Search
194 articles for “high-temperature composites”
-
Experimental Analysis of Residual Stress, Micro-Hardness and Corrosion Behavior of HVOF Sprayed Composite Coating
Abstract: The utilisation of non-traditional composite coating materials, enhanced lubrication, and surface geometry optimisation have all contributed to the tribological performance. Piston rings are among the most crucial engine parts since friction causes between 40 and 45 percent of all energy loss. Fuel efficiency, power loss, and exhaust pollutants are all strongly impacted by the piston assembly's tribological performance. The present study's primary goal was to develop composite coating by using …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 77–82 Read article
-
Thermally Regulated Polymer-PCM Composites for Efficient Solar Energy Harvesting and Storage
Abstract: This study investigates the development of high-performance; shape-stabilized polymer composites infused with phase change materials (PCMs) for thermal energy storage in solar energy applications. Polyethylene glycol (PEG-6000) was employed as the core PCM due to its high latent heat and suitable melting point, while high-density polyethylene (HDPE) served as the supporting polymer matrix to provide structural stability. One of the primary limitations of PEG-based PCMs is their inherently low thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 153–163 Read article
-
Smart Polymer Composites with Multifunctional Capabilities Integrating Electroactive Polymers Conductive Nanofillers and Flexible Electronics for Advanced Sensing and Actuation Systems
Abstract: Smart polymer composites have gained significant attention to their ability to integrate polymer matrices with conductive nanofillers, offering tunable electrical, mechanical, and electroactive properties. These composites are highly responsive to external stimuli such as electrical fields, mechanical stress, and temperature variations, making them ideal for applications in flexible electronics, soft robotics, and adaptive sensing systems. This research investigates the effect of nanofiller dispersion on the performance of polymer composites, optimizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 946–965 Read article
-
Exploring The Performance Dynamics of Basalt Fibre Reinforced Polymers: Mechanical and Viscoelastic Insights
Abstract: Basalt fibre reinforced polymer (BFRP) composites are gaining significant attention as sustainable alternatives to traditional reinforcement materials due to their superior mechanical performance, thermal stability, and eco-friendliness. This study examines the tensile, flexural, impact, and viscoelastic properties of BFRP composites fabricated via vacuum-assisted resin transfer molding (VARTM) using varying fibre volume fractions (20%, 30%, and 40%) and fibre orientations (unidirectional and bidirectional). The results reveal that composites with 40% fibre …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–22 Read article
-
Characterization of Thermochemical Properties and Combustion Behavior In AP/HTPB Polymer Composite Solid Propellant for Enhanced Performance
Abstract: The thermal decomposition of solid propellants containing hydroxyl-terminated polybutadiene (HTPB) binder is a complex process, driven by multiple interacting chemical and physical factors. Solid propellant combustion characteristics are profoundly influenced by the composition of the propellant, the conditions of pressure, the starting temperature, and a range of aero-thermochemical parameters. The paper explores the influence of polymeric structure in the HTPB binder on thermal decomposition characteristics of the AP/HTPB composite propellants …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 502–511 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Enhancement of Gas Sensitivity of Composites of Carbon Derived from Rubber Tree and SnO2 to Detect Ethanol Vapor at Room Temperature
Abstract: Films of composites of activated carbon powder prepared from saw dust derived from core of rubber tree (Hevea Brasiliensis) and tin oxide (SnO2) were fabricated using the doctor blade method. Carbon powder was activated using phosphoric acid at 500°C for 45 minutes. The weight ratio carbon/SnO2 varied from 0 to 12% in steps of 2. The structural, optical and morphological properties of films were investigated using XRD patterns, UV-visible spectrums …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 31–44 Read article
-
Stretchable Elastomer–PCM Composites with Bluetooth-Enabled Temperature Monitoring for Wearable Healthcare IoT Devices
Abstract: The rapid advancement of wearable healthcare technologies has created a growing demand for multifunctional polymer composites capable of simultaneously providing mechanical flexibility, thermal energy management, electrical conductivity, sensing capability, and wireless communication. In this study, a stretchable elastomer-based polymer composite integrated with a phase-change material and a Bluetooth Low Energy temperature monitoring system was developed for wearable healthcare Internet-of-Things applications. The polymer composite was fabricated using an Ecoflex silicone elastomer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 241–257 Read article
-
Experimental Investigation of Micro-Hardness & Tribological Behavior of Composite Coating for Wear Resistance Application
Abstract: The author effectively created a composite coating with enhanced durability utilizing the HVOF technique in this investigation. The automobile business has encountered fierce worldwide rivalry, rapid technical breakthroughs, and strict regulatory regulations in recent year.. Producers of lubricants, gasoline additives, and worldwide original equipment manufacturers (OEMs) are striving to address the difficulties presented by changing consumer preferences and emerging energy conservation and environmental protection regulations. We have successfully created and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1097–1103 Read article
-
Engineering Sustainable Interior Materials: Performance Analysis of PLA Composites Reinforced with Banana Stem Fiber and Spent Coffee Grounds
