Search
318 articles for “nano composite”
-
Effect of Carbon Nanotube on Mechanical Properties of Jute Fibre Reinforced Polyester Composite
Abstract: The current study studies how carbon nanotubes affect the mechanical characteristics of polyester composites reinforced with jute fiber, both treated and unprocessed. Alkali was used to cure jute textiles. Composites with treated and untreated jute fibre with 5%, 10% and 15% jute fibre loading with and without carbon nanotube were prepared using hand lay-up process. Carbon nanotubes varied from 0.2%, 0.4% and 0.6%. Tensile, flexural, and strength of impact all …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 1–9 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Sustainable Development of Carbon–Sisal Reinforced Polyester Composites through Green Nanotechnology
Abstract: This study presents the sustainable development of carbon–sisal fiber reinforced polyester composites enhanced through green nanotechnology for improved mechanical performance and environmental compatibility. The hybrid composites were fabricated using varying fiber ratios - C1 (70% carbon, 30% sisal), C2 (60% carbon, 40% sisal), and C3 (50% carbon, 50% sisal) - with an optimized addition of 1 wt.% nano-silica (SiO2) synthesized via a green sol–gel route. The tensile, flexural, and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1179–1194 Read article
-
Investigation of Microstructural and Tensile behaviour of stir-casted Al5052-based Composites with nano-reinforcements
Abstract: Aluminium-based composites have gained popularity in the aviation, automotive, and marine sectors as a result of their exceptional strength-to-weight ratio and also due to resistance to wear and corrosion. The current investigation involves the examination of the microstructural and tensile behaviour of stir-casted Al5052-based composites. The nanoparticles of 1% titanium diboride and 1% zirconia were added as reinforcement materials. To better understand the microstructure of the composite specimens, scanning electron …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–7 Read article
-
Advances in Polymer Chemistry for Zinc Oxide Nanoparticle-Based Composites in Moisture Sensing Applications
Abstract: In present scenario the application of Polymer chemistry is various domain. It is used in sensing the moisture. This paper explores the synthesis and application of zinc oxide nanoparticles (ZnO-NP) deposited on polymer-based hygroscopic substrates to enhance the dielectric properties of capacitive sensors. The novel composite material, comprising ZnO-NP and cellulose-based substrates, offers superior moisture sensitivity, stability, and cost-effectiveness compared to conventional sensing materials. The synthesis process involves the controlled …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 79–85 Read article
-
Study on Partial Replacement of Cement with Pinus Fiber and Nano Silica in M30 Concrete Paver Blocks: A Fiber-Reinforced Polymer-Cement Composite Approach
Abstract: This study investigates the partial replacement of cement in M30 grade concrete paver blocks using nano silica and Pinus fiber, with a primary focus on mechanical performance, sustainability, and long-term durability and promoting sustainability. Portland cement, a major contributor to global CO₂ emissions, can be partially substituted using supplementary materials to create eco-efficient construction solutions. Nano silica, due to its high pozzolanic reactivity and ultrafine size, improves the microstructure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 63–76 Read article
-
Innovative Polymer Nanocomposites: Bridging Sustainability and Advanced Material Performance
Abstract: This study examines the evolution of bio-based polymer nanocomposites using eco-friendly synthesis methods to improve mechanical, thermal, and barrier properties. It involves the combination of sustainable synthetic polymers with natural polymers in the presence of nanofillers in a green and compatible fashion to generate durable nanocomposites. Optimal alignment of nanofillers with the polymer matrices can be achieved using solvent casting, melt blending, and in-situ polymerization as fabrication methods. Consequently, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1671–1679 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: The nanocomposites Ag NPs-zeolite involve zeolite loaded with silver nanoparticles and have been prepared by an easy one-pot hydrothermal autoclave method. Three samples of silver-bearing zeolite were prepared for 8 hours, 6 hours, and 4 hours, respectively, inside an autoclave at 100°C. A range of characterization procedures were used to examine the samples, such as x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV-visible spectroscopy, and zeta potential. Results …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 80–90 Read article
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article
-
Synergistic Effect of Green Nanofillers on Basalt–Kenaf Reinforced Sustainable Polymer Composites
