Search
73 articles for “oil fields”
-
Performance of Water Injection in Oil Rim Reservoir Recovery Factor
Abstract: This study examines the potential improvements in recovery factors in optimizing oil production from oil rim reservoirs through water injection and without water injection (i.e. primary production) scenarios in the development strategies of the oil rim reservoirs. A generic simulation model developed from ECLIPSE dynamic simulator was used as core representative of oil rim reservoirs to experiment production optimization with and without water injection. Reservoir data of permeability, oil rim …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 3, 2014 · pp. 31–38 Read article
-
Lithological Characterization and Reservoir Characteristics by Computerized Tomography Assisted Micro Density Log of the Rock
Abstract: Lithological characterization of the unconsolidated rock from heavy oil field has been attempted using X-ray computerized tomography imagine techniques. A micro density log is generated to obtain the hidden information of such variations along the depth at microlevel, which normally is not available through conventional log. Useful exploratory leads have been obtained through characterization of the nature of reservoir using simple petro-physical techniques on conventional cores by defining reservoir grade, …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 9–11 Read article
-
Mathematical Modeling of Managed Pressure Drilling
Abstract: Managed pressure drilling (MPD) is an adaptive pressure drilling technique, which is preferably used in matured oil fields. This brings in the various issues of matured fields which can be easily managed by the MPD. Paper presents the mind map which can be used for further development of this technique. Further, it also presents the parametric mathematical modeling of MPD which can be used for adaptive control and demonstration. Four …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 3, 2014 · pp. 9–17 Read article
-
CO2-EOR and Geological Storage Option in the Bohaiwan Basin, East China
Abstract: In this paper, the geological assessment of the Bohaiwan Basin in eastern China for the COACH (Cooperation Action within CCS China-EU) project is introduced. The results indicated that storing carbon dioxide in this region will be technically challenging and require a flexible storage solution. A pilot is suggested in Dagang for simultaneous injection with both enhanced oil recovery and storage. The analysis offers valuable reference in simultaneous injection of CO2 …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 13–17 Read article
-
An Overview of Recent Advances in Viscoelastic Surfactant based Fracturing Fluid Technology
Abstract: High percentages of oil and gas wells are hydraulically fractured worldwide in order to make economically producible at an efficient production rate. Cross-linked polymer fluids are in use for decades to stimulate oil and gas wells. Even though these fluids exhibit exceptional viscosity, thermal stability, proppant transportability and fluid leak-off control; extensive formation damage by polymer residues demanded a clean fracturing fluid technology. New generation of fracturing fluids based upon …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 11–25 Read article
-
Estimation of Dulling Rate and Bit Tooth Wear Using Drilling Parameters and Rock Abrasiveness
Abstract: Optimisation of the drilling operations is becoming increasingly important as it can significantly reduce the oil well development cost. One of the major objectives in oil well drilling is to increase the penetration rate by selecting the optimum drilling bit based on offset wells data, and adjust the drilling factors to keep the bit in good condition during the operation. At the same time it is important to predict the …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 1–20 Read article
-
Evaluating Lift Systems For Oil Wells Using Integrated Production Modeling: A Case Study Of A Niger Delta Field
Abstract: An integrated production model for evaluating artificial lift systems is presented in this study to ascertain the need to install an artificial lift system or continue with natural flowing mode. An integrated model comprising of reservoir, wellbore and surface facility models representing basic stages of production. The integrated model took into consideration, factors that affect the liquid production at these stages and provide total liquid production at the surface, which …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 32–48 Read article
-
Determination of Residual Oil Saturation and Connectivity between Injector and Producer using Interwell Tracer Tests
Abstract: In this paper, based on simulation, a reservoir is first waterflooded and then the interwell tracer tests are used to determine the residual oil saturation (Sor) and connectivity in the region between the injector and producer pairs. In the end, the field wide average oil saturation from the simulation is compared with those from the interwell tracer test analysis. The simulation results shows that average Sor in the region between …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 18–24 Read article
-
Bioremediation of Crude Oil-Contaminated Loamy Soil Using Plantain (Musa Paradisiaca) Stem Waste as a Biostimulant
Abstract: Crude oil contamination of soil is a pressing environmental challenge in oil-producing regions, especially in the Niger Delta of Nigeria. It degrades soil fertility, disrupts microbial ecosystems, and poses long-term ecological and health risks. Traditional remediation methods are often cost- prohibitive and environmentally intrusive, prompting the search for sustainable alternatives. This study investigates the potential of plantain (Musa paradisiaca) stem waste – a readily available agricultural byproduct – as a …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 1, 2026 · pp. 1–11 Read article
-
Understanding the Role of Remote Sensing Techniques in Monitoring Air Quality for Effective Adherence to Environmental Impact Assessment Practices in Nigeria
Abstract: The paper reviews the Nigerian Environmental Impact Assessment (EIA) Act, outlining the established air quality thresholds and emission caps for stationary sources. The standard applies to; common pollutants like sulphur dioxide, carbon monoxide, ozone, particulate matter and nitrogen oxides; toxic metals such as arsenic, nickel, cadmium and mercury; as well as volatile organic compounds, ammonia, antimony, zinc, formaldehyde and radon.It also describes the major classifications of remote sensing applications, including …
