Search
180 articles for “Alloy composition”
-
A STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM-4.5%COPPER ALLOY METAL MATRIX COMPOSITES REINFORCED WITH ALUMINA FIBERS USING SQUEEZE CASTING PROCESS
Abstract: Aim of the present investigation is to develop aluminium-4.5% copper alloy metal matrix composites by reinforcing with chopped alumina fibers in varying percentage like 10%, 20% and 30% and so on. The casting can be produced by using Squeeze casting process; these castings were studied for all its mechanical properties like tensile, hardness, wear and microstructure and corrosion analysis. It is observed that increase in reinforcement improves the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 22–31 Read article
-
Machining-Induced Surface Integrity Optimization of High-Carbon Alloy Steel for Enhanced Polymer–Metal Composite Interface Performance
Abstract: The functional performance and structural reliability of polymer–metal hybrid composites are strongly influenced by the surface integrity of metallic substrates used for interfacial bonding and load transfer. In this context, machining-induced surface characteristics play a critical role in determining adhesion behavior, dimensional stability, and mechanical compatibility within composite architectures. The present study investigates the hard turning performance of a newly developed high-carbon alloy steel intended for composite-integrated structural applications, with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1531–1546 Read article
-
Synthesis and Characterization of Al-Mg-Si Alloy based Hybrid Composite Reinforced with SiC and Graphite
Abstract: The present work is carried out to investigate the mechanical properties of Al-Mg-Si alloy matrix based hybrid metal matrix composites (MMCs) using stir casting method owing to its popularity and large scale productions. SiC and graphite reinforcements were added each with 1%, 2%, 3% and 4% respectively to fabricate four composites specimens. X-ray diffractometer and scanning electron microscope were used for phase identification and microstructure characterization (SEM). Density, hardness, compressive …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 9–19 Read article
-
Characterization for Metal Matrix Composite of Aluminium-Magnesium Alloy with SiC and B4C Reinforcement with Different Weight Percentage
Abstract: Metal matrix composites (MMCs) based on magnesium alloys are excellent candidates for engineering light structure materials, and have great potential in automotive, high performance defence and aerospace applications. Crackpropagation as well as delamination along to the interface are two major failure modes of the multilayered composites subjected over bending load. In this paper, the study is focused on the preparation of metal-matrix composites with SiC and B4C reinforcement in particulate …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 3, 2015 · pp. 73–79 Read article
-
Fabrication and Mechanical Characterization of Hybrid Metal Matrix Composite Castings
Abstract: This work investigates and addresses the casting of a novel hybrid composite material with tungsten carbide and aluminum-silicate particles mixed at varying weight fraction rates. Production of hybrid composite has some advantages if it is processed by near net shape techniques. The simplest method for dealing with this hybrid composite is the turbulence produced by the vortex agitating technique. The vortex mixing method is used in this study to create …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 3, 2024 · pp. 32–38 Read article
-
Composite Solutions for Sustainable Mobility: Aluminum Alloy, Carbon Fiber, and Graphene in Chassis Frame Design
Abstract: This study describes the design and analysis of a chassis frame made of carbon fibre, graphene, and aluminium alloy composite materials. A frame must be able to sustain vibration, shocks, and bending and torsional pressures. This piece of work uses a rectangular cross-sectional area to design a frame. After that, the simulated chassis is taken for investigation using composite materials such as aluminium alloy and carbon fibre reinforced with graphene. …
Published in International Journal of Solid State Innovations & Research · Vol. 1, Issue 2, 2023 · pp. 1–7 Read article
-
Development and Characterization of Aluminum Alloy Reinforced with Hematite Particulate Composite for Automotive Application
Abstract: This study reviews the characteristics of aluminum alloy with Hematite particulate composite reinforced at different wt. % prepared by different casting methods through which we can achieve required hardness, wear resistance, microstructure and life extension of an automotive parts. This paper describes the chemical composition of different aluminum alloys and Hematite. SEM analysis is studied in order to determine the nature of the structure and Design of Experiments (DOE) using …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 7–11 Read article
-
Development and Characterization of Pseudo-Elastic Ternary Cu-Al-Be Shape Memory Alloy and Its Scope as Shape Memory Hybrid Composites
Abstract: This research investigated the potential of the Cu-11.95Al-0.51Be shape memory alloy (SMA) for vibration damping applications. This specific composition of the alloy was selected to ensure the presence of the austenite phase (ß-phase) and to evaluate the pseudo-elastic (SE) behavior. This research explores the design, fabrication, and characterization of a pseudo-elastic ternary alloy. The key parameters examined in this study were the alloy phase and pseudo-elastic behavior. Other important factors, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 370–385 Read article
-
Enhancing Cooling Efficiency in Dual Nozzle CO2-Based Vortex Tube Systems for Machining Titanium Alloys: Implications for Polymer and Composite Processing
Abstract: In machining of Titanium alloys, the cutting temperature plays a vital role that directly influences the performance and it is required to maintain as low as possible. In this study, a dual nozzle Vortex Tube Cooling System (VTCS) that supplies cool compressed CO2 gas is developed to reduce the cutting temperature in Ti-6Al-4V machining. The experiments were conducted at constant cutting and flow parameters during turning at different levels of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 284–291 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Modern Trends in Nano-Steel and Composites
