Search
45 articles for “fiber reinforced concrete”
-
Buckling Assessment of Concrete Column, RCC Column and Concrete Column Strengthened by CFRP with Different Slenderness Ratio.
Abstract: Using finite element modeling, this study presents a buckling analysis and total deformation assessment of a concrete column, a column made of reinforced cement concrete (RCC), and a concrete column enhanced with Carbon Fiber-reinforced Polymer (CFRP) laminates (FEM). Utilizing the ansys18.1 software, a comprehensive analysis is carried out for columns that have a variety of slenderness ratios to arrive at a more accurate performance estimation. Because they can support the …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. S11–S22 Read article
-
Effectiveness of Concrete Retrofitted with FRP Wrapping Subjected to Higher Temperature
Abstract: This work aims to provide additional insight into the behavior of fiber-reinforced polymer (FRP) laminates at high temperatures. The compressive properties of concrete coated in fiber-reinforced polymer (FRP) under elevated heat levels. The study addresses the important issue of assessing the performance of structural elements, specifically concrete columns, in the event of a fire. Recently, there has been increased interest in fiber-reinforced polymer (FRP) composite materials as a possible concrete …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 17–28 Read article
-
Performance Evaluation of Concrete with Binary and Ternary Blends of Fly Ash, Silica Fume, and Fiber Reinforcement
Abstract: This study evaluates the effect of ground granulated blast furnace slag (GGBS) as a partial replacement for cement on the mechanical properties of concrete, focusing on compressive and split tensile strength. Concrete mixes were prepared with GGBS replacement levels of 0%, 25%, and 50% and subjected to different curing methods, including water curing, steam curing, and conceal curing. These curing methods were selected to investigate their impact on hydration, strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 40–45 Read article
-
Innovations and Comparative Analyses in Foam Concrete: A Review of Emerging Techniques and Materials
Abstract: Foam concrete, recognized for its lightweight and eco-friendly properties, is gaining prominence as a sustainable construction material. However, challenges such as low mechanical strength, performance variability, and limited environmental resistance have prompted significant innovations in recent years. This study synthesizes findings from three key studies focused on enhancing foam concrete’s performance through nanomaterials, natural fibers, and alternative lightweight aggregates. The incorporation of nano-silica and nano-calcium carbonate into coal gangue foam …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 3, 2025 Read article
-
Study the Impact of Corrosive Pollutants on Building Materials Corrosion
Abstract: Reinforced concrete structures (RCS) may be made more resistant to corrosion by using fiber reinforced polymers (FRP). One of the primary concerns with reinforced concrete constructions is corrosion. It causes disintegration in building material components by interactions with salts, acids, and alkalis. Both within and outside of reinforced properties, pollutants and effluents accelerate disbanding. When bio-waste and building materials come into contact, microorganisms and macro organisms, grow and emit acid …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 20–29 Read article
-
Experimental Study on Fresh and Mechanical Properties of Crimpled Steel Fibers in Self-compacting Concrete
Abstract: The flow and strength characteristics of fiber-reinforced self-compacting concrete (SCC) with different aspect (l/d) ratios of fibers are recommended to be studied. After achieving a satisfactory SCC mix, crimped steel fibers with l/d ratio 30 are designated as CSF30; with l/d ratio 40 are designated as CSF40, with l/d ratio 50 is designated as CSF50 and with l/d ratio 62.5 is designated as CSF62.5 fibers are added at a fixed …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 65–75 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Sustainable High-Strength Geopolymer Composite Reinforced with Nano-Silica and Basalt Fibers: Mechanical and Microstructural Evaluation
Abstract: Sustainable soil composites (SSC) were formulated by incorporating red earth with varying proportions of bagasse ash (BA) and hydrated lime to enhance geotechnical performance and promote the reuse of agro-industrial waste. Red earth served as the primary structural matrix, BA functioned as a pozzolanic filler, and lime acted as a chemical stabilizer. BA content ranged from 0% to 60%, identifying 10% as the optimum level for significant improvement, and lime …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1113–1122 Read article
-
A Strategy for Safer and More Resilient Industrial Construction
Abstract: This study investigates the effects of incorporating steel and polypropylene fibers into high-performance concrete (HPC) to enhance its mechanical behavior and ensure greater safety in industrial structures. The research focuses on HPC mixtures of M30, M35, and M40 grades reinforced with a combination of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers contribute to improved compressive and tensile strengths, while polypropylene fibers help control crack formation and dissipate energy …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 3, 2025 · pp. 1–6 Read article
-
Experimental Study on Waste Fibers in Concrete
Abstract: The rising expense of building, along with the progressive impact on the environment, has driven experts to adopt natural fibers such as coir and bamboo fibers and synthetic fibers such as plastic fibers for boosting concrete strength. Fibers are readily available at the test location, making them comparatively suitable as a reinforcing material in concrete. Concrete with fibers was compared to conventional concrete, and different strength parameters such as bending, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 190–201 Read article
