Search
1954 articles for “Performance” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Performance Analysis And Battery Management System Optimization In Electric Vehicles
Abstract: The rapid electrification of the automotive industry has led to an increased need for battery management systems that are not only efficient and safe but also intelligent. BMS is the device that guarantees the best use of the battery, prolongs its life, and allows its safe operation even under different environmental and load conditions. Through the synthesis of literature and industry practices, this paper acts as a tribute to the …
Published in Journal of Control & Instrumentation · Vol. 17, Issue 1, 2026 Read article
-
Enhancing Construction Safety Performance Through Artificial Intelligence: A Systematic Review
Abstract: The construction industry is still one of the most dangerous sectors globally because of its dynamic working environment, the employment of heavy machinery, and the complexity of operational processes. Traditional safety management methods are largely dependent on manual monitoring and reactive measures, which are not always effective for accident prevention. In recent years, Artificial Intelligence (AI) has been recognized as a revolutionary technology in construction safety, with capabilities such as …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 1, 2026 · pp. 13–30 Read article
-
Magnetorheological Composite Dampers for Railway Wagon Suspension: Modelling Validation and Performance Analysis
Abstract: Railway wagons encounter continuous vibrations due to track irregularities, resulting in reduced ride comfort and higher dynamic loads. Conventional suspension systems based on springs, hydraulic dampers, or air suspensions provide only limited vibration mitigation. This work investigates the application of magnetorheological (MR) fluid-based dampers, where a polymeric carrier oil (silicone oil) reinforced with carbonyl iron particles serves as a smart composite suspension medium. The MR fluid is synthesized and characterized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 43–63 Read article
-
Design, Development, and Performance Analysis of an Intelligent IoT-Based Home Automation System
Abstract: Without a doubt, the incorporation of Internet of Things (IoT) technology into what used to be traditional homes has turned them into smart houses. Appliances are controlled and monitored in the distance. With a security of 99.9% it is unproblematic to break in these terminals and your energy synchronously may go down two points any time fifty times." "Home automation systems allow automatic control of electrical appliances, environmental conditions and …
Published in International Journal of Advanced Control and System Engineering · Vol. 4, Issue 1, 2026 · pp. 23–30 Read article
-
Effect of Aging on the Performance of Polymer Composite: A Review
Abstract: The exceptional robustness, corrosion resistance, and lightweight design, polymer composites (PCs) are crucial to modern engineering escalating the utilization of polymer composite in structural applications including aerospace engineering, automobile engineering, etc. With a greater number of positive aspects, the polymer composite also deteriorate by different environment conditions with their exposing duration considered as aging of polymer composites. However, a variety of elements influencing the ageing process determine their long-term performance. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 752–768 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Characterization and Performance of a Multiphase Lignocellulosic-Polymeric Composite Growth Media in an IoT-Automated NFT Hydroponic System
Abstract: Hydroponics utilizing the Nutrient Film Technique (NFT) entails a type of soilless agriculture involving the delivery of a continuously flowing and thin film of nutrient-filled solution onto the roots of plants. With the move toward sustainable and efficient urban agriculture in the contemporary world and need to produce more effective and resource-efficient solutions, there have been significant efforts aimed at improving these techniques through advanced materials and automation. A consistent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 542–555 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article
-
Polymer-Coated Composite Granules of Clarithromycin: Design, Characterization, and Functional Evaluation for Taste Masking and Antibacterial Performance
Abstract: Background: Masking the unpleasant taste of clarithromycin is essential to improve patient adherence, especially among pediatric and elderly groups. However, enhancing palatability while maintaining its antibacterial effectiveness remains a significant formulation challenge. This study focused on developing polymer-coated clarithromycin granules (B1–B10) using novel non-sugar-based polymers and assessing their antibacterial activity against Staphylococcus aureus Methods: Clarithromycin granules were produced using a fluidized bed coating technique with non-saccharide polymers, specifically Eudragit E-100 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1042–1050 Read article
-
Water Chestnut Stem-Derived Biochar Supported AgNPs/AC-CTS-PVA Composite Gel for Wastewater Treatment and Potent Antibacterial Performance