Abstract: Alloy formation strategies procured as from powder produced after energetic mill. Micro-component is fabricated from nano-powder processing under controlled heating under reducing atmosphere. Nano-powder introduced more to ideal properties at rest an addendum protocol tending to theoretical assess. Steel crystal refinement is logical to subject nano-metric dimension to obsolete imperfections and to enhance strength than usually procured value. Discovery of nano-grain redefined super-strong steel to subject design of steel with …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 23, Issue 1, 2021 · pp. 16–25 Read article
-
Analysis and Strength Assessment of Solid and Honey Comb Structure of Turbofans in Aeroengines
Abstract: Weight reduction of turbofan engines is one of the main concerns of aero engine manufacturers inorder to reduce fuel burn. To achieve higher fuel efficiency, aero engine manufacturers developturbofans with higher bypass ratio, which can only be achieved with larger (and heavier) fan sections.This makes weight reduction in fan components a major consideration and becomes a key driver forthe use of composite materials in future engines. The objective of this …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 1–16 Read article
-
Tensile and Microstructural Behaviour of Friction Stir Welded AL7050 Hybrid Composites Reinforced with Multani Mitti and Cow Dung Ash
Abstract: The study examines Al7050 aluminum alloy composites made by stir casting and bonded by friction stir welding (FSW), supplemented with environmentally friendly Multani Mitti (MM) and cow dung ash (CDA). The study assesses the effects of different hybrid reinforcement contents (0–8 vol%) on the microstructural properties, hardness, and tensile behavior of the base alloy and its FSW joints. Tensile testing reveals an initial decline at 2% reinforcement but a notable …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 78–89 Read article
-
Wear Behavior of Al-Alloy (Al-5 Mg) in-situ Reinforced TiB2 Particulate
Abstract: A research has been carried out for replacing Al monolithic alloys by aluminium (Al) based metal matrix composites (MMCs) in many engineering applications where high wear resistance and stiffness are required. In this paper, the investigated dry sliding wear behavior of TiB2 particulate reinforced composite of Al-Alloy (Al-5 Mg) is discussed. The in-situ Al-Alloy (Al-5 Mg) 10wt% TiB2 composite material were prepared by molten flux reaction synthesis using electric melting …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 32–37 Read article
-
Innovative Applications of Smart Materials in Aviation: A Comprehensive Review
Abstract: Smart materials are transforming the aviation industry by offering innovative solutions that enhance performance, safety, and sustainability. The use of smart materials can enhance the efficiency, safety, and longevity of aerospace structures by sensing, responding, and adjusting to environmental changes in real time. The objective of this review is to examine how smart materials can be used in aviation, especially in the field of sensor networks, control systems, and structural …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 114–132 Read article
-
STUDIES ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF LM25 COMPOSITES
Abstract: Aluminium LM25 alloy is widely used at automobile and aircraft industries in the form of cast component with varying section size. This study investigates how the microstructure and mechanical properties of LM25 alloy before and after addition of reinforcement material of coconut shell ash to the base material aluminium alloy as Metal Matrix Composites have wide range of applications in current industrial scenario. Conventional materials have limitations with respect to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 2, 2018 · pp. 12–17 Read article
-
Study of Electrochemical and Mechanical Properties of Graphene/HAp Composite Coating on Ti-13Nb-13Zr Alloy via Electrophoretic Deposition for Biomedical Application
Abstract: Titanium-13niobium-13zirconium alloy has widespread potential in biomedical applications due to its high degree of biocompatibility, favourable mechanical properties, high corrosion resistance, and high possibility of osseointegration. The surface was improved by electrophoretic deposition method using hydroxyapatite and graphene (5 g nanoHAp) (5 g nanoHAp+0.06 nanoGr) and suspended in ethanol solution at different conditions of time (1, 3, and 7 minutes) and voltage (50, 70, and 100 V). The effect of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 91–106 Read article
-
Analysis of fabrication methods on Mg-based MMCs –A Review
Abstract: Magnesium is an essential material for resolving the applications in automotive applications such as in the use of gearbox bearings, casting dies etc. In the current studies, various researchers have made efforts to improvise the casting methods and to invent new fabrication procedures for Mg metal matrix composites (MMCs). This paper shows a basic study of fabrication methods of Mg-based MMCs. Such as pressureless infiltration, mechanical alloying, stir casting etc. …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 101–108 Read article
-
A Literature Review on Al-Si-TiB2 In-situ Metal Matrix Composites
Abstract: This review focuses on various aluminium alloys as matrix materials used for synthesis of in-situ metal matrix composites(MMCs) with different reinforcements like graphite, Al2O3, SiC, TiB2 and so on for their excellent characteristic properties. Taking their limitations into account, tailoring the physical, mechanical as well as wear properties of these composites with the use of appropriate type and amount of reinforcement along with optimum process parameters has also been investigated …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 7–19 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article