Search
40 articles for “epoxy resin characterization”
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Mechanical and Sustainable Enhancement of Epoxy Composites using Tamarind Seed Powder
Abstract: The investigation examines how tamarind seed powder affects epoxy-based materials for the development of waste-based useful products. The research examines the mechanical behavior of epoxy resin composites which contain tamarind seed powder in increasing percentages spanning from 10% to 40%. The team utilized the hand layup method to produce the composites which then fulfilled the ASTM guidelines for specimen fabrication for mechanical tests. The study examined fundamental mechanical parameters by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 797–806 Read article
-
Assessment of Sustainable Composite for UAV structural Application
Abstract: Now-a-days aligned with global mission the growth of Unmanned aerial vehicle (UAV) application is enormous in the field of agriculture, defence, surveying etc., This research work investigates the improvement in strength of polymer matrix composite material of adding epoxy polymer resin with novel bio fibers such as Tamarindus and Morinda. The composite material was fabricated by using hand-layup method later its mechanical properties are analysed by numerical method as well …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 359–377 Read article
-
Marine Algal Fiber Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Experimental Analysis and Predictive Modeling of Mechanical Behavior in Epoxy Composites Reinforced with Waste Tyre Rubber Particles
Abstract: The disposal of end-of-life tyres poses a significant environmental and resource challenge owing to their large volumes and non-biodegradable nature. In this work, we explore the incorporation of waste tyre rubber particles (WTRP) into an epoxy resin matrix to develop sustainable polymer composites and examine their mechanical behavior both experimentally and through predictive modelling. Composites with differing epoxy: WTRP ratios (80:20, 75:25, 70:30 wt.%) and varying rubber particle mesh sizes …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1754–1765 Read article
-
Fabrication of Natural Fibre Reinforced Polymer Composite by Hand Lay-Up Process
Abstract: The recent development in technologies has increased the usage of non-renewable resources during pro- duction due to remarkable properties. However, it has been a threat and unable to be replenished once used. In addition to this, natural fibre strengthens in a more significant way and it’s widely applicable in polymer composites materials. Furthermore, the use of plant fibres in polymer composites is due to its low cost and significant properties. …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 13–19 Read article
-
Development of Eco-friendly Glass Fiber Composites Embedded with Paddy Stubble for Sustainable Applications and Its Metallurgical Characterization
Abstract: The extreme rise in environmental challenges owing to agricultural activities, among which paddy stubble burning remains a huge concern. Burning about 15 million tons of paddy stubble leads to emissions discharge of various toxic pollutants and gases notably, nitrogen oxides, methane and carbon monoxide in large scale causing global air pollution and climate change. The study focuses on obtaining and preparing a paddy stubble powder and using it with glass …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 640–648 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Influence of the Modification of Resol Phenolics on the Properties of Glass and Cotton Fiber Laminates
Abstract: Fiber reinforced polymer (FRP) composite based on resol phenolics awaits special attention due to excellent inherent properties of the resol phenolics. In this study, modified resol phenolics by unsaturated polyester (UP) and epoxidised novolacs of simple phenol, o-cresol and p-cresol were used to fabricate glass and cotton FRPs. An overall enhancement of 25% in tensile strength and 40% in impact strength is achieved upon modification for both the modified laminates. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 239–255 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Improving the Mechanical and Interfacial Properties of Bhendi Fiber via Chemical Surface Treatments
Abstract: Because of its primary benefits—moderate strength and stiffness, low cost, and being a renewable, degradable, and ecologically friendly material—natural fibers are believed to have potential use as reinforcing agents in polymer composite materials. Due to their inherent hydrophilicity, they have a tendency to retain moisture, which can impair or soften the fibers' adhesion to the surrounding matrix. This can have an impact on the performance of composite materials used in …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 22–32 Read article
-
Comprehensive Study on the Mechanical And Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement technique. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Fabrication and Mechanical Characterization of Hybrid Natural Fiber Reinforced Composites using Ferromagnetic and Graphite Fillers
Abstract: The past few years have seen a lot of interest in the creation of hybrid natural fiber composites because of their lightweight properties, environmental friendliness and their potential use in structures. The hybrid composite laminates in the current study were produced by the hand lay-up process by blending the natural fibers with the functional filler materials. Three types of composite structures were created and these are Natural Composite Material (NCM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 498–511 Read article
-
Development and Evaluation of Hybrid Natural Fiber Composites
Abstract: Natural fiber based polymer composites are becoming more common because they are cheap, sustainable, and operate effectively across mechanical and environmental settings. Natural fibers (NFs) like bamboo and roselle are being used to strengthen polymer composites. They are being used in textiles, medical equipment construction, and car making. People are becoming more interested in these fibers because of the unique properties. Bamboo fiber is an effective option for reinforcement in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 908–915 Read article
-
A review of nanocomposite coatings for marine applications
Abstract: This paper reviews the performance and material characterization of nanocomposite coatings on the hydraulic pipelines of Ship A-Frame, which were corroded due to seawater exposure. Hydraulic pipe lines made of carbon steel face severe corrosion due to the highly corrosive nature of seawater with high salinity and microorganisms. The shipping industry utilizes organic and inorganic coatings to safeguard the hydraulic and seawater pipe lines of deck machines from marine pollution. …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 1, 2024 · pp. 1–9 Read article
-
Lightweight Composite Materials for Electric Vehicles (EVs) and Public and Private Transport
Abstract: The rapid expansion of the electric vehicle (EV) industry has intensified the demand for battery enclosures that are lightweight, durable, thermally stable, and environmentally sustainable. This study investigates the design and sustainable fabrication of hybrid nanocomposites for advanced EV battery housings. The proposed composite system combines carbon fiber, glass fiber, and graphene nanoplatelets within a bio-based epoxy matrix, resulting in superior mechanical strength, enhanced thermal stability, and excellent flame retardancy.A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 470–481 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Experimental Study on Effect of Recycled Epoxy Powder Reinforcement on Tensile Behavior of Acrylonitrile Butadiene Styrene
Abstract: Thermosetting plastic found wider application in the field of Aerospace, Aircraft, Wind Turbines, Marine and construction due to their long life, light weight and high strength. Among thermosets, epoxy is the major contributor. The world epoxy resin usage is almost 3.6 million tons in the year 2022 and it may cross 5.91 million tons by 2029. At their end of life most of it goes to land filling which leads …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 306–315 Read article
-
Mechanical Characteristic Analysis of Five-Layer Carbon-Carbon Composite Material
Abstract: The current study investigates the fabrication and mechanical strength of five-layer carbon-carbon composite. The strong five-layer carbon-carbon composite material with high strength and modulus is made of a raw material called precursors. The polyacrylonitrile (PAN) method is used in the fabrication of carbon fiber. The characteristics of the resulting carbon material depend on the composition and structure of the precursor. A sheet of 50 x 40 cm five-layer carbon-carbon composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 405–417 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article