Search
524 articles for “crystallization”
-
Gas Sensors Fabricated using Carbon Powder Derived from Dried Banana Peels Waste to detect Methanol, Ethanol, Acetone Vapors and Carbon Dioxide Gas
Abstract: Low cost and environmentally friendly activated carbon powder was synthesized using waste banana peels. Phosphoric acid was utilized as activation agent. Doctor blade method was employed to fabricate films of activated carbon on conductive or nonconductive glass substrates. Films were subsequently annealed at 70 0C for 30 minutes in air. According to XRD patterns, single phase of activated carbon was crystallized in thin film form. Carbon prepared from banana peels …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 14–25 Read article
-
CdS-Based Photocatalytic Nanostructures: A Promising Material for Various Environmental Applications
Abstract: Modern technological and industrial progress has significantly increased the use of chemicals in product development, leading to greater contamination of water sources by conventional pollutants (such as organic dyes and heavy metals) and harmful microorganisms. Wastewater treatment processes now reveal “emerging pollutants,” including pharmaceuticals, endocrine disruptors, and agricultural chemicals. Certain emerging pollutants, though harmless in some cases, can pose serious risks to various organisms. To address this, researchers are exploring …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 1, 2025 · pp. 33–53 Read article
-
Synthesis of Thermal Resistant and Transparent Al2O3 Reinforced Epoxy-Based Composite Coatings
Abstract: This study explores the influence of thermal treatment on the structural, optical, and surface wettability characteristics of epoxy-based composite coatings reinforced with 3 wt.% aluminum oxide (Al₂O₃) nanoparticles. The coatings were synthesized via a dip-coating method on carbon fiber substrates and subjected to controlled thermal treatments at 300 °C, 400 °C, and 500 °C to assess their thermal resilience. X-ray diffraction (XRD) analysis confirmed the structural integrity of the composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 178–183 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Viscoelastic Behavior and Wrinkle Formation in Cotton- Polyester Garments: A Data-Driven Approach for Textile Care
Abstract: This study investigates the wrinkle behavior of cotton-polyester blended fabrics by analyzing data from over 1,200 store-handled garments. Integrating concepts from polymer chemistry and computer vision, it aims to establish a smart textile care framework based on fiber-specific wrinkle characteristics. The research identifies how cotton’s hydrophilic and non-elastic structure results in increased wrinkling, while polyester’s thermoplastic and crystalline properties enhance wrinkle resistance. Elastomeric fibers like Lycra contribute to wrinkle recovery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 50–60 Read article
-
Smart Bank Locker Security System
Abstract: This paper introduces a smart bank locker security system that aims to improve the reliability and security of locker access in banks. The system has a Raspberry Pi 4B as the controller, with face detection and fingerprint scanning used for dual-factor authentication. The fingerprint scanner and facial recognition unit identify the user's identity prior to access. After successful verification, a relay is triggered to open the locker. A liquid crystal …
Published in Journal of Electronic Design Technology · Vol. 16, Issue 2, 2025 · pp. 31–36 Read article
-
Engineering Sustainable Interior Materials: Performance Analysis of PLA Composites Reinforced with Banana Stem Fiber and Spent Coffee Grounds
Abstract: This study presents the development and classification of eco-friendly composite panels reinforced with spent coffee grounds (SCG) and banana stem fibers (BSF) for interior applications. Hybrid composites were fabricated using polylactic acid (PLA) as the matrix with a constant filler loading of 30 wt%, varying BSF:SCG ratios (70:30, 60:40, 50:50). Mechanical testing revealed that the 70:30 composite exhibited the highest tensile strength (42 MPa) and flexural strength (58 MPa), whereas …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 94–105 Read article
-
Enhancement of Gas Sensitivity of Composites of Carbon Derived from Rubber Tree and SnO2 to Detect Ethanol Vapor at Room Temperature
Abstract: Films of composites of activated carbon powder prepared from saw dust derived from core of rubber tree (Hevea Brasiliensis) and tin oxide (SnO2) were fabricated using the doctor blade method. Carbon powder was activated using phosphoric acid at 500°C for 45 minutes. The weight ratio carbon/SnO2 varied from 0 to 12% in steps of 2. The structural, optical and morphological properties of films were investigated using XRD patterns, UV-visible spectrums …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 31–44 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Effect of Bi2O3 Content and Sintering Temperature on the Frequency-Dependent Magnetic Properties of Nanosized Barium Hexaferrite
Abstract: The magnetic properties of commercially available nanosized barium hexaferrite (BaFe12O19) are studied. The particles were characterized using X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and high-frequency magnetic measurements. The frequency-dependent magnetic properties viz. complex permeability and loss tangent were analyzed within the 10 MHz to 1 GHz range. Variations in complex magnetic permeability and loss tangent were discussed under varying sintering parameters such as temperature and sintering aid content. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 107–113 Read article
-
