Search
51 articles for “bond hardness”
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Improvement of mechanical properties for PMMA based Denture material
Abstract: Denture material properties can be improved by various fiber addition. The most often used denture materials are polymethyl methacrylate (PMMA) resins; nevertheless, they do not have a high flexural strength (FS). This investigation compared the mechanical characteristics of an injection-molded polyamide. Deflex, an additional injection-molded PMMA base material, SRIvocap, and a typical compression-molded PMMA (Meliodent). The flexural qualities (deflection, bending strength, and bending modulus) of 100 different denture base materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 155–165 Read article
-
A Review on Using Recycled Aggregate with Various Pozzolans in Geopolymer Concrete
Abstract: Reducing the use of natural resources is crucial to solving the global issue of CO2 emissions. Concrete can be produced sustainably by using recycled aggregates and geopolymer binders, which are environmentally benign alternatives to traditional components. Carbon footprints can be reduced by using these materials instead of ordinary Portland cement and natural aggregates. Among all the combinations, recycled coarse aggregates (RCA) and geopolymer concrete have garnered attention as a viable …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 486–493 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Machining-Induced Surface Integrity Optimization of High-Carbon Alloy Steel for Enhanced Polymer–Metal Composite Interface Performance
Abstract: The functional performance and structural reliability of polymer–metal hybrid composites are strongly influenced by the surface integrity of metallic substrates used for interfacial bonding and load transfer. In this context, machining-induced surface characteristics play a critical role in determining adhesion behavior, dimensional stability, and mechanical compatibility within composite architectures. The present study investigates the hard turning performance of a newly developed high-carbon alloy steel intended for composite-integrated structural applications, with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1531–1546 Read article
-
Review in Friction Stud Welding Of Aluminium to Steel
Abstract: The demand for friction stud welded aluminum/steel joints has increased in many significant applications including cryogenics, structural engineering, spacecraft, rocket fuel tanks and high vacuum chambers owing to their superior properties. In automobile engineering, there is a requirement to join a mild steel earthing pin which is in the shape of a stud to an aluminum car body. Aluminum and steel was considered to join using friction stud welding. This …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 3, 2021 · pp. 19–24 Read article
-
Tensile and Microstructural Behaviour of Friction Stir Welded AL7050 Hybrid Composites Reinforced with Multani Mitti and Cow Dung Ash
Abstract: The study examines Al7050 aluminum alloy composites made by stir casting and bonded by friction stir welding (FSW), supplemented with environmentally friendly Multani Mitti (MM) and cow dung ash (CDA). The study assesses the effects of different hybrid reinforcement contents (0–8 vol%) on the microstructural properties, hardness, and tensile behavior of the base alloy and its FSW joints. Tensile testing reveals an initial decline at 2% reinforcement but a notable …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 78–89 Read article
-
Improvement of Properties of Expansive Soil using Terrazyme
Abstract: Enzymatic emulsions contain enzymes that react with soil molecules to form a cementing bond that stabilizes the soil structure and reduces the soil’s affinity for water. When the bio-enzymes like Terrazyme, are mixed with soil they alter its engineering properties. When added to a soil, the enzymes increases the wetting and bonding capacity of the soil particles and improves the chemical bonding between soil particles and creating a more permanent …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 2, 2016 · pp. 1–6 Read article
-
Squeeze Casting of Hybrid Aluminum Matrix Composites: A Critical Review of Process Optimization, Reinforcement Strategies, and Performance Outcomes
Abstract: Increasing demand for lightweight, performance-oriented components in automotive, aerospace, and defense industries has driven advancements in squeeze casting, a hybrid technique merging forging and die-casting advantages to produce near-net-shape aluminum matrix composites (AMCs) with superior mechanical-tribological properties. This review critically examines the interplay of process parameters (e.g., squeeze pressure: 70–150 MPa, melt temperature: 650–800°C), reinforcement characteristics (volume fraction ≤10%, particle size: 10–71µm), and interfacial engineering strategies (flux-assisted bonding, ultrasonic dispersion) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 52–60 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1308–1322 Read article
-
Fundamental Analysis of Mid Cap Stocks of Indian in IT Sector
Abstract: Fundamental analysis is also needed for the classification of financial assets (stocks, bonds, and currencies) using economic indicators or valuation methods to determine their true value. The present study focuses on mid-cap stocks in the information technology (IT) sector of the Indian market, which includes sectors such as software development, hardware manufacturing, semiconductors, IT services, internet and e-commerce, telecommunications, cybersecurity, and cloud computing. Mid-cap stocks may offer a good mix …
Published in Current Trends in Information Technology · Vol. 15, Issue 1, 2025 · pp. 1–11 Read article
-
Development of Polymer–Micro-Aluminum Composites for Lightweight Engineering Applications
Abstract: This research focuses on the systematic development of polymer–micro aluminum composites, with polypropylene (PP) and epoxy selected as representative polymer matrices. Micro aluminum fillers in the range of 5–25 wt.% were incorporated through melt blending (PP) and casting (epoxy), and the resulting composites were evaluated in terms of mechanical performance, microstructural integrity, and crystalline characteristics. Tensile strength of the composites increased significantly, from 31 MPa in neat PP to 44 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1–12 Read article
-
Ab Initio Investigation on Half-Heusler Compounds CoVZ (Z = P, Bi, Sb, As): Understanding Structural, Electronic, Magnetic, and Elastic Behavior
Abstract: The structural, electrical, mechanical, and magnetic properties of Half-Heusler CoVZ (Z= P, Bi, Sb, and As) compounds have been studied using the ab initio method. Here, we use the full potential linearized augmented plane wave (FP-LAPW) method, which is implemented by WIEN2k. The compounds CoVZ (Z= P, Bi, Sb, and As) are near to the Fermi level as implemented in the WIEN2k algorithm, exhibiting 100% spin polarization with finite band …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 3, 2023 Read article
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article
-
Characterization of Polyurethane at Multiple Scales for Erosion Mechanisms Under Sand Particle Impact
Abstract: Thin polyurethane layers have been widely used as erosion-resistant coatings on helicopter rotor blades such as UH-60 Black Hawk and Eurocopter SA 315. Published research has mainly focused on empirical studies that relate the mechanical properties such as rebound resilience and hardness of polyurethane to solid particle erosion resistance. However, polyurethane possesses phase mixing at multiple scales and thus sand particle erosion resistance depends also on the microstructure and the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 1–13 Read article
-
Ce-TZP/Al2O3 Nanocomposites for Biomedical Implants
Abstract: Ceramic materials are widely used for biomedical applications because of their remarkable biological and mechanical properties. Titanium and titanium alloys are widely used for fabrication of dental implants. The foremost disadvantage of titanium is its dark greyish colour, negative delicate tissue states of the gingiva may prompt to compromised aesthetics. Anyway these days Zirconia implants were brought into dental implantology as an option in contrast to titanium implants. Zirconia seems …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 1–6 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article
-
Boron Nitride Unleashed: Revolutionary Insights into Its Superhard Phases and Machining Aptitude
Abstract: Exploration from the prehistoric era has proven steel to be a hard substance. According to research, the four main crystalline forms of boron nitride are graphitic, cubic, rhombohedral, and wurtzitic. Better hard materials for industrial processes have been provided by diamond, hard ceramic, and cermet in the process of developing the front of the script, which is descriptive. Turning, cutting, drilling, boring, and grinding of hard materials have been linked …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 2, 2024 · pp. 17–24 Read article