Search
133 articles for “Nano-crystal”
-
CuO/TiO2 Nanocomposites: Effect of Calcination on Photocatalytic Hydrogen Production
Abstract: Hydrothermally synthesized TiO2 nanorods were subjected to calcination from 350 to 550 °C and tested their catalytic performance for hydrogen (H2) production in aqueous glycerol solution under solar irradiation. High rate of H2 evolution ca.300 µmol.h−1.g−1cat was recorded with TiO2 nanorods calcined at 500 °C. The nanocomposites were prepared by varying Cu-loading 0.1 to 2.0 wt% and activated at 350 or 500 °C. About 25 folds enhancement in H2 production …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 2, 2014 · pp. 13–20 Read article
-
Chemical Synthesis of Zinc Oxide Nanoparticles and Characterization
Abstract: Chemical precipitation method was followed to synthesize zinc oxide nanoparticles. Zinc acetate and ethylene glycol were used in the preparation, and polyvinyl alcohol was also used along with zinc acetate to control the size and morphology. The precipitated particles were subjected to oxidation. The ZnO nanoparticles were characterized by analytical methods like XRD, FTIR, DLS, AFM, SEM and TEM. ZnO nanoparticles had crystal-like structures with size range of 6.17 to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 14–20 Read article
-
Facile Synthesis and Characterization of Cd²⁺ Doped NiAl₂O₄ Nanoparticles for Advanced Polymer Composite Integration
Abstract: Ni1-xCdxAl2O4, where 0 ≤ x ≤ 0.5, was successfully synthesized using the chemical co-precipitation technique, a scalable and cost-effective route suitable for composite material applications. X-ray diffraction (XRD) analysis revealed a crystalline cubic spinel structure for the resulting nanoparticles, with determined crystallite sizes ranging from 36 to 12 nm for NiAl2O4 and Cd-doped NiAl2O4. The respective band gaps for the materials were found to be 3.51 and 4.18 eV. Infrared …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 59–72 Read article
-
A Review on Quantum Dots and Their Bioimaging Applications
Abstract: Quantum dots are nanoscale semiconductor crystals engineered to emit highly intense, photo-stable luminescence with quantum yields reaching 90%. Structurally, they are synthesized as single-substance core types, hetero-structured core-shell architectures for enhanced stability, or blended alloys. They are further categorized by synthesis and functional traits into colloidal, magnetic, and highly fluorescent varieties, alongside specialized silicon and eco-friendly carbon-based variants derived from organic waste. Due to their exceptional optoelectronic properties, they are …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 2, 2026 · pp. 41–60 Read article
-
Photochemical Materials for Light-responsive Optical Switching: AI-optimized Design of Dynamic Visual Effects
Abstract: This paper presents an in-depth investigation into the design and behavior of photochemical materials that generate optical illusions and dynamic visual effects through light-induced molecular transformations. The study focuses on advanced photoresponsive compounds such as azobenzene and spiropyran derivatives, emphasizing their reversible optical transitions governed by photoisomerization, phase transitions, and photochromism in solid-state and polymeric matrices. Spectroscopic and kinetic analyses are employed to evaluate the influence of light wavelength, material …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 3, Issue 2, 2025 · pp. 13–27 Read article
-
Water Chestnut Stem-Derived Biochar Supported AgNPs/AC-CTS-PVA Composite Gel for Wastewater Treatment and Potent Antibacterial Performance
Abstract: In the present study, green and efficient Ag-NPs functionalized activated carbon/chitosan-polyvinyl alcohol (AgNPs/AC-CTS-PVA) composite gel was successfully synthesized using water chestnut stem-derived biochar for wastewater treatment and antibacterial applications. The composite was characterized by FTIR, XRD, SEM-EDX, and TGA analyses, confirming the successful incorporation of crystalline Ag nanoparticles within the polymeric matrix and improved thermal stability. The material was tested regarding the removal of the dye of methylene blue (MB) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1129–1144 Read article
-
Crystalline Materials: From Crystal Growth and Defect Engineering to Advanced Functional Applications
Abstract: Crystalline materials form the foundation of numerous modern technologies owing to their highly ordered atomic structures and exceptional physical, chemical, electrical, optical, and mechanical properties. Their periodic crystal lattices provide superior structural stability and enable precise control of electronic, thermal, and optical behavior, making them indispensable in microelectronics, photonics, energy storage, catalysis, aerospace, environmental remediation, and biomedical engineering. Rapid advances in crystal growth techniques, nanotechnology, and computational materials science have …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 2, 2026 · pp. 23–31 Read article
-
Effect of Zr, Fe Mono, Bimetallic Nanoparticles on the Electronic Properties of PVA/PVP Polymer blend
Abstract: AbstractThis paper describes the environmentally friendly production of polymer blend nanocomposites (PBNCs) made of polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP) and embedded with Zirconium(ZrO2), Iron (Fe2O3), and Zirconium-Iron (Zr-Fe), mono and bimetallic nanoparticles (NPs). FTIR spectroscopy was used to investigate the blend's development, interaction between polymers and nanoparticles, interactions between polymers and one another, and the impact of nanoparticles on interactions within PVA/PVP blend nanocomposites. With the addition of nanoparticles …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 72–80 Read article
-
Solid acidity of MoO3 synthesized by solution combustion method and acetalization of formaldehyde using it
Abstract: MoO 3 nanoparticles were synthesized via solution combustion approach. Ammonium nitrate was used as oxidant and ammonium molybdate as fuel in combustion reaction. XRD, FTIR and Raman spectroscopy results showed that MoO 3 nanoparticles were successfully synthesized by the solution combustion reaction. The SEM analysis showed that synthesized MoO 3 nanoparticles have rod-like shape with width and thickness of 50-200nm and length of 0.2-1μm, respectively. The XRD pattern and morphology …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 3, 2025 · pp. 01–09 Read article
-