High-Performance Biodegradable Films from Bamboo Derived Cellulose Nanofibers and Silk Fibroin: Engineering Sustainable Polymer Composites
Abstract: This research presents the advancement of biodegradable composite films from cellulose nanofibers (CNFs) extracted from bamboo and silk fibroin (SF) derived from Bombyx mori cocoons. CNF/SF composites were fabricated in three different compositions—CS10, CS30, and CS50—via aqueous blending and solution casting, followed by ethanol-induced β-sheet stabilization. Mechanical testing confirmed a considerable enhancement in tensile strength from 72 MPa (CS10) to 112 MPa (CS50), while Young’s modulus improved from 2.4 GPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 256–265 Read article
-
Exploring Polymer Biocomposite as a Sustainable Filter for Water Treatment
Abstract: The present study explores the utilization of polylactic acid (PLA), a renewable polymer combined with surface-modified nanocellulose (SMNC), and pectin derived from Borassus flabellifer leaves and fruits respectively. Existing methods of filtration are synthetic and affect the environment and public health at an alarming rate thereby making biopolymer-based membranes a greener and effective approach for water treatment. PLA-SMNC-pectin biofilm was fabricated using 88.5 mg PLA, 3.5% (wt. % of PLA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 594–608 Read article
-
Solid acidity of MoO3 synthesized by solution combustion method and acetalization of formaldehyde using it
Abstract: MoO 3 nanoparticles were synthesized via solution combustion approach. Ammonium nitrate was used as oxidant and ammonium molybdate as fuel in combustion reaction. XRD, FTIR and Raman spectroscopy results showed that MoO 3 nanoparticles were successfully synthesized by the solution combustion reaction. The SEM analysis showed that synthesized MoO 3 nanoparticles have rod-like shape with width and thickness of 50-200nm and length of 0.2-1μm, respectively. The XRD pattern and morphology …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 3, 2025 · pp. 01–09 Read article
-
Conductive Polymers for Electro-Mechanical Systems: Structure–Property Relationships and Mechanical Behavior Under Stress
Abstract: Conductive polymers represent a unique class of functional materials that combine the electrical characteristics of metals with the mechanical flexibility of polymers. These dual properties are critical for the next generation of electro-mechanical systems, including wearable sensors, soft robotics, structural health monitoring (SHM), and biomedical actuators. However, the mechanical performance of conductive polymers under diverse stress conditions—such as elongation, cyclic loading, bending, and impact—remains a key challenge, limiting their long-term …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 25–30 Read article
-
IoT Based Wireless Data Monitoring System with TFT LCD
Abstract: This study introduces the design, development, and implementation of an Internet of Things (IoT)-based wireless data monitoring system that utilizes a Thin-Film Transistor Liquid Crystal Display (TFT LCD) for real-time visualization. The system is engineered to collect, transmit, and display sensor data wirelessly, making it suitable for a range of practical applications such as industrial automation, healthcare monitoring, and environmental observation. The key goal of this work is to enhance …
Published in Journal of Artificial Intelligence Research & Advances · Vol. 12, Issue 3, 2025 · pp. 10–18 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Role of Strontium in Structural and Dielectric characterstics of Barium Titanate
Abstract: Ba₀.₇₅Sr₀.₂₅TiO₃ (BST) compound was synthesized through the conventional solid-state reaction methodology, aimed at investigating its structural, microstructural, and dielectric characteristics. The structural characterization was executed employing X-ray diffraction (XRD), and the resultant diffraction patterns were refined utilizing the Rietveld method, which substantiated the establishment of a single-phase perovskite configuration exhibiting tetragonal symmetry and belonging to the P4mm space group. The refined lattice parameters revealed subtle distortions correlating with the substitution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1157–1163 Read article
-
Synthesis of Silver Nanoparticles of Cissus Quandrangularis and It’s Virtual Screening Against Gastric Cancer
Abstract: Gastric cancer, also known as stomach cancer, is the third leading cause of cancer-related deaths globally and remains a major health challenge due to its poor prognosis and high mortality, largely attributed to late-stage diagnosis. In this context, plant-based nanomaterials are gaining momentum for targeted therapeutic applications. Cissus quadrangularis, a medicinal plant native to India from the Vitaceae family, is traditionally used for its diverse healing properties. Its stem, in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1551–1569 Read article
-
Multifunctional and Photocatalytic Properties of DyFeO₃/Dy₃Fe₅O₁₂ Biphasic Nanoparticles
Abstract: Rare-earth orthoferrites constitute a class of compounds that exhibit remarkable magnetic, optical, and electronic properties across a wide temperature range. In the present study, a dysprosium-based orthoferrite containing dual phases of DyFeO₃ perovskite and Dy₃Fe₅O₁₂ garnet was successfully synthesized via the co-precipitation technique. X-ray diffraction (XRD) analysis was employed to investigate the structural configuration of the synthesized material. The diffraction pattern confirmed the formation of a biphasic composite comprising orthorhombic …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 41–54 Read article