Search
42 articles for “Microstrip Technology”
-
Design of Rectangular Microstrip Patch Antenna for WBAN Application
Abstract: AbstractThis paper presents a microstrip patch antenna with frequency of 2.47 GHz with substrate of FR4 Epoxy with relative permittivity of 4.4. Due to very low cost and excellent mechanical properties it is ideal for wide range of electronic component applications. Here we have cut four rectangular corners on the patch. We have first cut one corner then we found the return loss as -15.6db and gain as 5.679.To improve …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 1, 2020 · pp. 25–33 Read article
-
Analysis and Design of Microstrip Antenna for Applications in Energy Harvesting
Abstract: AbstractThis paper focuses on design and analysis of wide band antenna for the use of energy harvesting. The design parameter for achieving optimal operation of the antenna is also analyzed. The presented antenna design has been simulated by IE3D software which is suitable for wide band applications at resonant frequency 3.23 and 4.25 GHz.Keywords: Wireless communication, LC filter, RF power, Schottky diodeCite this ArticleHira Sultan, Neha Sen, Vinod Kumar Singh, …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 3, 2017 · pp. 1–4 Read article
-
Wi-Fi Shaped Quad-band Microstrip Antenna for RF Energy Harvesting Applications
Abstract: AbstractIn this paper, author proposed a Wi-Fi shaped microstrip antenna for the RF energy harvesting applications. The proposed antenna is operating at the frequencies 0.9, 1.7, 1.9 & 2.4 GHz. The antenna radiates at the quad-band frequency having an application in GSM Band and Wi-Fi Bands. The antenna consists of four different strips which correspond to each frequency in the result. The co-axial probe is connected from the side of …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 3, 2018 · pp. 11–19 Read article
-
Review on Microstrip Patch for Detection of Breast Cancer
Abstract: AbstractAs the number of breast cancer patients are increasing , we need more reliable method that can helps in detecting the type of cancer in early stages which will lead to save the patients’ lives as the earlier tumor is detected the higher chance for recovery. Therefore the aim of our project is to design compact low profile wearable antenna that is used for early cancer detection with low cost. …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 1, 2020 · pp. 34–37 Read article
-
Bendable Microstrip Antenna with Partial Ground for Textile Related Applications
Abstract: AbstractIn this article, the bendable microstrip antenna with the partial ground plane is proposed. The anticipated antenna is made of jeans substrate and applicable in the frequency range 1.90 GHz to 6.81 GHz with a bandwidth of 112.74 %. There is comparison reference antenna and anticipated antenna. The proposed bendable wearable antenna is used in the textile related application.Keywords: Bendable Microstrip Antenna, CST software, Jeans Substrate Cite this ArticleDeepa Rani, …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 17–21 Read article
-
Modification of Microstrip Antenna by “Hexagonal Shaped” Metamaterial for Wireless Applications
Abstract: AbstractIn this proposed paper, a split ring “Hexagonal Shaped” metamaterial structure is used to modify the factors of antenna. The compact patch antennas (CPA) are directive and their size is small in surroundings. These antennas are sources to achieve the recent requirements. These antennas are desired to be possessing less return loss, better directivity, higher bandwidth and compact size at the operating frequency when used in any communicating operation. This …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 3, 2018 · pp. 25–29 Read article
-
Tri-Band Edge-Cut Rectangular Microstrip Patch Antenna on Composite Substrate for RF Energy Harvesting in IoT Networks
Abstract: The increasing use of Internet of Things devices underscores the pressing need for sustainable energy solutions, since traditional batteries necessitate regular replacement and constrain scalability. Radio frequency energy harvesting is a viable option; nonetheless, antenna design continues to provide a significant problem owing to the requirements for compactness, efficiency, and multi-band functionality. A hybrid composite substrate configuration combining FR4 (εr = 4.3) and RT Duroid (εr = 2.2) is employed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–883 Read article
-
Design and Analysis of Multi Band Patch with Enhanced Bandwidth
Abstract: In this article, a novel lower edge defected multi-band patch with modified ground structure (or Defected Ground Structure-DGS) with enhanced bandwidth has been presented. The bandwidth can be enhanced by defecting the partial ground and by arc truncation of lower edges of the patch. The antenna was converted into multi-band by defecting the lower corners. The antenna is resonating at multiple bands i.e. 3.7 GHz, 7.87 (~7.9) GHz, 12.19 (~12.2) …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 3, 2020 · pp. 1–8 Read article
-
High-Gain Microstrip Patch Antenna for Satellite and Radar Applications
Abstract: The growing demand for high-speed wireless communication, satellite connectivity, and advanced radar systems has increased the necessity for compact and high-performance antenna designs. This study presents the design and analysis of a high-gain microstrip patch antenna intended for satellite and radar applications operating in the microwave frequency range. The proposed antenna structure is developed using a low-loss dielectric substrate to enhance radiation efficiency, bandwidth, and gain characteristics while maintaining a …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 2, 2026 Read article
-
The Design and Analysis of a High Bandwidth Patch Antenna Loaded with Double-L shaped Parasitic and Super-Strate Components
Abstract: A patch antenna having parasitic components in the shape of a double-L. It is shown how to make a directional slot antenna using a parasitic patch and a windowed superstrate. The recommended antenna may readily obtain high-gain properties due to its composition. The suggested antenna's impedance bandwidth has been measured. Internet of Things (IoT) apps to make their data more accessible, wireless communication technology integration is required. This work proposes …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 10, Issue 2, 2023 · pp. 1–13 Read article
-