Abstract: In the present study, green and efficient Ag-NPs functionalized activated carbon/chitosan-polyvinyl alcohol (AgNPs/AC-CTS-PVA) composite gel was successfully synthesized using water chestnut stem-derived biochar for wastewater treatment and antibacterial applications. The composite was characterized by FTIR, XRD, SEM-EDX, and TGA analyses, confirming the successful incorporation of crystalline Ag nanoparticles within the polymeric matrix and improved thermal stability. The material was tested regarding the removal of the dye of methylene blue (MB) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1129–1144 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
Analysis of a Communication Link Performance Across Various Rayleigh Channels in Tropical Climates
Abstract: Tropical regions are characterized by intense and persistent rainfall throughout most of the year, and this environmental condition significantly influences wireless communication performance. The continuous presence of heavy precipitation weakens, scatters, and disrupts radio frequency signals, causing noticeable attenuation during transmission from the source to the destination. As a result, reliable communication becomes challenging, particularly for modern high-speed systems such as 5G networks. To address this limitation and enhance communication …
Published in Journal of Communication Engineering & Systems · Vol. 16, Issue 1, 2026 · pp. 06–12 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Influence of Infill Density on Structural Performance of FDM-Processed PET-G Polymer: Experimental Validation through Quadcopter Flight Testing
Abstract: Polyethylene terephthalate glycol-modified (PET-G) is an amorphous thermoplastic copolymer increasingly adopted in structural applications through fused deposition modeling (FDM). However, the correlation between FDM processing parameters, especially infill density, and mechanical performance of PET-G parts remains inadequately characterized under real-life loading conditions. This study investigates how infill density (10% and 30%, grid pattern) influences the structural integrity of FDM-processed PET-G components, validated experimentally through quadcopter airframe fabrication and flight testing. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 644–656 Read article
-
Comparative Assessment of Polymers and Composites for Solar Panels: Fundamentals, Performance Metrics, Manufacturing, and Sustainability
Abstract: This paper presents a comprehensive review of the main types of Photo Voltaic polymers and composites such as crystalline silicon (both mono- and poly-Si), thin-film tech (CdTe, CIGS, a-Si), perovskites, and organic/dye-sensitized cells and analyses the parameters such as efficiency, fill factor, open-circuit voltage, temperature response, and degradation. The analysis focusses on polymers and composites and manufacturing techniques like vapor deposition, roll-to-roll printing, and both solution and vapor techniques for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 120–130 Read article
-
Design and Performance Evaluation of PLA-based Umbrella Wheels for Stair-Climbing Robotic Applications
Abstract: Staircase climbing robots require a complex design capable of navigating various stair configurations. A crucial component of such robots is the wheel mechanism. This paper focuses on the umbrella wheel mechanism and its application in staircase climbing robots. In this study, a PLA–based umbrella wheel structure is developed and fabricated using fused deposition modeling (FDM) for application in stair-climbing robots. The umbrella wheel geometry enables transformation from a circular rolling …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 808–824 Read article
-
Interfacial Performance and Structural Stability of Repaired vs. Replaced Polymer-Based Composites: A 3-Year Retrospective Analysis of 'Patch-up' Restorative Engineering
Abstract: Objective: This retrospective study aimed to evaluate the clinical longevity and interfacial success of repairing aged polymer-based composites versus complete replacement, focusing on the integration between the existing polymer matrix and the new restorative material. Materials and Methods: A retrospective clinical audit was conducted on 50 cases (n = 50) of posterior restorations with localized defects. The sample was categorized into: Group A (n = 25), where defective sites were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 180–187 Read article
-
Performance Improvement of Standalone Solar PV Pumping System Using Supercapacitor
Abstract: Two of the most pressing issues when it comes to rural communities of arid and semi-arid regions are water shortage and unstable grid electricity. Standalone solar photovoltaic (PV) pumping systems have been introduced as a clean, low maintenance alternative to diesel powered pumps, but their performance is limited by intermittent nature of sunlight and limited energy buffering capacity of conventional batteries. The paper is an investigation into the incorporation of …
Published in International Journal of Electrical Power and Machine Systems · Vol. 4, Issue 1, 2026 · pp. 54–62 Read article
-
Recyclable Vitrimer-Matrix Carbon Fibre Composites for Aerostructures: Reprocessing Efficiency and Retention of Mechanical Performance
Abstract: To begin, carbon fiber reinforced polymers (CFRP) have become an important part of the structural loading in many modern aircraft; however, due to their permanent cross-linking in thermosets, they cannot easily be restored after being retired. Vitrimers have been proposed as a solution since their Covalent Adaptable Networks (CANs), rearranged by associative exchange, may be reshaped, welded, repaired or dissolved without damaging the CFRP fibers. This paper reviews whether the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article