Role of Bimetallic (Ag-Cu) Nanoparticles on the Structural Properties of PVA/PVP Blend Green Nanocomposites
Abstract: This study reports the green synthesis of polymer blend nanocomposites of Polyvinyl alcohol (PVA) and Poly vinylpyrrolidone (PVP) embedded with Silver (Ag), Copper (Cu) mono metallic and Silver-Copper (Ag-Cu) bimetallic nanoparticles (NPs), generated using plant mediated solution casting method. The formation of blend, polymer-polymer interactions, interaction between polymer and nanoparticles and role of the nanoparticles on the interactions among PVA/PVP blend nanocomposites were studies by FTIR spectroscopy. The crystallinity of …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 11–19 Read article
-
Solar-Responsive Photo-Thermal Polymer Composites with Carbon Nanostructures for On-Demand Water Purification
Abstract: The development of solar-responsive polymer nanocomposites offers a sustainable pathway for water purification. In this work, polyvinyl alcohol (PVA) films reinforced with graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) were fabricated and systematically investigated for their mechanical, thermal, viscoelastic, and thermal transport properties. Neat PVA displayed moderate tensile strength (~38 MPa) and high elongation (~165%), whereas 1.0 wt% nanofiller loading enhanced tensile strength to ~52 MPa and modulus to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 199–209 Read article
-
A Strategy of Nano-Calcite Fillers for Enhancing the Mechanical and Thermal Properties of Polypropylene Polymers
Abstract: Particulate polymer composites have gained popularity because of their many uses. For some, using high loadings to achieve desired attributes without compromising the material's mechanical properties or restricting its processability is desirable. It is possible to use surface active agents to improve characteristics and increase solid loading. Interface characteristics in highly packed particulate composites based on nano-calcite (nano-calcium carbonate) and polypropylene as a binder are the focus of the current …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 1, 2025 · pp. 20–29 Read article
-
Green Synthesis of Silver Nanoparticles Using Ficus Religiosa Linn Leaf Extract
Abstract: Nanotechnology is always a promising field for many new technological innovations. Turning Chemical process green also gains more attention of researchers due to high environmental concern. The process that involves ecofriendly procedures, use of less toxic solvents, less toxic byproducts, use of cheaper raw materials are all becoming ever increase in demand for current research scenario. Plants especially those having medicinal properties are beneficial for synthesizing nanoparticles as it will …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 2, 2021 · pp. 45–52 Read article
-
Crystal Engineering Strategies for Tailoring Mechanical Properties of Structural Materials
Abstract: Crystal engineering has emerged as a promising approach for designing materials with tailored mechanical properties, enabling advancements in various fields such as aerospace, automotive, and construction. This review examines the diverse strategies employed in crystal engineering to manipulate the mechanical behavior of structural materials. One key strategy involves controlling the crystal structure at the atomic level through techniques such as alloying, doping, and phase transformations. Alloying introduces foreign atoms into …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 1, 2024 · pp. 01–06 Read article
-
Comprehensive Review of the Fundamental and Functional Properties of Crystalline Materials
Abstract: Crystalline materials, characterized by their highly ordered atomic arrangements, serve as the backbone of modern engineering and technology. This review provides a detailed examination of their diverse properties, categorized into mechanical, thermal, electrical, and optical domains. We analyze fundamental mechanical parameters such as the elastic modulus, yield strength, and fracture toughness, alongside functional behaviors like fatigue and creep. The discussion extends to thermal transport and expansion, electrical conductivity and resistivity, …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 1, 2026 · pp. 20–24 Read article
-
Gamma Irradiation Effects on Structural and Optical Properties of PVA/Al₂O₃/TiC Polymer Nanocomposites for Optoelectronic Applications
Abstract: PVA/TiC/Al2O3 nanocomposite (PTA) films were successfully prepared via the solution casting method. The impact of high-dose gamma (γ) irradiation (30 kGy) on the structural and optical properties of PVA/TiC/Al2O3 nanocomposites was systematically explored using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and UV–Visible spectroscopy. XRD analysis confirmed the semi-crystalline nature of the nanocomposites, which was found to decrease upon incorporation of Al₂O₃ nanoparticles and exposure to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 717–729 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article
-
Structural, Optical, Surface, and Gas-Sensing Properties of rGO/Sn1–xZnxO₂ Nanocomposites
Abstract: rGO/Sn₁–ₓZnₓO₂ nanocomposites with x = 0.00–0.75 were synthesized by sol–gel auto-combustion followed by wet impregnation with reduced graphene oxide. The adopted synthesis route enabled homogeneous Zn incorporation into the SnO₂ matrix and uniform distribution of rGO, leading to improved structural integrity and interfacial contact between the two components. XRD confirmed a dominant tetragonal cassiterite SnO₂ structure, while FTIR, FESEM, EDS, UV–visible, and BET analyses verified oxide–rGO coupling, Zn-dependent structural modification, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 429–452 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Nanocomposites of Polyethylene-Closite 20A: Preparation and Characteristics
Abstract: Low-density polyethylene/closite 20A nanocomposites with different organoclay contents were made in the current study by a melt mixing technique with two different compatibilizers of varying contents: low molecular weight oxidized polyethylene and low molecular weight trimethoxysilyl modified polybutadiene. The inclusion of compatibilizers and concentrations of organoclay were analyzed in relation to the mechanical and thermal properties of the nanocomposites. The dispersibility of the silicate clay in the nanocomposites was investigated …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 1, 2025 · pp. 01–12 Read article