Search
96 articles for “Scanning Electron Microscopic (SEM) results”
-
Assessing the Mechanical, Structural and Thermal Performance of Boehmeria Nivea and Agave Sisalana Fiber Reinforced Polymer Composite by using Seashell Powder as a Filler Material
Abstract: Natural fiber composites have replaced plastics and have been used to the maximum extent. Hybridization of natural fibers with filler materials has achieved higher tensile, impact, and flexural strength compared to single fiber composites. In this research, the mechanical properties were investigated with the ramie and sisal hybrid fiber reinforced with seashell powder as filler material. Filler material can enhance the flexural property of the natural fiber. Hybrid composite plates …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–369 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Effects of Sub-Zero Temperatures on the Viscoelastic Properties of Magnetorheological Elastomer
Abstract: Magnetorheological elastomers (MREs) are smart materials capable of tuneable stiffness and damping under applied magnetic fields. This renders the material as a promising candidate for adaptive vibration control and semi-active engineering applications. While their behaviour at elevated temperatures has been widely explored, limited attention has been given to their performance under sub-zero conditions, which are critical for cold-environment applications. As this has become an important concern, the study investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 326–340 Read article
-
Experimental Study on Microstructural Evolution and Tensile Properties of Robotic Pulse MIG Welded Steel
Abstract: Robotic pulse Metal Inert Gas (MIG) welding has emerged as an advanced joining technique capable of producing superior weld quality through precise control of welding parameters. The present study evaluates the influence of welding parameters on the microstructural evolution and tensile properties of steel weldments fabricated using robotic pulse MIG welding and compares the results with conventional pulse MIG welding. Microstructural characterization was carried out using Scanning Electron Microscopy (SEM) …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 2, 2026 · pp. 40–52 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
PREPARATION AND CHARACTERIZATION OF ACTIVATED CARBON FROM ORANGE PEELS
Abstract: In this study, an attempt was made to establish Green Energy from agricultural waste (orange peels). Activated carbon (AC) produced from orange peels with chemical activation agent i.e. phosphoric acid (H3PO4) by carbonization activation process. The influences of the process, carbonization temperature and activation temperature (600 °C) for time 2 hour with H3PO4 of 1:1 ratio on the resulting activated carbon properties were evaluated. The AC is an excellent adsorbent …
Published in Journal of Catalyst & Catalysis · Vol. 5, Issue 1, 2018 · pp. 15–20 Read article
-
Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells
Abstract: AbstractParticulate-filled polymer composites are becoming quite attractive because of their low cost and wide applications. In this study, the effects of coconut shell (CS) and snail shell (SS) volume fractions (5–50 vol. %) on the thermal and mechanical properties of unsaturated polyester resin (UPR) composite are investigated. The results show that tensile strength, elongation at break, flexural strength, and hardness of the composite increase as filler concentration increases. However, impact …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 44–56 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
AI-Optimized Nano-Silica Reinforced PCM Composites for Predictive Solar-Thermal Energy Storage Networks
Abstract: This study presents an AI-optimized nano-silica reinforced polymer composite phase change material (PCM) for predictive solar-thermal energy storage networks. The proposed composite combines paraffin wax, high-density polyethylene (HDPE), and uniformly dispersed nano-silica particles to improve thermal conductivity, structural stability, leakage resistance, and long-term cycling performance. The composite was fabricated through melt blending and ultrasonication-assisted nanoparticle dispersion, followed by comprehensive morphological, chemical, thermal, and thermophysical characterization using scanning electron microscopy (SEM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Evaluation of Polysaccharide-Based Membranes for Transdermal Drug Delivery in Chronic Pain Management
Abstract: In order to improve treatment effectiveness and patient compliance, chronic pain management is still a major challenge in modern healthcare, requiring creative medication delivery methods. The potential of polysaccharide-based membranes for transdermal drug delivery is assessed in this work, with particular attention to chitosan, alginate, and hydroxypropyl methylcellulose (HPMC). Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were two characterization techniques used to assess the membranes' physical and chemical …
Published in International Journal of Membranes · Vol. 1, Issue 2, 2024 · pp. 28–38 Read article
-
Optimization of Dry sliding Wear Performance of pongamia oil cake filled Basalt Epoxy Composites by Taguchi Approach
Abstract: The study finds a possible utilization of natural pongamia oil cake for developing a new vista in the incorporation of the oily nature of natural waste material into polymer matrix composites. The woven basalt fibres were reinforced within an epoxy matrix incorporated with distinct weight percentages of pongamia oil cake (up to 6wt. %) and composite samples were composed by using resin transfer moulding process. The experimentation has been carried …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 8–16 Read article
-
Enhancing Fire Performance of Steel Reinforcement in RCC Structures: A Comprehensive Investigation
Abstract: The assessment, repair, and rehabilitation of fire-damaged structures have become crucial due to the rise in significant building fires.This particular field necessitates proficiency in various domains including concrete technology, material science and testing, structural engineering, and repair materials and processes. Researchers and developers are currently engaged in extensive efforts to tackle the challenges related to improving the fire resistance of steel reinforcement in reinforced concrete (RCC) structures. These endeavors involve …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 33–40 Read article
-
Electron beam irradiation studies of polyethylene maleic anhydride on their Chemical and Thermal properties.
