Search
553 articles for “Electronic property”
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Sonochemical Synthesis of SrBaFexMo2-xO6 (x=1.0, 1.1, 1.3 and 1.4) Double Perovskites: Characterization and Magnetic Properties
Abstract: This work investigates ultrasound assisted synthesis, characterization and magnetic properties of SrBaFexMo2-xO6 (x=1.0, 1.1, 1.3 and 1.4) double perovskites. X-ray diffraction (XRD) analysis confirmed proposed that samples are in single phase. It was found that lattice constants decrease with increase in composition x. Morphology of all samples was examined by Scanning Electron Microscopy (SEM) images. Energy Dispersive X-ray Spectroscopy (EDS) data confirmed purity and nonexistence of foreign elements in prepared …
Published in Research & Reviews : Journal of Physics · Vol. 7, Issue 2, 2018 · pp. 8–17 Read article
-
Nano Shield-EV: Graphene and CNT-Infused Polymer Composites for Advanced EMI Shielding in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for lightweight, thermally stable, and mechanically robust electromagnetic interference (EMI) shielding materials to ensure the reliable performance of advanced electronic systems. Traditional metallic shields, though highly effective, increase vehicle weight and restrict design flexibility, thereby motivating the search for multifunctional polymer-based alternatives. In this study, NanoShield-EV introduces novel polymer nanocomposites fabricated via melt blending and compression molding, combining engineering-grade …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1036–1047 Read article
-
Synthesis of Magnetically Recoverable Nickel (II) Complex-Functionalized Fe3O4@ISNA (ISNA= Isonicotinic acid) Nanomaterials: Catalytic Studies on Nitrophenol Reduction and TD- DFT Studies
Abstract: In this study, we aimed to develop a novel, environmentally sustainable, and magnetically separable heterogeneous nanocatalyst, denoted as Fe3O4@ISNA@NiL (where L represents the ligand). The synthesis involved a two-step process, first, isonicotinic acid was chemically grafted onto the surface of iron oxide nanoparticles (Fe3O4) to introduce functional groups capable of further chemical modification. Subsequently, a nickel(II) Schiff base monomeric complex was anchored onto the modified surface, resulting in a nanocatalyst …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 88–96 Read article
-
Synthesis of Magnetically Recoverable Nickel (II) Complex-Functionalized Fe 3 O 4 @ISNA (ISNA= Isonicotinic acid) Nanomaterials: Catalytic Studies on Nitrophenol Reduction and TD- DFT Studies
Abstract: In this study, we aimed to develop a novel, environmentally sustainable, and magnetically separable heterogeneous nanocatalyst, denoted as Fe 3 O 4 @ISNA@NiL (where L represents the ligand). The synthesis involved a two-step process, first, isonicotinic acid was chemically grafted onto the surface of iron oxide nanoparticles (Fe 3 O 4 ) to introduce functional groups capable of further chemical modification. Subsequently, a nickel(II) Schiff base monomeric complex was anchored …
Published in Journal of Polymer & Composites · Vol. 12, Issue 9, 2024 Read article
-
Solid State Studies of Chitosan and Starch Blend Films
Abstract: In this study blend films of Chitosan and starch were prepared by conventional solution-casting technique. Their miscibility was characterized by scanning electron microscopic (SEM) technique and Intermolecular interaction in blend system was investigated by Fourier Transform Infrared Spectroscopic (FTIR) technique. SEM and FTIR measurements revealed that Chitosan/starch blends were miscible. Thermal properties of different blend compositions were assessed by Thermo Gravimetric Analyzer (TGA) and increase in the thermal stability of …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 4, Issue 3, 2013 · pp. 11–18 Read article
-
Synthesis and Characterization of Al-Mg-Si Alloy based Hybrid Composite Reinforced with SiC and Graphite
Abstract: The present work is carried out to investigate the mechanical properties of Al-Mg-Si alloy matrix based hybrid metal matrix composites (MMCs) using stir casting method owing to its popularity and large scale productions. SiC and graphite reinforcements were added each with 1%, 2%, 3% and 4% respectively to fabricate four composites specimens. X-ray diffractometer and scanning electron microscope were used for phase identification and microstructure characterization (SEM). Density, hardness, compressive …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 9–19 Read article
-
Synthesis and Structural Characterization of Nanocrystalline CeO2 and Ce0.95Cu0.05O2 Solid Solution Catalysts: Properties and Applications
Abstract: The main study and the development of CeO2 and Cu-doped CeO2 nanocrystals containing transition- metal species are of crucial importance for understanding the preparation and fabrication of CeO2 and Cu-doped CeO2 nanoparticles by solution combustion technique to taken glycine as fuel. The structural properties of Ce1-xCuxO2 nanocrystals were examined by investigating the influence of cerium dioxide and Cu dopant ions. The CeO2 single-phase cubic system was successfully incorporated with Cu …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 3, 2024 · pp. 29–38 Read article
-
Comparative Study of Structural and Ionic Properties of Doped Zirconia Electrolytes for Solid Oxide Fuel Cells
Abstract: The current study looks at yttria and scandia doped zirconia electrolytes for application in solid oxide fuel cells. Samples with (i) 10 mol% yttria, (ii) 5 mol% yttria and 5 mol% scandia, and (iii) 10 mol% scandia in zirconia host lattice were prepared by mixed oxide method and were sintered by conventional heating at 1400°C for six hours. The samples were then analysed by X-ray diffraction (XRD) and scanning electron …
Published in Research & Reviews : Journal of Physics · Vol. 7, Issue 2, 2018 · pp. 1–7 Read article
-
Evolution of Structural Dynamic Modeling Technique for Airborne Chassis
