Search
524 articles for “crystallization”
-
Edge-detecting Technique to Increase Slew Rate for Differential Amplifier
Abstract: This paper addresses a very compact low-power class-B buffer amplifier topology for large-size liquid crystal display applications. With enhanced slew rate, Edge-Detecting technique the proposed buffer achieves high-speed driving performance, draws a small quiescent current during static operation. The proposed SRE design is achieved more than 68 times improvements in the slew rate without significant increase of static power dissipation. Post-layout simulations show that the proposed buffer can drive a …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 49–58 Read article
-
IoT and WPAN based approach for Water Quality Monitoring of Fish Farm
Abstract: AbstractTo make profit in fish farming, it is required to increase production and quality of fish. For this, it requires fresh water. As we know contaminated water cannot produce good quality of fish. Therefore it is required to monitor the quality of water. This paper proposed internet of things (IoT) based system for monitor the quality of water for pond and tank with respect to fish farming. Sensor and Inlet …
Published in Journal of Instrumentation Technology & Innovations · Vol. 7, Issue 3, 2017 · pp. 16–23 Read article
-
Steel Under Strain Hardening
Abstract: Dislocation is crystal lattices dis-organization to absorb energy or to change atomic allocation to lower most energetic position. Mild steel studies confer sessile of such dislocation forests is limit for infinite dislocation multiplication or yield drop, which further limit at tensile strength. In usual cases this strain hardening either have no require or require in sharp cases or tend to get strain harden like crash boxes of auto-sectors. High strength …
Published in Journal of Mechatronics and Automation · Vol. 7, Issue 1, 2020 · pp. 31–42 Read article
-
Industrial Tank Pressure, Temperature and Humidity Controller using Microcontroller
Abstract: In this paper, a computer based pressure, temperature and humidity viewing and controller using microcontroller has been discussed. The article achievement is an authoritative part in manufacturing in instruction to protect the excellence of amenity. Hotness sensor measures the hotness, humidity and compression sensors measure moisture and weight respectively and corresponding similarity indication, which is additionally treated by the microcontroller. The statistics will be showed on the liquid crystal display …
Published in Journal of Microcontroller Engineering and Applications · Vol. 3, Issue 3, 2016 · pp. 24–27 Read article
-
IoT-Enabled Pet Nutrition: Designing an Automatic Pet Food Dispenser
Abstract: The paper aims to address the challenges faced by pet owners in ensuring precise feeding, real-time health monitoring, and remote-control capabilities. By integrating hardware components such as Arduino Mega, Project Board, Liquid Crystal Display, Power Supply, and Load Cell, long with software development in Embedded C and Arduino Uno, the Pet Feeder system offers a comprehensive solution for remote pet care. The system allows pet owners to input the pet's …
Published in Journal of Microcontroller Engineering and Applications · Vol. 10, Issue 2, 2023 · pp. 38–44 Read article
-
Preparation of Phase – Pure Nanocrystalline Anatase and Rutile TiO2 using Hydrolysis of TiCl4 in presence of surfactants
Abstract: Hydrolysis of TiCl4 was carried out in two different ways to prepare nano crystalline TiO2. In the first method the hydrolysis of TiCl4 was carried under high acidic conditions at low temperature. In the second method hydrolysis was carried out using (NH4)2SO4 as an additive. It can be seen that the hydrolysis of TiCl4 under high acidic conditions promotes the growth of rutile phase of TiO2, where as hydrolysis in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 1, 2018 · pp. 31–40 Read article
-
Experimental Setup to Determine Stress Wave Propagation in a Compound Bar
Abstract: Deformation undergone by a body due to impact results in development of dynamic stresses. This deformation depends on the material properties and geometry. Advancements made in stress wave propagation are focused at the necessity to understand dynamic history of structures subjected to applied loads. Stress travels with different velocities in different bodies depending upon material characteristics, crystal structure etc. Forces applied on bodies at short intervals of time result in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 2, 2018 · pp. 1–6 Read article
-
Characterisation of FSW Joints of Aluminium and Titanium Alloys: A Review
Abstract: AbstractThis paper presents a review on friction stir welding of different aluminum and titanium alloys. Aluminum alloys are most widely used in automotive, aerospace and ship building industries as high strength-to-weight ratio materials. Titanium alloys are also attractive in these fields due to their high specific strength and good corrosion resistance. In some special applications, the complementary characteristics of Ti and Al are required, such as increased strength, low weight …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 25–29 Read article
-
Recovery of Tungsten and Copper from Waste Tungsten Copper Borings
Abstract: During the last many years, the unused tungsten and copper alloy from the discarded electric and electronic equipment and industrial scraps are gathering attention as a section of waste. Because of tungsten's many diverse uses, numerous types of scrap were available for recycling by a wide variety of processes. In the present study, tungsten and copper was recovered by leaching process in ammonium hydroxide solution followed by electro winning process. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 1, 2017 · pp. 1–8 Read article
-
Processing and Characterization of Ni2MnSn FSMA
Abstract: Among Ferromagnetic Shape Memory alloys (FSMAs), Ni2MnSn Heusler alloys owing to occurrence of large magnetic field induced strain (> 10%) along with other interesting properties like premartensitic transition, high transformation temperature, large magnetocaloric effect and low stress of twin variant rearrangement. The prominent challenges facing the design and utilization of these specialized alloys are a limited range of operating temperatures, phase transformations that have high sensitivity to variations in composition, …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 154–159 Read article
-
Principles and Use of Analytical Transmission Electron Microscope
