Search
551 articles for “steels”
-
Water Simulation Phenomenon for Porous Asphalt Pavement with Used Local Materials
Abstract: The paper describes the performance of open graded asphalt pavement with benefit of local materials aggregate and asphalt that suitable to use in hot environment. A rainfall simulation phenomenon 1.5 1.0 0.65 m length, width and height respectively, steel box was constructed to develop relationships between the surface runoff and the infiltration volume from a porous asphalt pavement surface. The 5 cm bedding course, 30 cm reservoir course …
Published in Trends in Transport Engineering and Applications · Vol. 4, Issue 1, 2017 · pp. 36–47 Read article
-
Comparative Study and Analysis of Composite Bridge and Concrete Bridge for Moving Loads
Abstract: Composite Bridges are mainly used in the construction of various flyovers to minimize the traffic flow. Composite highway bridges are subjected to many dynamic actions with different magnitudes due to the action of different types of vehicles. Depending on the magnitude and intensity and many other adverse effects the structural system and performance may compromise and that may lead to a reduction of the expected bridge life. A composite (steel …
Published in Trends in Transport Engineering and Applications · Vol. 9, Issue 2, 2022 · pp. 1–9 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 859–873 Read article
-
Motorised Dual Side Shaping Machine with IoT Integration
Abstract: This work presents the design, fabrication and testing of a Motorised Dual Side Shaping Machine intended for small-scale workshops and educational laboratories, enhanced by an Internet of Things IoT based motor control system using the ESP32 microcontroller. The machine employs a 250 watt geared motor as the prime mover, transmitting power through a chain and sprocket mechanism to a 20 mm mild steel shaft supported on pedestal bearings (P204), where …
Published in Trends in Machine design · Vol. 13, Issue 2, 2026 · pp. 26–35 Read article
-
Monitoring the Structural Health of RC Beam Lap Splices using Wave Propagation and PZT Sensors
Abstract: This paper describes the use of piezoelectric sensors in a wave propagation-based Structural Health Monitoring (SHM) method to identify lap splices in steel reinforcing bars. Straight and lapped steel bars with lap lengths of 10° and 20° were used for the experiments. Lead Zirconate Titanate (PZT) transducers were employed, one of which served as an actuator to produce stress waves and the other as a sensor to record the signals …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 2, 2026 · pp. 65–70 Read article
-
Structural Design of Offshore Structures: A Review of Indian and International Standards
Abstract: Offshore structures—including fixed steel jackets, topside modules, offshore wind turbine support structures, and floating systems—are designed to withstand combined gravity, environmental, seismic, and operational loads under substantial uncertainty and limited access for inspection and repair. Structural design practice has historically relied on internationally recognized standards, particularly the American Petroleum Institute’s API RP 2A, the International Organization for Standardization’s ISO 19900 series, including ISO 19902 for fixed steel structures, and Det …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 13, 2026 · pp. 36–51 Read article
-
Electroplating and Corrosion Properties of Binary and Ternary Zinc Alloys with Nickel, Cobalt and Iron
Abstract: The anti-corrosive three binary (Zn-Ni, Zn-Co, Zn-Fe) and two ternary (Zn-Ni-Co, Zn-Co-Fe) alloy coating films on mild steel from acid chloride bath using sulphanilic acid and gelatin as additives for the electroplating technique. The normal Hull cell method was used to optimize the bath compositions, temperature and pH of the bath solutions for coating performance against corrosion. The cause of current density (CD) on metal weight percentage (M = Ni, …
Published in Journal of Thin Films, Coating Science Technology & Application Read article
-
Advanced Quantitative Analysis of Dynamic Recovery during Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls, and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering Read article
-
Failure Analyses of 16 mm Thick SA 516 GR 70 Auto Clave
Abstract: With the acceleration of global industrialization, there is a demand for high-or low-pressure storage of liquids or gases. Because of the complicated operating conditions that will inevitably encounter a possible hazard, pressure vessel design is a critical responsibility. Previous failure studies have revealed that the presence of local loads and discontinuities increases pressure vessel fracture. As a result, a detailed examination of pressure vessel steel from the standpoint of fracture …
Published in Trends in Mechanical Engineering & Technology Read article
-
Research Paper on Thermal Comfort Analysis of Tractor Considering Multi-Parameters
Abstract: The main functions of a vehicle cabin are to provide a comfortable and relaxing environment for its operator and to protect them from vibrations, noise, and other adverse influences. Modern agricultural tractor cabins are complicated, high-efficiency systems, and the goal of their development is to reduce their negative influence on the environment. Main factors for thermal comfort are the dry-bulb temperature, relative humidity, surrounding surface temperature, and air motion. A …
Published in Journal of Mechatronics and Automation Read article
-
Determination of fire Resistivity of Door and Window Materials at Portharcourt Markets in Nigeria
Abstract: The persistence of fire outbreaks in markets is a problem in Nigeria and the repetition of this problem is very frequent at Port Harcourt in Rivers State. To curtail this problem, research was made on the three major markets in Port Harcourt with the aim of determining the fire resistivity of their door and window materials, in order to generate guidelines for designing doors and windows of market buildings in …
