Search
620 articles for “CST MWS’14”
Nothing matched all of your words, so these match any of them.
-
Recovery of Iron Values from Iron Ore Slimes using Reagents
Abstract: Mining wastes include waste generated during the extraction, beneficiation or processing of minerals like iron ore fines, slimes and tailings. Approximately 10–20% of the raw material is discarded as slimes in to slime ponds/tailing dams. Recovery of iron values from slimes result in economic benefit by utilization of waste as a resource and minimizes the threat to the environment. The iron ore slime is generally considered as waste due to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 3, 2016 · pp. 32–43 Read article
-
A Novel Design for High Speed & Area Efficient Compressor Based Vedic Multiplier
Abstract: Multipliers are the most important part in any arithmetic and logic unit, AbstractMultipliers are the most important part in any arithmetic and logic unit, accumulators and digital signal processors. Due to the increasing constraints on delay, the design of faster multipliers is emphasized. Among several multipliers, Vedic multipliers are preferred for their speed of operation. Here the proposed Vedic multiplication techniques are based on “URDHVA TIRYAKBHYAM” a fast and efficient …
Published in Journal of Microelectronics and Solid State Devices · Vol. 5, Issue 3, 2018 · pp. 1–10 Read article
-
Photonic Design of Two Input XOR Gate at 50 Gbps Data Rate
Abstract: This manuscript explores the photonic design of two input XOR gate at 50 Gbps data rate. In the photonic circuit, each component exercised supports for the light wave propagation. The performance of optical XOR gate is alike to their digital variant. The key constituents utilized in designing of this photonic network are 2×2 optical coupler and semiconductor optical amplifier. The proposed design is executed by the igniting the nonlinear attributes …
Published in Journal of Microelectronics and Solid State Devices · Vol. 4, Issue 2, 2017 · pp. 32–39 Read article
-
Implementation of UART with CALBO
Abstract: The increasing growth of submicron technology has resulted in the difficulty of VLSI testing for designers who always look for simple and cost effective logic structure to realize a complex function. Thus Automatic Testing Equipment (ATE) is becoming costly process for testing. To reduce the cost of testing the chips, Built in Self-Test (BIST) has emerged as a cheaper alternative. BIST is a design technique that allows the chip to …
Published in Journal of Microelectronics and Solid State Devices · Vol. 2, Issue 1, 2015 · pp. 6–12 Read article
-
Synthesis and Characterization of Ether Containing Tetraglycidyl Epoxy Reinforced with Amine Functionalized Graphene Oxide (F-Go) and It’s Nanocomposites
Abstract: AbstractTGDDE matrix material along with functionalized graphene oxide (F-GO) as reinforcement was used to develop a unique skeletally modified tetra functional epoxy nanocomposites. Amine functionalization of graphene oxide nanoparticles (F-GO) on its surface was achieved by grafting 3-aminopropyltriethoxysilane (APTES) as coupling agent. The FT-IR spectrum revealed that the silane coupling agent was covalently bonded to the surface of graphene oxide nanoparticles, offering better dispersibility and compatibility with TGDDE epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 3, Issue 2, 2015 · pp. 39–51 Read article
-
Characterization of Glass/Jute Hybrid Fibre Reinforced Epoxy Composite for Axial Flow Fan Blade
Abstract: Traditionally axial flow fan blades were manufactured by using metal alloys, but with the increase in blade size the blades grew heavier resulting in more vibrations during its working. It is impossible to manufacture the metallic blades to close tolerances making it uneconomical. Due to this dimensional instability, the metallic impeller fan blades are instead fabricated with glass fiber reinforced plastics (GFRP). To reduce the after effects of GFRP blades …
Published in Journal of Polymer & Composites · Vol. 7, Issue 3, 2019 · pp. 32–43 Read article
-
Novel Porous Refractory Synthesized from Diatomaceous Earth and Rice Husk Ash
Abstract: Refractory materials are products used in thermal equipment to protect the fire and prevent heat loss to the outside environment. Thermal equipment such as driers, ceramic kilns, glass or metal furnaces and others always consume high heat in the combustion of the fuel. If the thermal equipments have high heat loss which cause wastes of fuel and increases production costs. Therefore, researchers are always looking for a solution to minimize …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 128–137 Read article
-
Microstructural Characteristics and Mechanical Properties of the Green Composites Reinforced Bamboo Optimized the Treated Parameters
Abstract: Concrete and steel are traditional building materials with high strength and stress. They are usedeffectively in civil construction, structures of bridges and others. According to the current trend, theconstruction materials have more attention for low density and high durability which produced fromnatural materials; moreover, they are able to be recycled and reused. In this study, the green compositeswere fabricated based on the highly performance epoxy combined with bamboo to get …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 28–38 Read article
-
Studies on Development of a Super Adsorbent Polymer for the Removal of Nitrogenous Waste Products from Urine Samples and in Intestinal Fluid Simulator
Abstract: Introduction: Colonic dialysis (CD) has been proposed as an appropriate candidate for excretion of electrolytes, nitrogen waste products and excessive fluid using gastrointestinal (GI) tract. Methods: The GI environment simulated in terms of concentrations of nitrogenous waste products, electrolytes, temperature and pressure. In addition, 24-hour urine samples were obtained from 10 healthy adult volunteers. Adsorbing capacity of Super Adsorbent Polymer (SAP) evaluated in GI tract simulating system and urine samples. …
Published in Journal of Polymer & Composites · Vol. 10, Issue 2, 2022 · pp. 1–7 Read article
-
Extended Switched Inductor Quasi Z Source Inverter for Photovoltaic Applications
Abstract: A novel extended switched inductor quasi Z source inverter is proposed in this paper for better voltage boosting with improved power factor and reliability. The operation of the proposed inverter is described with its equivalent circuit explaining operating states such as shoot through and non-shoot through states and outlining the relationship between output voltage, total harmonic distortion and power factor. Simple boost scheme is used for switching actions of the …