Abstract: This study examines the synergistic impact of green nanofillers on the mechanical and structural properties of basalt–kenaf fiber reinforced polyester composites, with the objective of developing sustainable, high-performance polymer materials. The composites were produced with different fiber ratios: B1 (70% basalt, 30% kenaf), B2 (60% basalt, 40% kenaf), and B3 (50% basalt, 50% kenaf), and were reinforced with 1 wt.% green-synthesized nano-TiO2, obtained using an eco-friendly sol–gel technique with plant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1248–1262 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Polymers and Composites in the Design and Construction of Unmanned Aerial Vehicles: A Comprehensive Technical Review
Abstract: The emergence of Unmanned Aerial Vehicles (UAVs) over the last few years has mostly been made possible by breakthroughs in material science. This review is concerned with an overview of some of the polymers and composites that are being commonly used in drone manufacturing in recent times, especially in relation to the influence of material choice on drone performance and capability. It sheds light on the drastic change in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 874–882 Read article
-
Mechanical Strength Prediction of Nano-Silica Concrete Composites Using Machine Learning Techniques
Abstract: Nano-silica, or nanosilica, refers to silicon dioxide nanoparticles, which are a kind of silica (SiO₂) with diameters that often fall below 100 nanometers. This nanomaterial has attracted considerable attention because of its distinctive characteristics and diverse array of uses, notably in augmenting the performance of materials such as concrete. The integration of nanoparticles with cementitious matrix in nano-silica concrete offers a viable approach to improving the mechanical characteristics and longevity …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 963–973 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Thermo-Mechanical and Electrical Properties of Multi-Walled Carbon Nanotube-Enhanced Polyimide Composites for Aerospace Thermal Protection Systems
Abstract: Advanced aerospace thermal protection systems (TPS) require multifunctional materials that simultaneously provide high thermal stability, mechanical strength, and reliable electrical performance. Polyimide (PI) is widely used in aerospace structures due to its lightweight design and exceptional thermal durability, yet its low thermal conductivity and insulating behavior limit its effectiveness in heat dissipation and electromagnetic interference (EMI) shielding applications. This study addresses these limitations by developing multi-walled carbon nanotube (MWCNT)-reinforced polyimide …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 966–982 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Sustainable High-Strength Geopolymer Composite Reinforced with Nano-Silica and Basalt Fibers: Mechanical and Microstructural Evaluation
Abstract: Sustainable soil composites (SSC) were formulated by incorporating red earth with varying proportions of bagasse ash (BA) and hydrated lime to enhance geotechnical performance and promote the reuse of agro-industrial waste. Red earth served as the primary structural matrix, BA functioned as a pozzolanic filler, and lime acted as a chemical stabilizer. BA content ranged from 0% to 60%, identifying 10% as the optimum level for significant improvement, and lime …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1113–1122 Read article
-
Water Hyacinth-Derived Biopolymers as Reinforcements for Sustainable Fiber-Reinforced Polymer Composites
Abstract: Composting has gained significant attention for sustainable waste management and nutrient recycling. This study investigated the efficacy of water hyacinth (Eichhornia crassipes) as a composting material to produce nutrient-rich organic fertilizer. Water hyacinth compost inoculated with nitrogen-fixing (Azotobacter chroococcum) and phosphate-solubilizing bacteria (Pseudomonas putida) exhibited increased nitrogen and phosphorus content compared to uninoculated compost or cattle dung compost. Wheat grown with biofertilizer-enriched water hyacinth compost displayed significantly improved grain yield, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1012–1017 Read article
-
Silver Nanoparticles Loaded Polyurethane Composites for Antibacterial Medical devices
Abstract: Polyurethane (PU) polymer is widely used in biomedical application. In our study we have combined polyurethane with silver nanoparticles to develop a nanocomposite material for antibacterial medical applications. Such combination has antibacterial properties and control the toxicity too. In current research we have mixed the different sizes and types of silver nanoparticles into the polyurethane matrix. The result was their antibacterial activity, mechanical strength, and biocompatibility. The antibacterial performance of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article