RF Energy Harvesting from Wi-Fi Router in 2.45 GHz ISM Band
Abstract: In this paper, an experimental RF energy harvesting system using rectifying antenna (rectenna) to harvest ambient energy from Wi-Fi at 2.45 GHz is presented. The proposed circuit is a combination of RMPA, followed by a third order stepped impedance low-pass filter, matching network and rectifier using Schottky diode for microwave (RF) to DC conversion. The performance of the rectenna is simulated by electromagnetic simulator computer simulation technology (CST) microwave studio. …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 21–25 Read article
-
Analysis and Design of Coaxial Fed Microstrip Antenna on Multilayer substrate at Terahertz Frequency
Abstract: AbstractThe paper presents the performance of an antenna on a three-layered substrate material analyzed to enhance the electrical parameters such as bandwidth and gain of a microstrip antenna. A regular rectangular microstrip antenna design has been updated to a planar parabolic horn design for improving bandwidth to up to 30 times provided by a rectangular patch. The design has been simulated at 0.6 THz resonant frequency using Keysight’s ADS (Advanced …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 3, 2017 · pp. 11–14 Read article
-
Design and Analysis of Microstrip Band Reject Filter with Modified Rectangular and Hexagonal Shape Ground Structure
Abstract: In this proposed paper, the performance of band stop filter with modified ground structure is examined; the modified ground structure includes four rectangular and a hexagonal etched shapes in ground plane. Parameters of the proposed design were calculated at the cut off frequencies of f1=1.16 GHz, f2=1.89 GHz and also proposed designs having substrate height of 1.6 mm, loss tangent of 0.02 and dielectric constant of 4.4. Results are calculated …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 2, 2017 · pp. 1–5 Read article
-
Design and Analysis of Microstrip Band Stop Filter with Modified Circle and Dumbbell Shape Ground Structure
Abstract: In this proposed paper the performance of Band stop filter with modified ground structure is analyzed in this specific work; the modified ground structure includes a circle and dumbbell etched shapes in ground plane. Parameters of the proposed configuration were calculated at the cut off frequencies of f1=1 GHz, f2=1.62GHz and also proposed designs having substrate height of 1.6 mm, loss tangent of 0.02 and dielectric constant of 4.4. Results …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 26–31 Read article
-
Design of Microstrip Stepped Impedance Low Pass Filter for S-Band Application Using Insertion Loss Method
Abstract: Day by day the requirement of microstrip filter is increasing because of their size, low cost and narrow bandwidth .this paper elaborates the design of stepped impedance LPF by using insertion loss method using Richard’s transformation and Kuroda’s identities. Filter works at 2.65 GHz; the used material is FR4 lossy with dielectric constant 4.3 with a substrate thickness of 1.6 mm for n=3. The designing is done with the help …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 1–5 Read article
-
Design of UWB Microwave Filter Using Quarter Wavelength Short-Circuited Stub
Abstract: UWB technology has progressed a lot in recent years for high speed wireless communications and other applications which need higher data rate and wider bandwidth. In this paper UWB bandpass filter is designed using quarter wavelength (λ0/4) short circuited stubs to improve the performance of UWB. Designed UWB filter gives higher performance and lower insertion loss in UWB spectrum. 5th order UWB bandpass filter is designed using CST MWS simulation …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 32–36 Read article
-
Design and Performance Analysis of Microwave Filters and Resonators for High-Frequency Systems
Abstract: Microwave filters and resonators are fundamental components in high-frequency systems, playing a crucial role in signal selection, interference suppression, and frequency stabilization. This review presents a detailed analysis of design methodologies and performance characteristics of microwave filters and resonators used in modern communication and radar applications. Various filter topologies, including low-pass, high- pass, band-pass, and band-stop configurations, are examined with respect to their frequency response, insertion loss, selectivity, and bandwidth. …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 1, 2026 · pp. 8–16 Read article
-
Patch Antenna by using Tunable Metamaterial for Dual Band Application
Abstract: AbstractIn this paper, a novel compact microstrip antenna, designed on FR4 substrate, is proposed. Here, a compact Square patch antenna is designed in such a way that a layer of metal between the patch load and the radiating patch moreover, the ground which makes the antenna operate at a lower frequency and antenna at 2.418 GHz with the directivity and gain is 6.58 6dB and 2.935dB. The Tunable metamaterial is …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 3, 2018 · pp. 20–24 Read article
-
Intelligent Design Approaches in Microwave Engineering Using Machine Learning Techniques
Abstract: In microwave engineering, machine learning (ML) has become a potent technology allowing quicker design cycles, improved modelling accuracy, and automatic optimisation of complicated systems. Recent developments in the use of ML methods to microwave components and systems, including antennas, filters, and high-frequency circuits, are summarised in this study. In the framework of electromagnetic simulation, surrogate modelling, and parameter extraction, supervised and unsupervised learning algorithms are addressed. Moreover, the study looked …
Published in Journal of Microwave Engineering and Technologies · Vol. 12, Issue 2, 2025 · pp. 31–38 Read article
-
Ultra-Wideband (UWB) Planar Monopole Antenna Array for Indoor Multimedia Devices
Abstract: AbstractA UWB planar monopole antenna array for indoor multimedia devices is presented. The base work of antenna includes a modified rectangular monopole to cover entire UWB (3.1 to 10.6GHz) and fed with a 50Ω microstrip line. The proposed antenna array is having a compact size of (80*30*1.6mm3) with a spacing of 0.5*lambda between two elements. To exhibit a wider bandwidth, a rectangular cut in the ground plane has been introduced …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 2, 2018 · pp. 28–35 Read article