Search
942 articles for “Mechanical performance”
-
AI-Enabled Optimization of Additively Manufactured Composite Materials for Enhanced Mechanical and Thermal Performance
Abstract: This paper discusses the optimization of multi-objective optimization of enhanced coupling of heat and mechanical properties of 3D printed polymer composite materials by artificial intelligence (AI), as a component of a multi-objective optimization framework. It aims at development of nonlinear printing parameters and material properties relationships to achieve maximum tensile strength and thermal conductivity in polymer composites produced through fused deposition modeling (FDM). Short carbon fiber reinforcement was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 867–891 Read article
-
Comparative Study of the Mechanical and Durability Performance of Interlocking Concrete Pavement Blocks
Abstract: Interlocking concrete pavement blocks (ICPBs) have emerged as a durable, modular, and sustainable alternative to traditional pavement systems. Their performance depends heavily on the mechanical characteristics of the concrete mix, block geometry, compaction technique, and curing conditions. This review compiles and analyzes research findings related to the strength, durability, structural behavior, and long-term performance of ICPBs produced using traditional and modified concrete mixes. Key parameters evaluated include compressive strength, split …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 24–30 Read article
-
An Experimental Investigation of High Performance by Using Steel and Polypropylene Fibres
Abstract: This study explores the feasibility of partially substituting conventional cement in concrete with steel and polypropylene fibers to improve mechanical performance and introduce alternative composite materials. Concrete cube specimens measuring 150 × 150 × 150 mm were cast with varying mix designs corresponding to M20 and M25 grades. The experimental program was executed in two distinct phases. In Phase I, control mixes of M20 and M25 grade concrete were prepared …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 7–13 Read article
-
Additive Manufacturing of Polymer-Based Advanced Composites: Mechanical Properties and Performance Evaluation
Abstract: Fabrication of large-scale and geometrically complex polymer-based advanced composites via fused deposition modelling (FDM) has been shown to be a promising technology for the production of such materials, however there are challenges in using short carbon fibre-reinforced polylactic acid (CF-PLA) which include obtaining high mechanical performance and maintaining dimensional accuracy with dynamic robot motion and complex interactions occurring between process parameters. The conventional approaches are mostly static feed rates or …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1335 Read article
-
Copper Sulfide Semiconducting Nanoparticles for Antibacterial Applications: Synthesis Strategies, Mechanisms and Performance – A Review
Abstract: Copper sulfide nanoparticles (CuS NPs) have drawn growing attention as a next-generation antibacterial platform, owing to their tunable structural, optical, and catalytic properties. This review consolidates current evidence on CuS NP synthesis, mechanisms, and antibacterial performance, comparing chemical and green synthesis routes alongside the effects of morphology, doping, and surface modification. Mechanistically, CuS NPs act through several overlapping pathways, including reactive oxygen species generation, bacterial membrane disruption, ion release, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Recent Advances in Hybrid Polymer–Cement Composites: Interfacial Engineering, Self-Curing Mechanisms, and Microstructural Performance
Abstract: The increasing demand for high-performance polymer-modified cementitious composites has stimulated extensive research into hybrid self-curing composite systems with engineered aggregate phases. Self-curing hybrid polymer–cement composite systems, using recycled aggregates, constitute one of the solutions proposed by researchers to overcome problems related to moisture loss during the curing process, shrinkage, cracking, and the limited amount of natural aggregate available. This critical review provides an overview of recent developments concerning the production, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
POLYMER AND COMPOSITE-BASED GEOSYNTHETIC REINFORCEMENTS FOR SEISMIC STABILITY OF SOIL RETAINING STRUCTURES: MATERIALS, MECHANICS, AND PERFORMANCE REVIEW
Abstract: Geosynthetic materials based on polymer and composites have become important items for the structural performance and seismic resilience of the reinforced soil retaining systems. Mechanically stabilized earth walls in recent geotechnical engineering practice are increasingly based on enhanced polymeric reinforcements for enhanced tensile strength, durability, flexibility, and energy dissipation under dynamic loading. High-density polyethylene, polypropylene, polyester, and fiber-reinforced polymer composites are usually used. The present review focus on the recent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Comprehensive Introduction: Epoxy and Polyurethane Floor Coatings—A Critical Evaluation for Modern Industrial Applications