-
Degradation of Building Materials by Corrosive Pollutants
Abstract: Fiber reinforced polymers (FRP) is used for the corrosion suppression of reinforced concrete structures (RCS). One of the main issues with reinforced concrete constructions is corrosion. It interacts with acids, alkalis and salts to produce disintegration in building materials components. Pollutants and effluents speed up disbanding inside and outside reinforced structures. Bio-wastes come in contact of building materials to develop miro and macro-organism and these organisms release acid substances to …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 15–24 Read article
-
Hybrid Composite Behavior of Concrete-Filled Steel Tube (CFST) Columns: Review of Collapse Mechanisms and Polymer-Based Enhancements
Abstract: Concrete-Filled Steel Tube (CFST) columns are an advanced hybrid composite system where the steel tube's confinement and the concrete core's load capacity work together to improve structural performance. While commonly used in civil engineering, CFSTs can also be understood within the framework of composite materials, similar to polymer- and fiber-reinforced composites, in which interactions between phases determine strength, ductility, and failure modes. This review compiles experimental and numerical research on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 78–97 Read article
-
Structural Health Monitoring of Polypropylene Fiber- Reinforced Composite Using Accelerometer Sensors
Abstract: This study explores the application of accelerometer sensors for structural health monitoring (SHM) in evaluating the performance of polypropylene fiber-reinforced composites (PFRC). Incorporating polypropylene fibers into concrete enhances its structural integrity and durability. However, accurately assessing PFRC behavior under various conditions is crucial for its practical application in construction. This research employs advanced accelerometer sensor technology for real-time monitoring and assessment of PFRC performance. Experimental investigations captured and analyzed the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 621–634 Read article
-
Experimental and Statical Analysis of Glass Fibre Reinforced Concrete
Abstract: During the most recent couple of decades, with the chance of fortifying the solid with fiber support to an incredible preferred position, the solid development field has encountered an expanded consideration. Various strands utilized are steel, manufactured, glass and common filaments, a portion of the planned advantages of filaments in concrete are improved split control and the chance of planning progressively thin structures. Glass fibre is a vital ingredient used …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 266–273 Read article
-
Numerical Investigation on Structural Behavior of RC Beam-Column Joints: Beam Weak in Shear
Abstract: This study presents a numerical investigation on structural performance of reinforced concrete (RC) beam-column joints (BCJ) with beam weak in shear subjected to cyclic loading. Retrofitting techniques are explored, utilizing Glass Fiber Reinforced Polymer (GFRP) for shear strengthening, in accordance with ductile detailing standards outlined in IS 13920:2016. The column and beam elements are designed following the guidelines of IS 456:2000. Various specimen scales, including full-scale, 2/3-scale, and 1/3-scale specimens, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 202–226 Read article
-
Enhanced Durability and Performance of Reinforced Concrete Beams through CFRP Wrapping: An Experimental Investigation
Abstract: Globally, maintaining and repairing aging reinforced concrete structures poses a significant challenge for the construction industry. Numerous structures built before modern earthquake-resistant design codes lack adequate seismic resilience. Additionally, evolving service requirements often necessitate strengthening existing structures to handle increased loads. While past research explored the effectiveness of various Fiber Reinforced Polymer (FRP) wrappings under specific conditions, limited studies have comprehensively compared the performance of Carbon Fiber Reinforced Polymer (CFRP) …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 37–49 Read article
-
Use of Geopolymer Composites for Controlling Structural Cracks
Abstract: A building’s safety and stability can be compromised by ignoring the potential structural issues indicated by occurring cracks in buildings. Extensive damage may cause over the period from unidentified cracks.Good quality concrete never cracks in normal service conditions unless high horizontal force is applied. Through the cracks, carbon dioxide is released into the concrete and speeds up carbonation throughout the cracks, thus reducing the structure usage. The materials which are …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 172–184 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Comparative Review of Innovations in Self-Compacting Concrete (SCC) Technologies
Abstract: Self-compacting concrete (SCC) is a revolutionary material in contemporary construction, with better workability and lower labor requirements without any sacrifice in strength or durability. The latest advances have been in terms of furthering its environmental and performance attributes by using different materials and methods. One of them is substituting ordinary Portland cement with high-volume fly ash and calcined calcium carbonate (BCC), cutting CO₂ emissions by as much as possible while …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 99–103 Read article