Published in International Journal of Architectural Design and Planning · Vol. 1, Issue 1, 2023 Read article
-
IMPACTS OF GREEN FACADES IN MODERN ERA
Abstract: Modern architecture was an architectural movement or style centred on cutting-edge construction technologies, particularly the use of reinforced concrete, glass, and steel. The foundational goal of 21st century architecture is to create better structures that are inherently sustainable by utilising better materials and technologies. Facades are the outermost covering of a building which have the maximum interaction with the environment. A wall that is completely or partially covered with vegetation …
Published in International Journal of Environmental Planning and Development Architecture · Vol. 1, Issue 1, 2023 · pp. 44–57 Read article
-
TiO2 Refined Flux Provides Significant Impact on Saw Bead Shape, Particle Size, and Hardness
Abstract: This experiment is very interested in how adding titanium dioxide powder to submerged arc welding on low alloy steel plates affects the bead geometry, grain size, and hardness. The commercial fluxes were combined with powdered titanium dioxide at varying concentrations (2.5%, 5%, 7.5%, 10%, and 12.5%). No changes were made to the welding process parameters despite the variety of welding situations. It has been shown that the inclusion of titanium …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 70–80 Read article
-
Prototype Model Development and Design Analysis of A Solar Tricycle for Physically Challenged People in India
Abstract: Society is greatly concerned about the mobility of individuals with physical disabilities. The scarcity of energy resources and the issue of pollution are currently the primary concerns. These issues can be resolved by employing alternative energy sources such as solar power. This paper presents an overview of the existing solar tricycles designed for those with disabilities. It also improves a handicapped-friendly solar-powered tricycle. The goal is to reduce handicapped people's …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 1, Issue 1, 2023 · pp. 43–56 Read article
-
iBell: Easy to Use Home Alarm
Abstract: This project aims to secure any place, be it a home, office, or other space. The doorbell records a video call to the registered number when it is pressed. It sends you a message if someone wanders in front of the door. The individual who is loitering in front of our door is then visible to home owner. Therefore, if we know the person, we can open the door; if …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 1, Issue 1, 2023 · pp. 21–28 Read article
-
Comparative Analysis of Personal Rapid Transit System with Thermoplastic Material for Interconnecting Metro Station with Airport
Abstract: Personal rapid transit (PRT) systems open a slew of new possibilities for solving airport-related transportation issues, both on the ground and in the air. For use in airport applications, the advantages and disadvantages of this mode of transportation are contrasted. An implementation of the ULTra Personal Rapid Transit system to assist passenger and staff vehicle squares at Heathrow is used to showcase the work. The ULTra infrastructure's compact size and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 97–108 Read article
-
Mechanical Characterization of Adhesive in Lap Joint Under Tensile Load
Abstract: The present work gives details of adhesive characterization in lap joints under quasi static tensile failure load. Rivets are major threat for an aircraft structure because of high stress concentration at lesser area ease to failure and also causes drag in aerodynamic perspective. Researchers are searching for a different method to avoid the stress concentrations in lesser area. The use of adhesives instead of rivets is most feasible solution for …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 96–103 Read article
-
Conceptual Design and Static Model Analysis of Landing Gear
Abstract: An aircraft's landing gear system plays a critical role in effectively managing and dissipating kinetic energy generated during the landing impact, as well as mitigating vibrations induced by the aircraft's passage over irregular runway surfaces. This capability is indispensable for the proper functioning of a well-designed landing system. Among the various types of shock absorber landing gear systems employed in aircraft, the oleo-pneumatic shock absorber stands out as the most …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 145–163 Read article
-
The Impact of Distinct Dopant Elements (Cu and Al) on the Electrochemical Characteristics of MgO Thin Films Formed Using the Electrodeposition Technique
Abstract: By using an aqueous electrodeposition technique, copper (Cu) and aluminum (Al) doped magnesium oxide (MgO) thin films were created. We examined how the dopant elements affected the electrochemical characteristics of MgO thin films deposited on stainless steel (SS) substrates in the current study. We annealed the MgO-based films at 450◦C. The MgO films doped with Cu and Al have been determined by X-ray diffraction (XRD) results. Cyclic voltammetric analyses (CV), …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 2, 2023 · pp. 12–17 Read article
-
Performance Evaluation of Eco-friendly Cutting Fluid in Machining Process—An Approach towards Environmentally Friendly Production
Abstract: The machining industry's evolving environmental consciousness has prompted a growing demand for cutting fluids devoid of chlorine and sulphur, thus fostering sustainable machining practices. This surge in demand is driven by mounting apprehensions over environmental contamination and worker safety. As the industry transitions to modern cutting fluids, it becomes imperative to comprehend their effectiveness and the optimal machine parameters required for their deployment in the turning process. In our current …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 149–160 Read article