Search
157 articles for “fiber glass”
-
Investigate the Physical and Mechanical Properties of Short Coconut, Short Bamboo Fibers and Short Glass Fiber Reinforced Phenol Formaldehyde Composites
Abstract: In the field of research, the composite materials become the dominant materials from last forty years. Because of eco-friendly nature and sustainability, the researchers are using natural fibers in polymer composites to obtain good thermal, acoustic insulating properties, excellent formability and weight-resistance compared to traditional building materials. In the present research work, seven different fiber reinforcement Phenol formaldehyde matrix polymer composite i.e., short coconut, short bamboo and short glass fiber …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 53–61 Read article
-
The Examination of Design and Weight Optimization for a Light Motor Vehicle (LMV) Drive Shaft through the Utilization of a Composite Material Composed of Aluminum and Glass Fiber (Al + GF)
Abstract: Aluminum is primarily used in Metal Composites because of its lighter weight and higher strength. Glass fibers are wound around an aluminum shaft to create the composite. ANSYS results determine the relative amounts of aluminum and E-glass fiber in each shaft. The purpose of this study is to use a torsion test to evaluate the mechanical performance of a composite shaft composed of aluminum and glass fiber. The results are …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 3, 2024 · pp. 1–17 Read article
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Glass Fiber Layer Effect on Chemico-mechanical Properties of Light Cure Adhesive Systems
Abstract: Introduction: Orthodontic adhesives should have clinically acceptable shear and tensile bond strength to withstand masticatory forces and those generated by treatment mechanics. Mechanical properties of the adhesive, such as flexural modulus of elasticity, tensile strength, and compressive strength, are more heavily influenced by the resin matrix's Degree of cure (DC). Aim: The study compares the effect of the Glass fiber layer on Chemico-mechanical properties using three different light cure adhesive …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 1–9 Read article
-
Mechanical behaviour of Glass and Carbon fiber reinforced composites
Abstract: Components made with fiber reinforced composites are replacing components made with the conventional materials is due to holding superior mechanical properties and high specific strength with good corrosion resistance. These favourable attributes are not possible with a conventional monolithic material. Composites are developed with matrix and fibers as reinforcement material, the reinforcement fibers are playing a crucial role to attain a high strength property. Glass and carbon fibers are using …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 253–257 Read article
-
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl Ester Composites
Abstract: AbstractIn this paper, mechanical and tribological behavior of the composites under dry sliding wear of vinyl ester matrix reinforced with chopped strand mat (CSM)-E-glass fiber and fillers CaSO4 and CaCO3 sliding against smooth stainless steel counterface (Ra = 0.07 µm) using Taguchi experimental design has been presented. The effects of sliding velocity (1.57, 2.62 and 3.67 m/s), normal load (20, 40 and 60 N), filler content (0, 10 and 20 …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 13–31 Read article
-
Comparative Study of PSC Spun Pole using Higher Grade Concrete without and with Discontinuous Glass Fiber
Abstract: This experimental study was carried out on the prestressed concrete spun pole of length 13 m with and without use of anti-crack discontinuous glass fiber in high-strength concrete. The pole is having outer diameter at top and bottom as 206 mm and 379 mm respectively. The pole is having thickness 50~55 mm. The investigations were done to study the effect of use of high dispersion discontinuous glass fiber on deflection …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 1, 2014 · pp. 1–6 Read article
-
Analysis of unidirectional aligned Banana and Glass fiber reinforced polyester composite for tensile and flexural strength
Abstract: The hybrid composite can be set up by utilizing at least two fiber fortifications in the composite. Here the hybrid composite was set up by utilizing banana/glass fiber. In addition, fiber volume loading was 40%. The tensile test and flexural test were preceded according to ASTM D3039 and ASTM D790 separately. The results show that 5% treated fiber shows higher properties than non-treated fiber composite. NaOH treated banana fiber with …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 49–61 Read article
-
Mechanical Property Assessment of Hybrid Composite Laminates Composed of Jute Glass Fibers in Combination with Flax, Hemp, Sisal and Kenaf Fibers Using the Hand Layup Technique
Abstract: The present work compares the properties of various hybrid composite laminates manufactured using the hand layup technique and addresses their production process, based on glass fiber as the exterior layer and natural fibers (flax, hemp, kenaf, jute, and sisal) as interior layers, in an epoxy resin. Five stacking sequences A-GJJJJG, B-GFJJFG, C-GHJJHG, D-GKJJKG, and E-GJSSJG were used to prepare the test specimens. According to ASTM guidelines, experiments were performed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 103–113 Read article
-
Characterization of Glass Fiber/Epoxy Laminates Modified with MWCNT–Al₂O₃ Hybrid Nanofillers
Abstract: Enhancing the performance of fibre-reinforced polymer composites increasingly involves the integration of nanoscale additives that can improve strength, toughness, and overall durability. In the present investigation, woven E-glass/epoxy laminates were modified using a hybrid nanofiller system consisting of multi-walled carbon nanotubes (MWCNTs) and aluminium oxide (Al₂O₃) nanoparticles. The two nanomaterials were combined in a 2:4 proportion and introduced into the epoxy matrix at total loadings of 1%, 3%, and 5% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 350–368 Read article
-
