Search
37 articles for “photovoltaic property”
-
Experimental Investigation on Nitrogen Oxides Air Pollutant Reduction Characteristics of Cement Mortar Using Sustainable Photocatalytic Material
Abstract: Emissions of nitrogen oxide (NOx) should be diminished to address the facts of urban air pollution and its health and environmental consequences. This study explores the potential of NOx reduction of photovoltaic pollutants in cement mortar using titanium dioxide (TiO2) as a photovoltaic material. NOx is one of the major pollutants of urban air, related to the problems of smog and acid rain, with serious health hazards. The study focuses …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 · pp. 26–40 Read article
-
Neuromorphic Self-Learning Polymer–MXene Photovoltaic Composites with Embedded Memristive Energy Routing for Adaptive Solar Energy Harvesting
Abstract: This dynamic and fast-growing intelligent renewable energy system requires photovoltaic materials that can autonomously adapt to fast-changing environmental conditions. In this study, a novel system is proposed for adaptive harvesting of solar energy based on Neuromorphic Self-Learning Polymer–MXene Photovoltaic Composites (NSPMPCs) with embedded memristive energy routing networks. To boost the charge generation and charge transport in the polymer–MXene heterostructure, the flexibility and processability of conductive polymers are integrated with the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 453–488 Read article
-
Polymer Encapsulants for Photovoltaic Modules: Electrical Insulation Performance and Long-Term Durability under Accelerated UV Exposure
Abstract: Influence on the reliability and service life of PV modules is a major issue, which is influenced by the encapsulant degradation in long-term exposure to the sun's ultraviolet (UV) radiation. A systematic accelerated UV aging study of Ethylene Vinyl Acetate (EVA), Polyolefin Elastomer (POE), and Polyvinyl Butyral (PVB) films under IEC 61215-2:2021 specified test chamber conditions of Q-UV is conducted. The material properties were tested at various exposure intervals including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 384–408 Read article
-
Recent Progress in the Development of High- Efficiency Perovskite Solar Cell Using Copper Iodide (CuI) as Hole Transport Layer
Abstract: Solar cells are a practical option that could potentially require additional energy sources for developing new clean energy. A renewable source of electricity is characterized by its affordability, accessibility, and zero emissions from greenhouse gases. By converting sunlight photons into electrical power, photovoltaic cells are a viable option. The last two decades have witnessed numerous material opportunities for scientific advancements in photovoltaic technology, which have resulted in reduced costs and …
Published in Journal of Semiconductor Devices and Circuits · Vol. 11, Issue 1, 2024 Read article
-
Techniques of Atomic Structure Orbit Potential of The Frequency Characteristics of Silicon Element
Abstract: This study explores the technological applications and material integration of semiconductor materials, with a focus on their electronic properties and practical implementations. The investigation primarily addresses four key objectives: analyzing the electronic band structure and density of states (DOS) of semiconductor materials, evaluating the band alignment in heterojunctions, and integrating these materials into practical technological applications. Using a simplified tight-binding model, we compute and plot the electronic band structure of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 16–32 Read article
-
AI-Based Discovery of High-Performance Energy Storage Polymer Composites: A Comprehensive Review
Abstract: The accelerating global demand for high-performance energy storage systems has stimulated significant research into advanced polymer composites as next-generation electrolytes, electrode binders, and functional membranes for batteries, supercapacitors, and photovoltaic devices. However, the vast compositional and structural design space of polymer materials presents formidable challenges for conventional trial-and-error discovery strategies, which remain slow, costly, and biased by prior expert knowledge. Machine learning (ML) and artificial intelligence (AI) have emerged as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1083–1097 Read article
-
Machine Learning Framework for Optimizing Polymer–Metal Oxide Composites as Charge Selective Layers in Perovskite Solar Cells
Abstract: To achieve high-performance and stability of perovskite solar cells (PSCs), it was important to incorporate innovative interfacial materials to tune the balanced charge extraction, low recombination, and enhanced operational lifespan. On this note, polymer composites with metal oxides have been proposed as promising candidates as charge selective layers (CSLs), whereby they present a rare combination of tunable energy levels, improved film forming abilities, and better interface engineering capabilities. In this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1073–1098 Read article
-
Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering
Abstract: Semiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in electronics industry, as silicon is brittle in nature and has low efficiency, which makes it unsuitable for transparent and flexible device. Zinc oxide (ZnO) is emerging as popular choice of researchers due to its wide range of properties, abundancy and non-toxicity. This work explores the properties of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 50–56 Read article
-