Published in Journal of Power Electronics and Power Systems · Vol. 7, Issue 2, 2017 · pp. 14–23 Read article
-
Determination of the Optimal Generation Location using Particle Swarm Optimization
Abstract: This paper presents an optimization approach to determine the optimal location for installing a new generator in which the technical, economic and environmental aspects are all taken into consideration. The location that yields the minimum fuel costs, emission and system loss is considered as the optimal generation location. The formulated objective function and its constraints compose an optimization problem, which is solved using particle swarm optimization (PSO). The proposed PSO-based …
Published in Journal of Power Electronics and Power Systems · Vol. 2, Issue 2, 2012 · pp. 34–44 Read article
-
Design a Patch Antenna with Metamaterial for Electromagnetic Interference Sensor
Abstract: This paper proposes a design of a patch antenna by using pentagonal shaped metamaterial for Electromagnetic interference sensor. Pentagonal shaped metamaterial is used to increase bandwidth of patch antenna. Metamaterial possesses properties such as negative permittivity and negative permeability. It reduces return loss of antenna and increases the directivity. Two identical rectangular patch antennas have designed for transmitting and receiving purpose. This proposed antenna has been simulated at 2GHz frequency …
Published in Journal of Power Electronics and Power Systems · Vol. 3, Issue 1, 2013 · pp. 18–21 Read article
-
Evolutionary Particle Swarm Optimization (EPSO) based technique considering Voltage Stability Margin for Reactive Power Reserve Optimization
Abstract: Reactive power reserve and voltage stability are one of the important parameters required for proper operation of the electrical power system. Voltage stability covers a broad span of phenomena in power systems and its applications. Voltage stability is defined as ability of power system to assist fixed bearable potential at every single bus of the system under standard operating conditions and when put through to a disturbance. At any instant …
Published in Journal of Power Electronics and Power Systems · Vol. 11, Issue 2, 2021 · pp. 36–41 Read article
-
Safety climate status in oil and gas industries: A review of the literature
Abstract: Safety is a very critical concept which needs to be followed in all the industries. In order to remove the confusions related to safety climate in the oil and gas industries, a total of 14 papers are reviewed to disambiguate the concept of safety climate and remove the confusions regarding safety climate in the oil and gas industry. The papers considered here cover twenty-three years of safety climate research and …
Published in Journal of Petroleum Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 24–30 Read article
-
Oil Price Volatility
Abstract: Over the last 14 months, the average price of oil has gone down by about 60%. Oil prices fluctuate for a numerous of reasons. To name few are like, rise in global economic activity can bring demand and hail prices higher, while increasing production rates can cause prices to decline as well. Although simple, economic supply and demand tales are useful in describing the oil price movements. Keywords: Oil, price, …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 12–14 Read article
-
Development of Coalbed Methane in India: Comparison with Global CBM basins
Abstract: Gas consumption in India has grown at an annual rate of 10% from 2001–2011. To meet an increase in gas demand, India needs to develop unconventional gas resources like coal bed methane (CBM) and shale gas. India has 91 trillion cubic feet (Tcf) of CBM resource. To develop CBM resource in India, CBM policy was frame in 1997 and first round of bidding took place in 2001. Till the end …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 25–40 Read article
-
New Integral Processes Enrichment of Moroccan Oil Shale using Mineral and Hydrometallurgical Methods
Abstract: In this work, we increase the calorific value of Moroccan oil shale, which is the main element in the combustion of fossil fuels. In particular, we consider the shale of Timahdit, enriching it by hydrometallurgical and mineral processing methods in order to use it to generate thermal and electrical energy. Although different studies have been conducted for the development of Moroccan oil shale, but they have not dealt with the …
Published in Journal of Petroleum Engineering & Technology · Vol. 1, Issue 1-3, 2011 · pp. 28–36 Read article
-
Simulation and Optimization of Syngas Generation Process (GTL Stage I) using ASPEN Hysys
Abstract: The process of gas to liquid (GTL) conversion has been divided into three sections (section I: natural gas treatment and syngas production; section II: is Fischer Tropsch Synthesis sections (Main Reactors) and Stage III: Upgrading and treatment section).This work is mainly for Stage I. whereby Natural gas dehydration unit is simulated using Tri-ethylene Glycol to dehydrate the natural gas which includes (Free Water Knockout Drum (FWKD), Absorber and Distillation). Sweetening …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 48–67 Read article
-
Polystyrene Plastic Waste into Liquid Fuel Using Silica-Alumina Catalyst, Extracted from Rice Husk
Abstract: Catalytic Pyrolysis of Polystyrene (PS) into fuel like products using silica alumina catalyst that was extracted from rice husk was investigated over temperature range of 430–470°C. The output of catalytic pyrolysis was liquid oil, solid residues (char) and gaseous fraction. The product yields as a function of temperature, time and catalyst amount were studied. High conversion of liquid (48.8%) was achieved at 430 and 450ºC in the presence of 12.5 …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 15–31 Read article
-
Feasibility Study of using Electric Down-hole Heating to Improve the Productivity for a Heavy Oil Field
Abstract: The largest hydrocarbon reserves around the world are mostly heavy oils. Electrical Down-hole Heating (EDH) is a widely used technique for heavy oil production; when it is combined with Enhanced Oil Recovery (EOR) methods, it can overcome its limitations. Considering limited previous studies for the designing of EDH for Sudanese fields, this paper presented the feasibility of using this system by simulating the actual well situation and provided several scenarios …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 52–68 Read article