Abstract: This study presents the development and classification of eco-friendly composite panels reinforced with spent coffee grounds (SCG) and banana stem fibers (BSF) for interior applications. Hybrid composites were fabricated using polylactic acid (PLA) as the matrix with a constant filler loading of 30 wt%, varying BSF:SCG ratios (70:30, 60:40, 50:50). Mechanical testing revealed that the 70:30 composite exhibited the highest tensile strength (42 MPa) and flexural strength (58 MPa), whereas …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 94–105 Read article
-
Mechanical Property Assessment of Hybrid Fiber Reinforced Composites Through Experimental Research
Abstract: Natural fibre reinforced composites are gradually taking the place of synthetic fibre composites due to its inexpensive cost, low density, and ease of supply. Furthermore, the addition of some waste materials to composites has remarkable properties that are attracting interest from a wide range of technical domains. Fibre reinforced with glass, carbon, and jute were used to generate hybrid composites. As a filler, different amounts of eggshell powder were mixed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 244–251 Read article
-
Effect of Functionalization on glass transition temperature of Carbon Fiber reinforced Epoxy Nanocomposites using MD Simulation
Abstract: As we all know that the mechanical characterization of any material plays a vital role in performance of the material throughout its life cycle. One of the major parameters in calculating the mechanical properties of carbon fiber reinforced nanocomposite is glass temperature. Understanding glass transition behaviour of polymer nanocomposites are crucial for optimizing their mechanical properties and performance. We used “Molecular dynamics simulations” to calculate sequel functionalization effect on glass …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 1–8 Read article
-
Optimization Of Mechanical Properties Of 500/7 Grade Ductile Cast Iron (DCI) By Using SMAW: Applications In Reinforced Composites And Thermoplastics Through Taguchi & GRA
Abstract: Welding, a critical manufacturing process, is broadly engaged to join metals and thermoplastics using heat, pressure, or both. This study inspects the Shielded Metal Arc Welding (SMAW) method to optimize welding parameters and improve the mechanical properties of Ductile Cast Iron (DCI) grade 500/7, a material widely used in high-strength and thermal conductivity applications in aerospace and automotive sectors. Using an L9 OA (orthogonal array), experiments were conducted on nine …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 204–222 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Fabrication and Characterization of Almond Skin Powder Reinforced PLA Based Composite Filaments for Fused Filament Fabrication
Abstract: Researchers around the globe are increasingly utilizing recycling methods to address waste generated from polymers, spurred by the dire need to deal with environmental challenges promoting sustainable practices. Polymers are having highly-stable long-chain polymer structure which makes it difficult to degrade easily posing many environmental and health challenges, hence, recycling of the polymers is the sole method to mitigate harmful effects. However, there has been relatively little focus on producing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 530–539 Read article
-
Functionally Graded Natural Fibre and SiC-reinforced Polymer Composite: Mechanical Properties
Abstract: Multifunctional materials, also called functionally graded materials (FGMs), are based on natural fibres or fillers and vary in composition and/or microstructure to control functional, structural, or thermal, properties. Functionally graded materials (FGMs) have been created for use in spacecraft, aircraft, and other engineering applications because they can withstand extremely high temperatures. Particle-reinforced FGMs, which make up the majority of FGMs, are made differently depending on their position. The mechanical and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 1–14 Read article
-
Synthesis and Ion Transport Studies of a New Potassium Ion-Conducting Nanocomposite Polymer Electrolyte
Abstract: The pursuit of safe, efficient, and sustainable energy storage solutions has intensified research on nanocomposite polymer electrolytes, especially for next-generation battery technologies. This work reports the synthesis and ion transport characteristics of potassium ion-conducting nanocomposite polymer electrolytes (NCPEs), emphasizing their structural, electrical, and electrochemical performance. To enhance ionic conductivity and mechanical strength, polymer matrices were reinforced with nanoscale ceramic fillers. A new potassium ion-conducting NCPEs: (1-x)[70PEO:30KCl] + x SiO₂ (where …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1496–1504 Read article
-
Development of Self-Healing Circuit Boards Using Shape Memory Polymer Composites
Abstract: This study investigates the influence of temperature, humidity, and nanofiller type on the electrical and structural performance of advanced polymer nanocomposites for self-healing circuit applications. Particular attention was given to conductivity retention and the morphological behavior of carbon nanotubes (CNTs), graphene, and silver nanoparticles (AgNPs). Results show that conductivity decreased under elevated thermal–humidity conditions, reflecting the role of environmental stress in material degradation. Among the tested systems, AgNP-based composites achieved …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 746–770 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
A Critical Review on Semi-solid and Solid Lubricants for Industrial Applications
Abstract: Friction materials are very important for the safe moving of automobiles and the safety of people. As the pad slides against its match, the moving energy is turned into heat by the friction. As the vehicle's speed is lost as heat in the pads and rotors, the friction at the contact slows it down. Lubricants are compounds that are applied to moving parts to reduce friction and wear. Used primarily …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 105–114 Read article