Search
96 articles for “Aluminium”
-
An Experimental Investigation on Surface Roughness of Laser Beam Machining of Aluminium Alloy
Abstract: Laser beam machining (LBM) is a cutting-edge technique widely utilized for precision machining of advanced materials. This experimental investigation focuses on the surface roughness of aluminum alloy (Al 6061) during LBM. The study systematically examines the impact of process parameters such as laser power, cutting speed, and gas pressure on surface roughness (Ra). The significance of surface roughness in determining the quality and functionality of machined components is emphasized. The …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 82–104 Read article
-
Evaluating the Influence of Temperature on the Efficacy of Capparis Decidua Extract as a Corrosion Inhibitor for Aluminium in Acidic Media
Abstract: The study investigates the anti-corrosive properties of the ethanolic extract of Capparis decidua fruit on aluminum corrosion in a 2N HCl acid solution, using a weight loss technique at temperatures ranging from 303 to 343 K. At a concentration of 0.45%, the inhibition efficiency (η%) is notably high, reaching 63.15% at 303 K. The inhibitor's adsorption behavior on the aluminum surface is consistent with the Langmuir adsorption isotherm, suggesting that …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 3, 2024 · pp. 58–65 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Investigation of Process Specifications on Friction Stir Welded Aluminium 5083 and 6082 Alloys
Abstract: Aluminium 5083 alloys were mainly used for naval based applications because of better corrosion resistance feature. Similarly aluminium 6082 alloy being a structurally significant material found its applications in construction sector. Fusion welding of these two heterogeneous alloys is bit hard, since it evolves many defects. Present Investigation deals with two cases of distinct alloys through FSW process. Case 1 represents 31 experimental trails performed by 5 various tool pin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 1–11 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
Influence of the Load, Sliding Speed, and Weight Fractions on Wear of a Hybrid Aluminium Metal Matrix Composite
Abstract: The vital focus of the research is intended in examining the aspect that impact the rate of wear for a hybrid aluminium metal matrix composite. The percentages of two reinforcements that are employed, the weight, and the sliding speed are the variables taken. The procedure entails employing the vortex-stir casting process to produce the hybrid composite. Utilizing a pin-on-disc apparatus, the fabricated composite materials are evaluated in compliance with the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 188–198 Read article
-
Rotational Speed Influence on Weld Temperature in Friction Stir Lap Joint of Aluminium Alloy 6061 Using Numerical Simulation
Abstract: The weld quality assessment in friction stir welding depends on the choice of suitable weld parameters. Rotational speed is one such parameter. The study utilizes a computational fluid dynamics model to examine the influence of various rotational on the workpiece and weld interface temperature. The workpiece selected for this study is an Aluminium Alloy 6061, while the tool employed is a truncated conical pin tool featuring a conical shoulder in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 235–245 Read article
-
Microstructural and Mechanical characterization of Brass and Bronze alloys
Abstract: Brass, a copper and zinc alloy, is renowned for its malleability and resistance to corrosion, which makes it perfect for musical instruments and plumbing. Aluminium bronze, containing copper and aluminium, offers superior strength and wear resistance, commonly used in marine and industrial applications for its durability and corrosion resistance. This study aimed to compare the micro and macro structural characteristics of brass and aluminium bronze alloys. The microstructures of these …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 28–37 Read article
-
A Review Paper on Friction Stir Processing on Aluminium Alloys
Abstract: Friction stir processing is a step from friction stir welding, targeted at surface modification through improving the local microstructure via localized plastic deformation. The tool consists of a rotating mechanism incorporating a shoulder and pin that are inserted into the material, traversing the designated area. When the tool's shoulder and the workpiece make contact, friction develops, generating heat that produces plastic deformation. This localized plastic deformation and heat impact result …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 1–8 Read article
-
Vibration Characteristics of Copper-Aluminium Composite under Different Boundary Conditions: Experiment and Simulation
Abstract: The utilization of vibration analysis on the tapered beam significantly enhances the engineering investigation and design process. It is notable that the width of the tapered beam exhibits variation along its length, while the height remains constant. Experimental modal testing aims to determine modal factors such as natural frequency, damping, and mode shapes. A comparative study is presented in this paper, examining the vibrational characteristics of tapered beams composed of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 190–203 Read article
-
Optimization of EDM Machining Characteristics of Reinforced Aluminium Metal Matrix Composites by Taguchi