Abstract: The electron beam (e-beam) irradiation effects on polyethylene maleic anhydride (MANPE) are investigated by spectroscopic and thermal methods. The MANPE irradiated with electron beam to a radiation dose of 30, 60 and 90 K Gy and the resultant changes in their chemical structure and thermal properties have been investigated by Electron spin resonance (ESR), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy …
Published in Journal of Polymer & Composites · Vol. 6, Issue 2, 2018 · pp. 17–30 Read article
-
Facile Synthesis of SnO2/g-C3N4 nanocomposite for the photocatalytic degradation of Methylene Blue dye under visible light irradiation
Abstract: This work reports the nanoscale samples of pure tin dioxide (SnO₂), graphitic carbon nitride (g-C₃N₄), and their composite (SnO₂/g-C₃N₄) were successfully synthesized using the co-precipitation technique. The synthesized materials were extensively analyzed using multiple characterization techniques such as Powder X-ray Diffraction (PXRD), High-Resolution Scanning Electron Microscopy (HR-SEM), Energy-Dispersive X-ray Spectroscopy (EDAX), Fourier Transform Infrared Spectroscopy (FTIR), UV-Visible Spectroscopy, and High-Resolution Transmission Electron Microscopy (HR-TEM). Results from PXRD and EDAX confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1835–1845 Read article
-
Analysis of Ageing and Degradation Behavior of Polyamide-12 for Sustainable Additive Manufacturing
Abstract: Additive Manufacturing (AM), particularly High-Speed Sintering (HSS), has emerged as a transformative technology capable of producing complex thermoplastic parts with high efficiency and minimal material waste. The HSS process involves selective deposition of radiation-absorbing ink followed by infrared heating to consolidate polymer powders-most commonly polyamide-12 (PA12). While PA12 is widely used due to its excellent thermal stability and mechanical properties, the sustainability of HSS strongly depends on the reuse of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 136–154 Read article
-
Utilization of Banana Peel Biopolymer as a Natural Coagulant for Wastewater Treatment: A Sustainable Approach to Bio-Composite Applications
Abstract: This study explores an eco-innovative approach to wastewater treatment by utilizing banana peel powder (BPP) as a sustainable, low-cost bio-coagulant. Although effective, conventional chemical coagulants like aluminum sulfate and synthetic polymers are often non-biodegradable, toxic, and economically burdensome, particularly in decentralized or low-resource settings. In contrast, BPP—an agro-waste material rich in bioactive functional groups such as hydroxyl, carboxyl, and phenolic compounds—provides a renewable and environmentally friendly alternative. To enhance its …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 106–115 Read article
-
Characterization of Polyurethane at Multiple Scales for Erosion Mechanisms Under Sand Particle Impact
Abstract: Thin polyurethane layers have been widely used as erosion-resistant coatings on helicopter rotor blades such as UH-60 Black Hawk and Eurocopter SA 315. Published research has mainly focused on empirical studies that relate the mechanical properties such as rebound resilience and hardness of polyurethane to solid particle erosion resistance. However, polyurethane possesses phase mixing at multiple scales and thus sand particle erosion resistance depends also on the microstructure and the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 1–13 Read article