Search
41 articles for “Phase change material (PCM)”
-
Review of Thermal Performance of Solar Air Heaters: Influence of Composite Materials and Advanced Thermal Storage Techniques
Abstract: Solar air heaters (SAHs) are essential devices for capturing solar energy and converting it into heat, finding applications in steam generation, refrigeration, agricultural drying, and space and water heating in residential and commercial environments. However, the thermal performance of SAHs is often limited by the low heat transfer coefficient of air and the absence of solar energy during nighttime, impacting efficiency and reliability. To address these challenges, this study explores …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 488–506 Read article
-
Thermal Performance of Concentrating Solar Panels
Abstract: The study shows a detailed analysis of the thermal performance of concentrating solar panels and the temperature increase due to concentrated solar radiation. This work proposes a configuration to reduce temperature rise, maintain good panel efficiency, and increase output power. The configuration is based on a sandwich structure including a phase change material (PCM), which absorbs the thermal energy excess generated by the concentrated solar radiation onto the PV panel. …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 1–10 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Importance of Phase Change Materials in Heat Transfer Fluids for Solar Heat Absorption
Abstract: Solar heat absorption involves capturing and storing solar energy for later use. Phase change materials play a crucial role in enhancing the efficiency of heat transfer fluids in solar thermal systems and are integral to the optimization of heat transfer fluids in solar thermal systems. Their ability to store and release thermal energy efficiently, regulate temperatures, and enhance overall system performance makes them a valuable component in the transition towards …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 2, 2023 · pp. 9–13 Read article
-
Analysis of Thermo-Mechanical Properties in Cement Mortar Using Synthesized Silicate Microencapsulation of Phase Change Materials by Sol-Gel Process
Abstract: This investigation delves into improving building thermal comfort using microencapsulated phase change materials (PCM@SiO2) in cement mortar. The encapsulation process, achieved via a sol-gel method, envelops PCM in a silicate shell Differential Scanning Calorimetry (DSC) and Fourier-Transform Infrared Spectroscopy (FTIR) were used to confirm the thermal properties and integrity of encapsulated PCM, which showed an encapsulation efficiency of 92.7% and a thermal storage capacity of 99.7%. The study involved the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 152–160 Read article
-
Cogeneration System in Concentrated Photovoltaic Panels
Abstract: This study analyses the behavior of hybrid systems composed of photovoltaic panels (PV) and phase-change materials (PCM) under solar concentration conditions, aiming to generate electric and thermal energy in water simultaneously (cogeneration). This work looks for system performance improvement while increasing the generated power and energy by the PV panel and the thermal system in unison. The study shows the increase in power and energy delivered by the prototype compared …
Published in Journal of Thermal Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 1–14 Read article
-
An Overview of Surface Coating Methodologies and Their Use in Technical Materials
Abstract: To safeguard the product or structure against chemical harm, a variety of procedures and materials can be applied in coating applications today. Nowadays, coatings are used extensively in manufacturing all over the world to increase efficiency and reduce expenses two factors that are essential to preserving the sector's profitability. Coated materials have greater strength compared to uncoated materials. A variety of materials, including bio glass, polymers, ceramics, strong and hard …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 19–35 Read article
-
Refrigeration System Performance and Energy Optimization in Food Preservation and Cold Chain Logistics
Abstract: A vital part of the food preservation sector, refrigeration guarantees the durability, security, and quality of perishable food items in the supply chain. The food cold chain, which encompasses the refrigeration systems used during storage, transportation, and distribution, is integral to maintaining food safety and minimizing waste. However, as the global demand for food increases and sustainability concerns rise, energy consumption in refrigeration systems presents a major challenge. Efficient refrigeration …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 1, 2025 · pp. 22–29 Read article
-
Polymer-Based Materials in Green and Sustainable Construction
Abstract: The escalating impacts of global warming, driven by greenhouse gas emissions, demand urgent action in the construction sector, which contributes over 40% of global CO₂ emissions. Smart buildings, designed to optimize energy use, water efficiency, and occupant comfort through automation and advanced materials, represent a transformative response to these challenges. The convergence of sustainability and urban development has spotlighted the need for green materials in smart building design. With buildings …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 42–48 Read article
-
Energy-Efficient Thermal Management: Advanced Cooling Techniques for Electronics, Automotive, and Aerospace Applications
Abstract: The growing demand for energy-efficient systems across diverse industrial sectors, including electronics, automotive, aerospace, and renewable energy, has elevated the importance of advanced thermal management techniques. Effective heat dissipation is critical not only for maintaining optimal operating conditions in electronic devices but also for enhancing the performance and reliability of broader energy and mechanical systems. Inadequate thermal management can compromise energy efficiency, reduce component lifespan, and increase environmental impact. This …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 1, 2025 · pp. 18–23 Read article
-
Comprehensive Thermal and Environmental Investigation of An Enhanced Evacuated Tube Solar Water Heater with Wavy Tape and Latent Heat Storage