Abstract: Industrial flooring systems are essential for ensuring operational durability, safety, and longevity in demanding environments. Epoxy and polyurethane (PU) coatings represent two predominant technologies, each offering distinct mechanical, chemical, and aesthetic profiles tailored to specific performance requirements. Epoxy systems, formed through the crosslinking of bisphenol-A-based resins with amine hardeners, excel in high-strength, chemically aggressive settings due to their superior hardness, adhesion, and chemical inertness. In contrast, PU coatings, synthesized from …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 14–23 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Enhancing Mechanical and Thermal Performance of M30 Concrete with Carbon Fibre Reinforcement
Abstract: This study examines the influence of carbon fibre incorporation on the mechanical properties of M30-grade concrete. A series of experimental investigations were conducted to assess the effects of varying carbon fibre content on compressive, split tensile, and flexural strengths. The results indicate a significant enhancement in mechanical performance with the inclusion of carbon fibres, with the optimum fibre dosage identified as 0.75%. At this content, the concrete achieved a peak …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 252–260 Read article
-
Corn Husk Fiber–Reinforced PLA Biocomposites: Mechanical, Thermal, and Biodegradation Performance
Abstract: The increasing environmental burden caused by conventional petroleum-based plastics has driven significant interest in the development of sustainable polymer composites reinforced with renewable natural fibers. In the present work, corn husk fiber (CHF), an agricultural waste by-product, was utilized as a reinforcing phase in a polylactic acid (PLA) matrix to fabricate eco-friendly biocomposites. Composite samples with varying fiber loadings (0–40 wt.%) were produced through twin-screw melt blending followed by compression …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 312–327 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Experimental Investigation of Polymer Composite-Based Protective Structures for Mitigating Crash-Induced Mechanical Abuse in Lithium-Ion Batteries
Abstract: The objective of this paper is to determine the effectiveness of using polymer composite protective structures to protect against the mechanical abuses associated with crash impacts that affect lithium ion batteries in terms of their structural integrity and their overall safety. In addition to their use in electric vehicles, lithium ion batteries are also being increasingly used in renewable energy based energy storage systems because they have high energy densities, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Fabrication and Mechanical Characterization of Hybrid Natural Fiber Reinforced Composites using Ferromagnetic and Graphite Fillers
Abstract: The past few years have seen a lot of interest in the creation of hybrid natural fiber composites because of their lightweight properties, environmental friendliness and their potential use in structures. The hybrid composite laminates in the current study were produced by the hand lay-up process by blending the natural fibers with the functional filler materials. Three types of composite structures were created and these are Natural Composite Material (NCM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 498–511 Read article
-
Predictive Modeling and Optimization of Tensile and Flexural Strength in FDM 3D Printing Using Decision Trees and Bayesian Optimization.
Abstract: This research investigates predictive modelling and optimization technique for the tensile and flexural strength of PlA (Poly Lactic Acid) in Fused Deposition Modelling (FDM) 3D printing. Employing Decision Trees and Bayesian Optimization enhances comprehension and control of 3D printing process. Precise model predicts PLA material properties based on input parameters. Methodology involves rigorous data preprocessing, encompassing, cleaning, transformation, and normalization. Hyperparameter optimization via grid search systematically explores configurations, optimizing model …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 203–214 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Mechanical and Environmental Performance of Curaua Fiber Composites: A Sustainable Alternative to Wood and PVC
Abstract: This study examines the mechanical behavior of curaua fiber composites, comparing their performance to other materials like wood and PVC. Curaua fibers, sourced from the Brazilian Amazon, demonstrate superior mechanical properties, making them a promising alternative for sustainable composite materials. The composites were fabricated using various methods and subjected to tensile, flexural, and impact tests. Results show that curaua fibers exhibit an average tensile strength of 30.7 MPa, outperforming wood …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 467–477 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article