Design Strategies of Polymer Composite Components for Sustainable Renewable Energy Microgrids
Abstract: Increasing power demand and variable performance requirements in renewable-energy systems motivate integrating advanced polymeric and composite materials into microgrid components to improve reliability and performance. This paper presents a design and control framework for a standalone microgrid that couples power-electronic and energy-conversion subsystems with polymer-composite–based components to enhance durability, thermal management, and electromagnetic shielding. The microgrid uses a doubly fed induction generator (DFIG) for wind generation to enable independent active …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 63–71 Read article
-
Fabrication of Low-Cost and High-Efficiency Crystalline Silicon Solar Cells Using Polymeric Carrier Selective Contacts
Abstract: Crystalline silicon (c-Si) solar cells are the leading choice in the photovoltaic market due to their dependability and long-term stability, but lowering production costs and increasing efficiency remain key issues. Organic semiconductors use carrier-selective contacts based on doped amorphous silicon layers and transition metal oxides to simplify and lower the production costs of efficient crystalline silicon solar cells. Polymers are rapidly being used in photovoltaics as flexible substrates, photoanode films, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 124–131 Read article
-
A Review of Electrical Conduction, Optical Sensing, and Semiconductor Device Innovations
Abstract: Electrical conduction and semiconductor device technologies form the backbone of modern electronic and sensing systems. This review presents a comprehensive analysis of conduction mechanisms across different materials, including conductors, semiconductors, and insulators, with particular emphasis on charge carrier behavior, resistivity, and energy band structures. The study highlights how variations in material properties and external conditions influence electrical performance and device efficiency. The paper further explores advancements in semiconductor devices, focusing …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 1, 2026 · pp. 10–18 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
Recent Advances in Polymer-Based Thermal Management Technologies for Hybrid PV/T Solar Desalination Systems: A Critical Review
Abstract: Hybrid photovoltaic-thermal (PV/T) desalination systems are being developed as a new approach that not only generates clean water but also harnesses solar energy. While tremendous progress has been made in terms of design, the thermal management of PV/T desalination systems still poses several problems, such as heat generation, temperature non-uniformity, and inadequate thermal energy storage, all of which adversely affect the efficiency of electricity generation and clean water production. In …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 921–931 Read article
-
Synthesis and Characterization of In2S3 Nanoflake Thin Film for Photosensor Applications
Abstract: Indium sulphide (In2S3) thin films in the form of nanoflakes are synthesized by using chemical vapour deposition method on glass substrate with the intension to test its photosensor applications. These as deposited nanoflake thin films are characterized for physicochemical properties using X-ray diffraction (XRD) pattern, energy dispersive X-ray (EDAX) analysis,scanning electron microscopy (SEM) while optoelectronic properties were studied using optical and electrical characteristics obtained through UV-Vis transmission spectroscopy and I-V …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 21–26 Read article
-
Performance Analysis of Dual Junction Solar Cell Devices utilizing Subcells of In0.51Ga0.49P and GaAs to Study Key Solar Cell Parameters via TCAD based Simulation
Abstract: In the present work, a multi-junction solar cell was designed to obtain better performance over single-junction solar cells. The proposed structure is composed of different layers of diverse semiconductor materials stacked on each other. Here, an In0.51Ga0.49P/GaAs double-junction solar cell was outlined as having a distinctive composite material (GaAs) as the tunneling junction. To optimize the solar cell's effectiveness, In0.47Ga0.15Al0.37P was used in the window layer and the back-surface field …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 829–837 Read article
-
A Comprehensive Analysis of Coating Technology and Thin Films
Abstract: In contemporary materials science, thin film and coating technologies are essential because they allow for the improvement of surface characteristics, including electrical conductivity, hardness, corrosion resistance, and optical performance. These technologies use physical, chemical, or hybrid deposition techniques to deposit materials in layers that range in thickness from a few nanometres to several micrometres, depending on the required functional properties and application areas. The content, thickness, and microstructure of films …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 50–64 Read article
-
Anti-Soiling Coating Technologies for PV Panels Under Dust Storm Conditions
Abstract: Background: Deployment of photovoltaics (PV) in arid and semi-arid areas where there is ample sunlight has been increasing quickly because of their high solar irradiation. The rising number of dust storms, as well as depositing particulate matter into the air, has caused a significant decrease in energy production due to reduced transmittance of light through the surface of the PV panel from the dust on the panel’s surface. This has …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 28–38 Read article