Abstract: Evacuated tube solar collectors (ETSCs) are widely used for thermal energy applications; however, enhancing their thermal and exergetic efficiency remains a challenge. This study investigates performance enhancements through structural and material alterations. Four ETSC cases were tested experimentally, case-1: a standard ETSC, case-2: Wavy tape (WT) inserted ETSC, case-3: Phase change material (PCM) integrated ETSC, and case-4: Dual-Enhanced ETSC (PCM + WT). A binary eutectic PCM was utilized for latent …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 2, 2025 · pp. 1–16 Read article
-
Development of a Polymer-Encapsulated IoT-Based Sensor for Thermal and Electrical Protection of EV Batteries
Abstract: Electric Vehicles (EVs) mark a critical shift toward sustainable transportation, with Battery Management Systems (BMS) playing a vital role in ensuring battery safety, reliability, and efficiency. The proposed BMS in this project incorporates real-time charge monitoring, temperature sensing, and fire detection capabilities to address safety concerns associated with lithium-ion batteries. Key features include current and voltage tracking, State of Charge (SoC) estimation, fault detection, and a user-friendly LCD interface. By …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 582–591 Read article
-
Development of Bio-Based Smart Textiles with Temperature Adaptive and Self-Cleaning Properties
Abstract: This research explores the development of bio-based smart textiles that integrate both temperature-adaptive and self-cleaning properties, responding to the growing need for sustainable and functional innovations in the textile industry. Unlike conventional fabrics, smart textiles provide multifunctional responses to environmental stimuli such as heat, light, and moisture. The focus of this work is on combining renewable natural fibers, biodegradable polymers, and environmentally friendly additives to design textiles that are not …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 3, 2025 · pp. 1–7 Read article
-
Solar Thermal Energy Utilization: Design Innovations and Performance Enhancement Techniques
Abstract: The utilization of solar thermal energy has become increasingly significant in the pursuit of sustainable and low-carbon energy solutions. Unlike photovoltaic technologies that directly convert sunlight into electricity, solar thermal systems focus on harnessing solar radiation to generate heat, which can then be applied to diverse sectors such as water heating, space conditioning, industrial process heating, and power generation. In recent years, substantial research efforts have been directed toward enhancing …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 2, 2025 · pp. 1–5 Read article
-
Comparative Analysis of 3D-Printed and Molded Shape-Stabilized Phase Change Composites
Abstract: Thermal energy storage (TES) has become essential for efficiently storing and utilizing thermal energy across applications like industrial heating, power plants, batteries, medical devices, food preservation, and aerospace technology. Because of their high energy density, affordability, and environmental friendliness, phase change materials, or PCMs, are employed extensively. However, challenges like poor thermal conductivity and leakage limit their performance. To address these issues, 3D printing has emerged as a powerful tool …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 184–192 Read article
-
Stretchable Elastomer–Phase Change Composites for Passive Thermal Management in Wearable Electronics
Abstract: Elastomer-embedded phase change material (EPCM) composites are developed as stretchable, leakage-free, and electrically insulating thermal regulation layers for wearable electronics operating under stringent skin-safety requirements. The EPCM architecture comprises microencapsulated organic phase change materials (μPCM, 30–70 wt%) uniformly dispersed within soft elastomer matrices based on PDMS or SEBS-type thermoplastic elastomers, together with low loadings (1–8 wt%) of electrically insulating hexagonal boron nitride (h-BN) fillers to enhance lateral heat transport. Differential …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 30–41 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Prediction and Evaluation of Photovoltaic Panel Performance for Low Solar Radiation Concentration and Variable Topology
Abstract: This paper studies and analyzes the performance of photovoltaic (PV) panels for a flat-side mirror solar radiation low-concentration design. The system consists of two side mirrors concentrating surface that reflects solar radiation onto the PV panel area, increasing the solar radiation flux up to 177% regarding solar radiation peak at the Earth's surface. Three PV panel configurations are analyzed: conventional, a PV panel with attached phase change material (PV-PCM), and …
Published in Trends in Electrical Engineering · Vol. 14, Issue 3, 2024 · pp. 14–25 Read article
-
IoT-Enabled Polymer–Gel PCM Composites for Intelligent Thermal Management in Solar Facade Applications
Abstract: The present study investigates the development of a multifunctional polymer–gel phase change composite designed for solar façade applications with integrated real-time thermal monitoring capability. A crosslinked polyvinyl alcohol–borax matrix was employed as a three-dimensional polymer scaffold to encapsulate paraffin-based phase change material, ensuring leakage-free operation and structural integrity under repeated thermal cycling. Graphite nanoplatelets were incorporated as thermally conductive nano-fillers to enhance heat transfer through the polymer composite via percolation-driven …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 99–111 Read article
-
Stretchable Elastomer–PCM Composites with Bluetooth-Enabled Temperature Monitoring for Wearable Healthcare IoT Devices
Abstract: The rapid advancement of wearable healthcare technologies has created a growing demand for multifunctional polymer composites capable of simultaneously providing mechanical flexibility, thermal energy management, electrical conductivity, sensing capability, and wireless communication. In this study, a stretchable elastomer-based polymer composite integrated with a phase-change material and a Bluetooth Low Energy temperature monitoring system was developed for wearable healthcare Internet-of-Things applications. The polymer composite was fabricated using an Ecoflex silicone elastomer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 241–257 Read article