Search
165 articles for “Compressive Test”
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Composite Behavior of Bagasse Ash Stabilized Expansive Soil with Sodium Benzophenone Under Curing Conditions
Abstract: The present investigation examines the development of a hybrid composite using Black Cotton (BC) soil, Bagasse Ash (BA), and Sodium Benzophenone (SBP) as performance-enhancing elements. Different ratios of BA, a silica-rich agro-industrial by-product, were added to improve pozzolanic reactivity and particle size distribution (0%, 6%, and 12%). SBP was added in the range of 0–0.6% as a compatibilizer in order to enhance interfacial adhesion, particle cohesivity and moisture-assisted deterioration resistance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1134–1146 Read article
-
Performance of Sisal Fiber Concrete Using Fly Ash and Silica Fume Enhancements
Abstract: The construction industry has advanced significantly in constructing innovative structures using diverse materials. Various waste materials such as fly ash, sawdust, and residues of natural fibers have been utilized in the construction industry. Addressing these concerns requires exploring low-cost, environmentally friendly, and sustainable materials. This paper aims to investigate mixing silica fume, fly ash, and sisal fiber into concrete to address waste disposal and global warming issues while creating stronger …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 63–74 Read article
-
Enhancing Compressive Strength of M25 Grade Concrete Using Ceramic Tiles Waste and Waste Fiber Metal: A Path Toward Sustainable Construction
Abstract: This study explores the use of Ceramic Tiles Waste and Waste Fiber Metal as partial replacements in M25 grade concrete, focusing on their impact on compressive strength. Various combinations of waste materials were tested to determine the optimal mix proportions. Compressive strength tests were conducted on concrete cubes incorporating 0.30%, 0.40%, and 0.50% Waste Fiber Metal with varying percentages of Ceramic Tiles Waste ranging from 20% to 50%. The results …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 13–19 Read article
-
Advancements in Metal-Plastic Hybrid Structures: Experimental Analysis and Design Optimization of 3D-Printed Honeycomb Frameworks
Abstract: The exploration of metal-plastic hybrid structures has gained significant attention due to their potential for lightweight, high-strength applications across industries such as aerospace, automotive, and construction. This study investigates the experimental and design enhancements of a metal-plastic hybrid structure utilizing a honeycomb architecture produced through 3D printing. By integrating metals with plastic polymers in a honeycomb configuration, this hybrid approach aims to combine the high strength and stiffness of metals …
Published in Trends in Machine design · Vol. 11, Issue 3, 2024 · pp. 36–43 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
An assessment of the mechanical properties of a composite material composed of natural fibres and reinforced with polymer
Abstract: Composites are essential in contemporary engineering and production, providing a flexible and effective solution for various applications that demand lightweight materials with exceptional performance. Natural composites provide adaptable and eco-friendly solutions for various sectors and applications, promoting environmental sustainability and the preservation of resources. Further advancements in research and development in this discipline are anticipated to enhance the utilization of natural composites across several industries. For this investigation, two types …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 778–786 Read article
-
Design and Performance Analysis of Sustainable Hybrid Composites for Impact Absorption and Lightweight Applications.
Abstract: This study explores the mechanical and structural properties of a novel hybrid composite composed of recycled tyre rubber, ceramics, and wood. The investigation focuses on key parameters, including energy absorption, compressive and tensile strength, and density, to evaluate the composite's suitability for diverse applications. The impact energy absorption test revealed that Sample A, comprising 50% rubber, 25% ceramic, and 25% wood, exhibited the highest energy absorption capability, with an average …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 95–104 Read article
-
Development and Evaluation of Mechanical Properties of Bio-Degradable Grass Fiber Composite Reinforced with Shrimp Shell Powder for Sustainable Applications
Abstract: Shrimp, a significant area of the seafood industry in terms of production, is exceeded by only prawn and salmon in terms of volume; its global annual production exceeds 4.4 million tons. India is a sea of shrimp production: the country recorded a record high production of 9 lakh tonnes (900,000 metric tonnes) of cultured shrimp in 2021. Andhra Pradesh was the major contributor to cultured shrimp culture, amounting to around …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 720–731 Read article
-
Investigation on Mechanical Properties of Geo Polymer Concrete With Fly Ash and Steel Fibers
Abstract: The goal of this project was to manufacture fly ash-based geopolymer concrete (FAC), a more environmentally friendly substitute for conventional Portland cement concrete (OPC) by using fly ash (FA) in place of cement. The study discovered that the properties of FAC were comparable to those of OPC, and that the concrete's performance was greatly impacted by the geopolymer's polymeric nature. The geopolymerization process was started with an alkaline solution, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 250–260 Read article
-
Evaluating the Structural Performance of Concrete with Partial Replacement of Fine Aggregate by Plastic Waste
Abstract: This work evaluates the performance of concrete incorporating plastic waste as a partial replacement for fine aggregate, at replacement levels of 0%, 5%, 10%, 15%, and 20%. Various tests were conducted on fresh and hardened concrete to assess workability, strength, and durability. The slump cone and compaction factor tests were used to measure workability, yielding a slump range between 25–30 mm and a compaction factor of 0.98, indicating medium workability. …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 69–75 Read article