Multi-Objective Optimization of Carbon-Glass Fiber Polymer Drilling Process Based on Fuzzy Grey Entropy Weighing Method
Abstract: In recent years, the machining characteristics of hybrid fiber polymer composites have garnered significant research attention due to their growing industrial applications. This study specifically focuses on the drilling of hybrid carbon-glass fiber reinforced (CGFR) epoxy composites, fabricated using the hand layup technique. The key machining characteristics evaluated in this drilling process include surface roughness and circularity error. The influence of critical drilling process parameters, such as spindle speed, drill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 100–112 Read article
-
Appealing Recent Trends of Glass/Carbon Fiber Replacing Conventional Materials
Abstract: Use of glass reinforced fiber plastic and carbon reinforced fiber plastic is well known in many industries and have significant impact for the industrial revolution. Researchers and manufactures across these industries are always searching for opportunities to use GFRP and CFRP for new components. Other industries are finding the prospects to use these material for possible future. Many properties of these materials are favored and attracting most of the industrial …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 1–6 Read article
-
Taguchi Analysis of the Thrust Force and Delamination in Drilling of Glass Fiber Reinforced Epoxy/Clay Nanocomposites
Abstract: AbstractComposites are replacing several materials due to their superior properties such as high strength to weight ratio, high stiffness to weight ratio, better impact characteristics, corrosion resistance and design flexibility. Drilling is often required to facilitate the assembly of the parts to get the final product. However, drilling induced damage affects the quality of the drilled components. The present investigation is an attempt to study the effect of the cutting …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 14–23 Read article
-
Optimization of Consolidation Temperature and Time for Self Reinforced High-density Polyethylene Composite
Abstract: Demand for high-density polyethylene (HDPE) for industrial production of domestic and commercial commodities has made it necessary to find ways of improving its mechanical properties. A viable approach towards this is the addition of reinforcements such as glass fibers. However, glass fiber reinforced composites suffer limitations because of reduced recyclability, great weight and difficult to thermo-form. In order to improve properties such as specific strength, stiffness and thermoformability of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 1, 2021 · pp. 19–26 Read article
-
UTM Testing and Comparison of Mechanical Properties of Composite Material Specimens Manufactured using Fused Deposition Modeling
Abstract: 3D printing has become a popular way for prototyping of components instead of conventional methods due to quickly results obtained and a variety in properties of process possible. In this paper our aim is to elaborate on differences between strength and other Mechanical properties of abs plastic, carbon fiber + abs and glass fiber + abs filament for additive manufacturing. For this procedure for this research filament has been acquired …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 3, 2020 · pp. 37–43 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
A brief review on Fiber reinforced polymer made by Fused Deposition Modeling
Abstract: Rapid prototyping (RP) techniques are used to quickly fabricate prototypes directly from CAD data using 3D printing or additive manufacturing. Fused Deposition Modeling (FDM) is one of the popular techniques of RP used to produce polymer parts, but due to limited mechanical properties of purely printed polymer using FDM there is a need developed to produce composites using FDM. The aim of this review article is to analyze the fiber …
Published in Journal of Production Research & Management · Vol. 8, Issue 1, 2018 · pp. 25–28 Read article
-
Thermal Management of Different Composites Materials Using a Convergent and Straight Vortex Tube
Abstract: The present study focuses on an in-depth and meticulous exploration into the intricate realm of thermal management in three distinct yet widely utilized composite materials—namely, Liquid Crystal Polymer (LCP) Composites, Glass Fiber Reinforced Polymers (GFRPs), and Aramid Fiber Composites (Kevlar). This investigation employs an innovative counter-flow vortex tube system, meticulously analyzing and comparing the thermal efficiency of these materials under different intake configurations. Specifically, two distinct geometrical intake designs—a straight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 252–266 Read article
-
Bonding Strength Characteristics of FRP Cylindrical Composites Under Hygrothermal Loading
Abstract: This study investigates the bonding strength characteristics and stress distribution patterns in fiber-reinforced polymer (FRP) cylindrical composites subjected to hygrothermal loading conditions. A four-phase cylindrical model incorporating AS-Graphite and S-Glass fibers with low modulus epoxy coating was analyzed under four distinct pressure loading conditions (25.984, 38.976, 77.953, and 155.906 MPa). Comprehensive stress analysis revealed significant variations in von-Mises stress, maximum principal stress, and minimum principal stress across fiber, coating, matrix, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 950–967 Read article
-
Mechanical Property Assessment of Hybrid Fiber Reinforced Composites Through Experimental Research
Abstract: Natural fibre reinforced composites are gradually taking the place of synthetic fibre composites due to its inexpensive cost, low density, and ease of supply. Furthermore, the addition of some waste materials to composites has remarkable properties that are attracting interest from a wide range of technical domains. Fibre reinforced with glass, carbon, and jute were used to generate hybrid composites. As a filler, different amounts of eggshell powder were mixed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 244–251 Read article