Abstract: At the beginning of the review the analytical Transmission Electron Microscope is introduced. Equipment, imaging, diffraction and use of analytical TEM are described. Electron path under magnetic lens is delineated, emphasizing the lens aberrations, diffraction, astigmatism and gun brightness. Selected area electron diffraction patterns of Al-Cu and Inconel super alloy are used to index crystallographic planes and to derive zone direction while basic sources of diffraction contrast are depicted using …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 27–49 Read article
-
Optical Properties of Barium Borate (BaB2O4)Compound for Current Optoelectronic Applications
Abstract: In this work,Barium borate was prepared by sol-gel synthesisdepending on different molar (0.1, 0.2, 0.3 0.4 and 0.5) molar. Barium borate is an inorganic compound, and it was useda borate of barium with a chemical formula BaB2O4 or Ba(BO2)2 It is available as hydrate or dehydrated form, as white powder or colorless crystals. The optical characteristics of the prepared samples have been investigated by UV/Vis spectrophotometer in the wavelength range …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 1, 2020 · pp. 49–58 Read article
-
Origins of Several Foam Ample Forms in Materials Science
Abstract: Foam culture refers to the light weight philosophy for the additional subject released from appropriate specific performance in relation to the environment. Regular study has been done to actualize the subject required under ballistic strength of degeneration issues. The cases studied in this article were from polymer functional ceramic issues as well as originating flexible regions. Though, water-purification areas on the coast have origins Ni-nano that uses carbon-tubed analogs to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 32–36 Read article
-
Synthesis and Characterization of Nickel doped Barium Niobate Ba (Ni0.5Nb0.5)O3 (BNN) Nanomaterial
Abstract: AbstractFerroelectric materials are of great interest for researchers worldwide, because of their unique physical properties and wide range of applications. The composite nanomaterial Ba(NiNb)0.5O3 (BNN) was synthesized by conventional solid state reaction method. The structural characterization was done by x-ray diffraction (XRD). The research was carried out to investigate structural properties of BNN nanomaterial as a function of sintering duration. BNN was sintered at 10000C and different samples were prepared …
Published in Journal of Microelectronics and Solid State Devices · Vol. 5, Issue 2, 2018 · pp. 29–33 Read article
-
Mechanisms and Applications of Lyoluminescence
Abstract: When strongly energized halide or organic crystals are dissolved in а liquid solvent like water, light is emitted as an end result of а recombination process. This emission of light is known as Lyoluminesсenсe0. The emitted light intensity, called the Lyoluminescent intensity, depends on а class of factors like radiation doses, probability of radiative recombination, rate of dissolution inside the solvent, etc. The effect is enhanced when the materials have …
Published in Journal of Nuclear Engineering & Technology · Vol. 12, Issue 1, 2022 · pp. 1–6 Read article
-
Preparation and Charactrization of lead free piezoelectric ceramic/PVA polymer composites
Abstract: Sodium potassium niobate (Na0.5K0.5 NbO3 ) ceramic was prepared through conventional solid state reaction using AR grade NaNO3, KNO3 and Nb2O5 in stochiometric ratio. Poly vinyl alcohol (PVA) polymer - sodium potassium niobate composite films were prepared by solution casting method by changing the blend ratio of PVA / Na0.5K0.5NbO3. The prepared samples in the form of films were characterized by powder X-ray diffraction. The XRD studies revealed the presence …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 1–8 Read article
-
To explore the effect of polyethylene glycol additive on mechanical and gas permeation properties of polyvinyl alcohol membranes
Abstract: Polyvinyl alcohol (PVA) membranes were prepared by solution casting and blended with Polyethylene glycol (PEG) in de-ionized water which led to the formation of porous and flexible membranes. Extensive experimentation were performed, in order to find out that at what composition of PEG pores will be generated in the PVA membranes. The PVA polymer is a hard and crystalline thermoplastic so high concentrations of PEG were used, i.e. 40 wt%, …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 27–33 Read article
-
Synthesis of Polyorthanisidine by Interfacial Polymerization
Abstract: AbstractPolyorthoanisidine has been synthesized by interfacial polymerization method. O-anisidine has been used as a monomer, hydrochloric acid is used as a dopant and ammonium persulphate as an oxidiser. The solvent used for the study is chloroform, isopropanol, hexane and xylene. The polyorthoanisidine obtained is characterized for particle size analysis. It is observed as with xylene as a solvent the least particle size has been observed with Z average value of …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 1–6 Read article
-
Electrical Conductivity and Antibacterial Studies on Chemically Synthesized Poly (2-Methyl Aniline-co-2-Chloro Aniline)-Blend-Polyurethane
Abstract: AbstractElectrically conducting copolymer blend, poly (2-methyl aniline-co-2-chloro aniline)-blend-polyurethane has been synthesized chemically by oxidative polymerization technique using 0.3 M ammonium persulphate (APS) as oxidant, 0.1 M of the anionic surfactant, sodium lauryl sulphate and 1 M HCl as dopant. The formation of the copolymer blend has been confirmed by comparison with the spectral data obtained for the copolymer which was synthesized under the same conditions and characterized. The copolymer blend …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 7–14 Read article
-
Infrared Spectroscopic Studies on Multiwalled Carbon Nanotubes Reinforced Acrylonitrile Butadiene Styrene Composites
Abstract: AbstractFourier Transformed Infrared (FT-IR) Spectroscopic analysis is an effective technique to captures the response of the molecular motions such as stretching, bending and torsional vibrations of materials. In this study, FTIR analysis has been done on two different grades of multiwalled carbon nanotubes (MWCNT) C100 and NC7000. NC7000 grade MWCNT has a higher degree of crystalinity and shows 60% higher absorbance in the wavelength range of 600-3600 cm-1. These two …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 15–22 Read article