-
Comparative Analysis on Concrete Strength Using Various Sizes of Aggregates and Combined Gradation
Abstract: This research delves into the effect of using various single coarse aggregate sizes and combinations of such by specific proportions. A thorough examination involving control specimens of 12mm, 20mm, and 25mm aggregates sizes, with combining proportions in the ratios – 5/8:3/8, 1/2:1/2, 3/8:5/8 have been conducted, shedding light on critical patterns that dictate concrete performance. The fine aggregate was properly zoned from the preliminary test. The design mix was calculated …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 29–36 Read article
-
Investigating The Synergistic Effects of Micro and Nano Particle Reinforcements in Powder Metallurgy-Processed Aluminum Metal Matrix Composites for Enhanced Mechanical Performance
Abstract: The ever-growing demands of modern mechanical applications necessitate the development of materials with superior mechanical properties. In this research, we delve into the creation and evaluation of Aluminum Metal Matrix Composites (Al MMCs) made via the powder metallurgy route, reinforced with both micro and Nano-scale particles. The key aim is to investigate the possible cooperative effects of this dual reinforcement approach on the mechanical behavior of the composite. Traditional aluminum …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 220–229 Read article
-
Evaluating the Optimal Alccofine-1203 Replacement Ratio in M20 Grade Concrete
Abstract: The primary objective of this research is to investigate the potential of partially replacing cement with Alccofine 1203 in M20 grade control concrete and to evaluate the resulting effects on the mechanical properties of the concrete. Alccofine 1203, a high-performance mineral admixture known for its ultrafine particle size and high reactivity, was used as a partial cement substitute at varying replacement levels of 5%, 10%, and 15% by weight of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 294–299 Read article
-
Optimizing Mechanical and Durability Properties of Eco-Friendly Composite Materials Using Recycled Fillers and ML Techniques
Abstract: The increasing demand for sustainable construction materials has intensified the exploration of recycled fillers as partial or full replacements for natural aggregates in composite materials. This study investigates the mechanical and durability performance of polymer matrix composites incorporating processed recycled fillers derived from construction and demolition (C&D) waste. Three distinct processing methods were employed to prepare the recycled fillers: untreated (URF), single processed (SPRF), and double processed (DPRF), with replacement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 269–309 Read article
-
A Study On Improving The Performance Of Concrete Using Coconut Fibers
Abstract: The aim of this study is to explore the incorporation of coconut fiber into M30 grade concrete and assess its impact on the strength characteristics. A literature review of different fibers is conducted and highlighting the working parameters. This research focuses to explore the efficacy of employing coconut fibers as micro reinforcement in concrete. The investigated properties encompass the compressive strength of the coconut fibers reinforced concrete (CFRC) at different …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 2, 2024 · pp. 26–36 Read article
-
Comparative Evaluation of the Pozzolanic Activity of Artificial Pozzolans: Steel Slag, Fly Ash, and GGBFS
Abstract: Evaluating the pozzolanic activity of specific industrial waste is crucial given the growing demand for cementitious materials. This research aims to expand the possibilities of incorporating pozzolanic waste such as Steel Slag (SS) as additives to cement. SS is a byproduct of the steel production process. A byproduct of the steelmaking process, slags have long been used as aggregates in building materials like concrete and roads. A closed-loop structure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 341–361 Read article
-
Investigations of Mechanical Testing and its Effects on Lithium Ion Battery and Battery Pack for Electric Vehicle Application
Abstract: This research delves into the comprehensive study of mechanical testing methodologies and their consequential impact on the structural integrity, safety, and performance of Lithium-Ion batteries (Li-ion) and battery packs designed for electric vehicle (EV) applications. The investigation aims to enhance the understanding of mechanical stressors' influence on the reliability and safety of energy storage systems crucial for the sustainable advancement of electric mobility. The paper opens with mechanical testing protocols …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 35–49 Read article
-
Optimizing Concrete Strength and Sustainability: Quarry Dust and Copper Slag Powder Additives
Abstract: This research investigates the potential of quarry dust and copper slag powder additives to enhance the strength and performance of concrete. Compressive strength tests were conducted on mortar cubes at 7 and 28 days to evaluate the effects of these additives. The results indicate significant improvements in compressive strength over time, with Mix A4 achieving a remarkable 43.42% increase in strength at 28 days. Other mixes also demonstrated substantial strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 1–6 Read article
-
An Experimental Investigation of High Performance by Using Steel and Polypropylene Fibres
Abstract: This study explores the feasibility of partially substituting conventional cement in concrete with steel and polypropylene fibers to improve mechanical performance and introduce alternative composite materials. Concrete cube specimens measuring 150 × 150 × 150 mm were cast with varying mix designs corresponding to M20 and M25 grades. The experimental program was executed in two distinct phases. In Phase I, control mixes of M20 and M25 grade concrete were prepared …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 7–13 Read article