Abstract: Aluminium alloys metal matrix composites (AMMC) play a vital role in various industries, such as aerospace and automobiles. This study investigates the machining characteristics of AL8079 - based composites reinforced with 15 wt. % TiB₂ and 5 wt. % MoS₂ using Electrical Discharge Machining (EDM). The machining process was optimized using the L9 orthogonal array (OA) Taguchi - based design of experiments, and input parameters were considered at three levels, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 939–951 Read article
-
Thermal Interaction Analysis Between Flexible Magnetic Abrasive Brush and Aluminium Alloy During Single-Pole MAF
Abstract: Magnetic Abrasive Finishing (MAF) is a precision surface‐finishing approach that employs magnetic abrasive particles (MAPs) within a managed magnetic field to eliminate micro-level material and enhance surface condition. In the finishing process, the friction created between the workpiece and the flexible magnetic abrasive brush (FMAB) leads to heat accumulation, which may badly affect the surface integrity. This study focuses on investigating the temperature distribution at the FMAB–workpiece interface to decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1906–1918 Read article
-
Numerical Studies on Deep Drawability of the Aluminium Alloy, AA6082 and Parameters Affecting It
Abstract: Deep drawing is a metal forming operation used for manufacturing sheet-metal components for application in the automobile, aerospace, and packaging industries. The objective of the present work was to study the various parameters influencing the drawability of AA6082. The deep-drawing process was modeled and simulated in Ls-Dyna Pre-Post(R) V4.6.17 software. The tensile test was performed according to the ASTM-E8M standard on AA6082-T6 material and subsequently annealed to attain higher ductility. …
Published in Journal of Polymer & Composites Read article
-
Enhancing Combustion Efficiency and Emission Reduction in Single Cylinder CI Engines: A Study on Waste Dairy Scum Methyl Ester Biodiesel Blends with Aluminium Oxide Nanoparticles
Abstract: In response to the urgent need for sustainable energy solutions and environmental considerations, this study explored the utilization of waste dairy scum methyl ester biodiesel blended with diesel and enhanced with Al2O3 nanoparticles as an additive. The biodiesel was prepared by blending waste dairy scum methyl ester with diesel and incorporating 100 ppm Al2O3 nanoparticles. Experimental tests were conducted on a single-cylinder diesel engine, comparing neat diesel, B30 biodiesel blends …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 15–28 Read article
-
Deformation and Densification Behaviour of Sintered Aluminium Alloy and Chromium Carbide Metal Matrix Preforms
Abstract: This paper presents comprehensive experimental results focused on the deformation and densification behavior of sintered AA2618 - 2% Cr3C2 metal matrix preforms. The study specifically examines preforms with varying aspect ratios subjected to a cold upsetting process. To create the powder preforms, an initial theoretical density of 89% was achieved using a cylindrical die on a 600 kN hydraulic press. The sintering process was conducted in an electric muffle furnace, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 125–131 Read article
-
Heat Transfer Analysis Between Two Aluminium Parallel Plates With Natural Convection
Abstract: As a type of energy, heat can be transferred from heated systems using the natural convection heat transfer method, which has several uses in different industries. Natural convection method of heat conveyance is suitable in many cases due to absent of any external sources like fan. The transfer of this kind of energy can be listed as electrical and electronics equipment, nuclear reactors, domestic convection, dry cooling towers, thermo siphons, …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 26–34 Read article
-
Fabrication and Analysis of Al 7075 Based Metal Matrix Composites - A Review
Abstract: Aluminium 7075 alloys are extensively used in aerospace, marine, aviation, and automotive industries due to their superior mechanical properties, high strength-to-weight ratio, and low density. However, to further enhance their performance, aluminium-7075 metal matrix composites (AMMCs) are developed by incorporating various reinforcements. This paper focuses on the influence of reinforcements on the mechanical, tribological, and corrosion behavior of AMMCs. The study examines fabrication techniques, particularly the stir casting method, which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–12 Read article
-
Experimental and Numerical Investigation of Corrosion-Induced Failures in Copper-Tin Alloy (Cu-Sn) and Aluminum-Magnesium Alloy (Al-Mg) Connectors: A Stress–Corrosion Coupling Analysis
Abstract: The utilization of an integrated experimental and finite element modelling (FEM) methodology, this study investigates the degradation and failure mechanisms in polymer composite electrical connectors exposed to aggressive environmental conditions. Epoxy- and polyamide-based composites, reinforced with carbon and glass fibers, were subjected to accelerated salt spray and humidity–temperature cycles to simulate prolonged outdoor exposure. Electrochemical and environmental aging experiments revealed that chloride ions and moisture ingress were responsible for matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 366–379 Read article