Published in International Journal of Satellite Remote Sensing · Vol. 4, Issue 2, 2026 Read article
-
Modification in Stacks Design for the Integrated Incinerator–Fired Heater System Using CFD
Abstract: AbstractIn a unique integration of its kind, incinerator hot flue gases are routed below convection section of fired heater for enhanced heat recovery for an ongoing oil and gas field development projects. High degree of flue gas mixing between incinerator and heater flue gases is desired at inlet section of coils in convection section for optimal heat recovery. Also design of stack should take care of required draught in incinerator …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 27–35 Read article
-
Review of Subsea Pipeline for Minimizing Thermal and Pressure Expansion
Abstract: As the offshore oil and gas fields have been exploited in deeper water, subsea pipelines are required to operate at high temperatures and pressures. It causes subsea pipelines to be more subject to movements both in lateral and axial directions due to the loads produced by high temperatures and pressures. Some high temperature pipelines have experienced the cumulative axial displacement of an overall pipeline length over a number of start-up/shut-in …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 10–22 Read article
-
Calculation Method for Determining the Gas Flow Rate Needed for Liquid Removal from the Bottom of the Wellbore
Abstract: As a result of flooding and accumulations of liquid at the bottomholes, the operating conditions of gas wells become complicated, so that they end up self-squeezing and losing of gas production. A method is proposed for determining the technological parameters of operation of the gas wells with the purpose of removing liquid from the bottom of the wells. Data from the gas dynamics and special studies were used to develop …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 1–8 Read article
-
Production, Characterization and Toxicological Evaluation of Eco-Friendly Flavolipid Biosurfactant
Abstract: At present majority of surfactants are chemically synthesized. Nevertheless, in recent years, much attention has been directed towards biosurfactants due to their broad range of functional properties, there are cheaper as they can be produced from alternative sources. They have applications in the fields, such as: oil recovery process, as an additive in food processing industry, pharmaceuticals preparations, energy saving technologies etc. As they are being microbial derivatives, it is …
Published in Research and Reviews: A Journal of Toxicology · Vol. 4, Issue 1, 2014 · pp. 16–21 Read article
-
Status of Alkaline Flooding Technology
Abstract: Very few review papers on alkaline flooding have been published in the petroleum literature. One paper gives an extensive review of caustic mechanisms to improve oil recovery, followed by a brief description of a few trials. The other paper summarizes the field tests completed, in progress and planned by 1983. This paper will not repeat a detailed discussion of mechanisms and a presentation of individual field projects. Only a brief …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 44–50 Read article
-
Artificial Intelligence and Edge Computing in Oil and Gas: Applications, Architectures, and Operational Realities
Abstract: Artificial intelligence has arrived in oil and gas, and unlike some previous waves of digital enthusiasm in the sector, this one is sticking. Saudi Aramco analyses approximately 10 billion data point every day and reported USD 4 billion in technology-driven operational gains in 2024. ExxonMobil uses AI to increase shale well output by more than 5 percent. Shell has deployed machine learning across more than 10,000 assets using C3.ai to …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 01–06 Read article
-
A Study on the Low Salinity Waterflooding (LSW) in a Part of a Depleted Oilfield of Upper Assam Basin
Abstract: Maximizing the hydrocarbon recovery from depleted oilfields is the biggest challenge now a days which becomes an opportunity for advanced EOR technologies. One of such EOR technology that can promote the oil recovery efficiency from such fields is the low salinity waterfloofing (LSW) which gains the attention of many researchers due to its easiness to use implications, less cost and environment-friendly nature. Different studies have shown that fines migration, pH …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 30–38 Read article
-
Calculation Improvement of the Clay Content in the Hydrocarbon Formation Rocks
Abstract: Natural radioactivity of reservoir rocks of oil and gas in East Baghdad field is due to not only their content of clay material, but also the existence of uranium located in the skeleton of rocks. In connection with this, for the shale content determination of reservoir rocks, it is necessary to exclude the uranium contribution from the overall intensity of the gamma radiation. The paper presents the results of a …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 1–3 Read article
-
Determination of Possible Point of Wax Depositionalong Flowlines in the Niger Delta
Abstract: The focus of this study is to determine the possible point of wax deposition along an oil flowline in Niger delta. This research commenced with field studies to ascertain the flowline profile. The temperature profile along the flowline was determined using infra-red thermometer. Crude oil sample was taken from wellhead and laboratory analysis was carried out on the crude sample to determine the wax appearance temperature (WAT) of crude and …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 1–8 Read article
-
A Potential Evaluation and Pilot Test of CO2 Miscible Injection in Daqing, China
Abstract: The paper introduces the entire process for a CO2 injection in the Fang-48 Group, Daqing Oilfield. A study using experiment and full-field reservoir modeling investigated and optimized the design of a CO2 miscible flooding project for Fang-48 Group, Daqing. The study began with extensive data gathering in the field and building a full-field three-dimensional geologic model. A full-field simulation model with relatively coarse gridding was subsequently built and used to …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 1, 2013 · pp. 8–13 Read article