPE is widely used in container applications. The mechanical properties and barrier properties can be further improved by the addition of reinforcements like nanoclays. But, however the cost of nanoclays are higher about Rs.5000 – 6000/kg whereas micro silica cost is economical about Rs.450-1000/kg. Hence we used micro silica of 270nm particle size in this project with HDPE blow grade. HDPE (High density polyethylene) was melt blended with micro silica …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 41–53 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Investigation on Mechanical Properties of Bamboo-Plastic Composites by Alkali Treatment and Illustration via Scanning Electron Microscopy
Abstract: The morphological properties, tensile and flexural strength of composite materials made of bamboo fibres and plastic were investigated. Bamboo-plastic composites (BPCs) were made from bamboo fibres, plastic, and urea formaldehyde (UF) resin to evaluate the effects on mechanical properties. Two different types of plastics, namely polypropylene (PP) and low-density polyethylene (LDPE) were used to make the composite fabrication. The bamboo fibres were extracted after soaking them in a sodium hydroxide …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 86–95 Read article
-
BisGMA/Thermoplastic Polymer Blends: A Study of Mechanical and Corrosive Properties
Abstract: AbstractThe objective of this work is to synthesize various blends of Bisphenol-A-glycidyldimethacrylate (BisGMA) resin with different proportions of thermoplastic polymers like poly-N-vinylpyrrolidone (PVP) and poly-ethyleneoxazoline (PEOZ) and to study their mechanical and corrosive properties. The experimental results showed that BisGMA/PVP and BisGMA/PEOZ blends displayed an improvement in the mechanical properties over unmodified BisGMA resin and the 50:50 blend system is the optimum blend composition in both BisGMA/PVP and BisGMA/PEOZ blends. …
Published in Journal of Polymer & Composites · Vol. 1, Issue 2, 2013 · pp. 1–14 Read article
-
STUDIES ON MECHANICAL, OPTICAL AND BARRIER PROPERTIES OF LOW DENSITY POLY ETHYLENE WITH MICRO CLAY
Abstract: LDPE (Low density Poly ethylene) was melt blended with micro clay (0.5, 1, 3 & 5 wt%) by using a twin screw compounding extruder. Tubular blown film was taken using a tubular blown film extruder. Mechanical, optical and barrier properties were evaluated. The following trend was observed as the micro clay concentration was increased: The tensile strength was increased by 18% in machine direction (M/D) and decreased by 36% in …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 23–31 Read article
-
Influence of SlS Parameters on Strength and Fatigue Durability of Polyamide-12
Abstract: Selective Laser Sintering (SLS), a laser-based polymer powder bed fusion process, has gained prominence in the fabrication of high-performance thermoplastics such as Polyamide-12 (PA12). This paper provides an extensive review of how key SLS process parameters—such as laser power, scan speed, hatch spacing, and energy density—affect the mechanical properties of PA12 components, with a specific focus on tensile strength and fatigue resistance. Studies demonstrate that increasing energy input enhances particle …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 178–191 Read article
-
High-Performance Biodegradable Films from Bamboo Derived Cellulose Nanofibers and Silk Fibroin: Engineering Sustainable Polymer Composites
Abstract: This research presents the advancement of biodegradable composite films from cellulose nanofibers (CNFs) extracted from bamboo and silk fibroin (SF) derived from Bombyx mori cocoons. CNF/SF composites were fabricated in three different compositions—CS10, CS30, and CS50—via aqueous blending and solution casting, followed by ethanol-induced β-sheet stabilization. Mechanical testing confirmed a considerable enhancement in tensile strength from 72 MPa (CS10) to 112 MPa (CS50), while Young’s modulus improved from 2.4 GPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 256–265 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Estimation of Mechanical Properties of Kevlar/Basalt Intrawoven Composite Laminates Containing Nanoparticles
Abstract: Purpose: The research describes estimation of various Mechanical properties like compression, tensile, shear and impact strength of Kevlar/Basalt (KB) Intrawoven 1×1 composite laminates, each comprising 1%, 3% and 5% of Al2O3 (Aluminium oxide) nanoparticles. Design/methodology/approach: These are woven with the help of manual handloom weaving machine, compression moulding technique was adopted for the fabrication of hybrid composite laminates. Attempts have been made to analyse the mechanical properties of Kevlar/Basalt intrawoven …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 1–12 Read article
-
Comparative Analysis of Tensile Properties of Virgin and Rice Husk-Reinforced PLA and ABS Filaments
Abstract: This study focuses on evaluating the tensile behavior of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments reinforced with rice husk ash (RHA) particles, in comparison with their respective virgin counterparts. The incorporation of RHA, an abundant agricultural waste by-product, was considered with the objective of developing eco-friendly composites suitable for additive manufacturing applications. Tensile testing was carried out to assess the influence of the reinforcement on the mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 224–229 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
IMPACT OF HYDRATED LIME AND SBS ON HMA MOISTURE SUSCEPTIBILITY
Abstract: Abstract In recent years, many of the newly built asphalt and concrete roads in Baghdad and other Iraqi cities have broken down too soon. This has hurt the country's economy and public safety. One of the main reasons why these newly built roads break down is because of water damage. Leaking water weakens the bond between the aggregate and the asphalt, which makes it more likely that sidewalks will fall …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 81–93 Read article