Abstract: To estimate random vibration response of airborne chassis finite element method is used as a tool. For making an appropriate requirement to determine the design requirement of the package for a designer the point of accuracy is very much linked to this prophecy. The modeling practices which are used in FEM are linked to attain preciseness in any considered prediction. Preciseness of a particular FE model is inclined with appropriate …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 3, 2016 · pp. 12–17 Read article
-
Nanostructure-Induced Thermoelectric Enhancement in Bi2Te3 Nanorod Design, Analysis, and Performance Evaluation
Abstract: Thermoelectric materials capable of efficient energy conversion near room temperature are critical for waste heat recovery applications. In this work, solution-grown Bi2Te3 nanorods were synthesized via a trioctylphosphine-assisted thermal decomposition route, and the influence of surfactant-induced nanostructuring on their thermoelectric properties was systematically investigated. Structural analysis using X-ray diffraction and Rietveld refinement confirmed the formation of rhombohedral Bi2Te3 with the emergence of Bi2Te3–BiTe nanocomposites at higher surfactant concentrations. Electron microscopy …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 2, 2026 · pp. 26–37 Read article
-
Surface Properties of Magneto Plasmons on the Surface of Carbon Nanotubes (CNTs)
Abstract: The theoretical study of Raman Spectroscopy of CNTs showed that on increasing the diameter of both semiconducting and metallic carbon nanotubes, the energy separation between valence band and conduction band decreases. In this review paper, the author also compares the obtained results with others and it is found that the result is in good agreement but the magnitude is slightly less. The experimental result of Raman Radial Breathing Mode (RBM) …
Published in Research & Reviews : Journal of Physics · Vol. 9, Issue 2, 2020 · pp. 1–5 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Hybrid Polymer Composites Reinforced with Coconut Shell Fillers and Silica Fume: Synergistic Effects of Industrial By-Products: A Comprehensive Review
Abstract: The increasing requirement of sustainable and high-performance engineering materials has led to increased research in hybrid polymer composites comprising sustainable fillers in the form of renewable biomass or industrial by-products. Among the various bio-fillers that exist, coconut shell filler is gaining much prominence due to its low density, high content of lignin, hardness, and abundance as agricultural waste. Another industrial by-product that is rich in amorphous silica and possesses high …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1296–1307 Read article
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Preparing Chitosan Hybrid Nanocomposites by Novel Additives for Wound Healing
Abstract: Biomaterials made from chitosan have been discovered to be particularly unique marine polysaccharides (or polycarbohydrates) with a wide range of physico-chemical and biological characteristics suitable for biomedicine field. Due to net positive charge of chitosan, it is essentially capable of chemically binding with negatively charged surfaces A biodegradable blend of chitosan nanoparticles (CHT), poly vinyl alcohol (PVA) and polyethylene glycol (PEG) hybridized with metal oxides nanopowders were prepared and used …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 9–23 Read article
-
Experimental Investigation and Surface Morphology Study on Areca Fiber Composite Material
Abstract: Composites manufactured from areca fibers had their characteristics assessed in recent research. Shape and size were determined by cutting the stem. It takes six months to dry the fibers once they are taken from the tree stem. Because pectin, cellulose, hemicellulose, and lignin make up the bulk of it. It has great regeneration capacity and is a resource material made of wood fibers. The untreated and chemically treated fibers are …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 459–468 Read article
-
Comparison Analysis of Transformer Boosting and Induced Degeneration Topology Design of LNA for Millimeter Wave Frequency Range Using Polymeric Substrates
Abstract: In this study, a comparison between transformer boosting and source degeneration LNA topologies is conducted using two polymeric substrates—Polyimide (PI) and Liquid Crystal Polymer (LCP)—for millimeter-wave (mmWave) applications. With growing interest in flexible and high-frequency electronics, polymeric materials offer unique advantages such as low dielectric constants, mechanical flexibility, and thermal stability. The analysis explores gain, return loss, and noise figure performance while evaluating the influence of dielectric properties on the …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 2, 2025 · pp. 1–24 Read article
-
Facile Synthesis of SnO2/g-C3N4 nanocomposite for the photocatalytic degradation of Methylene Blue dye under visible light irradiation
Abstract: This work reports the nanoscale samples of pure tin dioxide (SnO₂), graphitic carbon nitride (g-C₃N₄), and their composite (SnO₂/g-C₃N₄) were successfully synthesized using the co-precipitation technique. The synthesized materials were extensively analyzed using multiple characterization techniques such as Powder X-ray Diffraction (PXRD), High-Resolution Scanning Electron Microscopy (HR-SEM), Energy-Dispersive X-ray Spectroscopy (EDAX), Fourier Transform Infrared Spectroscopy (FTIR), UV-Visible Spectroscopy, and High-Resolution Transmission Electron Microscopy (HR-TEM). Results from PXRD and EDAX confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1835–1845 Read article
-
A Review of Electrical Conduction, Optical Sensing, and Semiconductor Device Innovations
Abstract: Electrical conduction and semiconductor device technologies form the backbone of modern electronic and sensing systems. This review presents a comprehensive analysis of conduction mechanisms across different materials, including conductors, semiconductors, and insulators, with particular emphasis on charge carrier behavior, resistivity, and energy band structures. The study highlights how variations in material properties and external conditions influence electrical performance and device efficiency. The paper further explores advancements in semiconductor devices, focusing …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 1, 2026 · pp. 10–18 Read article