Search
324 articles for “Matrix Material”
-
Preparation and Characterization of PVA-MgO Nanocomposite Films
Abstract: In this work, Magnesium Oxide Nanoparticles (MgO NPs) doped with 3 g of polyvinyl alcohol (PVA) at different weight percentages (0, 2, 4, 6, and 8 wt.%) using the solvent casting method, to fabricate thin PVA-MgO nanocomposite (NC) films. These films were characterized by (i) XRD, SEM, EDX, DLS, and Zeta Potential for morphological studies, (ii) FTIR spectra and UV-Visible techniques for spectroscopic studies and (iii) DSC for thermal studies. …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 2, 2025 · pp. 40–62 Read article
-
AI-Driven Topology Optimization of Woven Fiber-Reinforced Composite Chassis Structures for Electric Vehicles Under Crash Loading
Abstract: The structural design of an electric vehicle (EV) chassis represents a unique engineering challenge to achieve minimal weight while meeting occupants' safety requirements during high-energy crash conditions without compromise to the battery housing's integrity or the geometrical constraints of the electric powertrain package. In this paper, a single framework is proposed to integrate physics-based artificial intelligence (AI) surrogate models using PINNs, CNN-accelerated topology optimization, and FEA to design woven fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 72–89 Read article
-
Advanced Polymer-Based Packaging Composite with Metal Oxide Nanofillers: Synthesis, Characterization, and Applications
Abstract: The development of high-performance polymeric composites for food packaging applications has gained significant attention in recent years due to increasing concerns about food safety, durability, and environmental impact. The increasing demand for active packaging materials that not only protect food but also extend shelf life has led to extensive research into polymer-based antimicrobial composites. Traditional packaging materials, including plastics, ceramics, and metals, often lack bioactive properties and can contribute to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 56–63 Read article
-
Viscoelastic Behavior and Wrinkle Formation in Cotton- Polyester Garments: A Data-Driven Approach for Textile Care
Abstract: This study investigates the wrinkle behavior of cotton-polyester blended fabrics by analyzing data from over 1,200 store-handled garments. Integrating concepts from polymer chemistry and computer vision, it aims to establish a smart textile care framework based on fiber-specific wrinkle characteristics. The research identifies how cotton’s hydrophilic and non-elastic structure results in increased wrinkling, while polyester’s thermoplastic and crystalline properties enhance wrinkle resistance. Elastomeric fibers like Lycra contribute to wrinkle recovery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 50–60 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Biopolymer-Based 3D Composite Scaffolds for Bone Tissue Engineering: Photothermal-Responsive Systems with Controlled Pt (IV) Prodrug Release
Abstract: Biopolymer-based composite scaffolds have attracted significant attention as multifunctional platforms at the intersection of polymer science, regenerative medicine, and cancer nanotherapy. In this study, a dual-functional scaffold was developed for simultaneous osteosarcoma treatment and bone regeneration using poly (L-lactic acid) (PLLA) reinforced with bioactive glass (BG) and integrated with a glutathione-responsive platinum (IV) prodrug system (PDA@Pt). To improve interfacial adhesion, photothermal conversion efficiency, and tumor-specific activation, the Pt (IV) prodrug …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 351–361 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
A Comprehensive Ahp-Topsis Approach For Non-Traditional Machining Process Selection In The Manufacturing Sector
Abstract: Non-traditional machining processes (NTMPs) are being used more widely in modern industry as a result of the increased use of advanced materials in that sector. Selecting the best Non-Traditional Machining Process (NTMP) is essential to a manufacturing company's success and competitiveness. One way to think of the process of choosing the best NTMP for a given machining processes application is as a multi-criteria decision-making (MCDM) problem with a lot of …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 1–8 Read article
-
Impact of Polypropylene Fibres on the Properties of Concrete
Abstract: This review paper explores the effects of polypropylene fibres on the mechanical and structural properties of concrete. The integration of short, discontinuous fibres into plain concrete enhances its post-cracking behavior and overall performance, with notable improvements in tensile strength, fracture strength, toughness, impact resistance, and flexural strength. These fibres effectively control crack propagation, increase energy absorption, and improve durability under varying loading conditions. A comprehensive analysis of prior research highlights …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 55–60 Read article
-
Using MCDM Methods in automotive industry- A Review
Abstract: In the automobile sector, choosing the best car necessitates weighing a number of factors, including cost, fuel economy, performance, safety, and environmental impact. In order to solve complicated situations that need the simultaneous evaluation of multiple conflicting aspects, Multi-Criteria Decision Making (MCDM) procedures are essential. Among the various MCDM approaches, the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and MOORA are widely recognized for their straightforward structure …
Published in Journal of Automobile Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 20–26 Read article
-
Investigation of Mechanical Properties of Hollow Bricks Incorporating Aerated Aggregates: A Polymer-Cement Composite Approach
Abstract: The rapid advancement of construction technologies has necessitated the development of lightweight, thermally efficient, and sustainable building materials. Hollow bricks, due to their inherent voids, offer substantial reductions in dead load and enhanced insulation properties. However, their mechanical performance often falls short when compared to conventional solid bricks. To address this limitation, this study explores the synergistic integration of aerated aggregates and polymer-cement composites (PCCs) in hollow brick production. Aerated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 92–105 Read article
-
Composite Fabrication by Stir-Cast for Al C355.0 With Particulates Hematite Reinforcements at Different Weight Percentages in Copper Chills with and Without Water Circulation for Mechanical and Fatigue Performance
Abstract: This study investigates the fabrication of aluminum matrix composites using the stir casting method to analyze the mechanical characterization and fatigue behavior of Al C355.0 composites reinforced with varying weight percentages of hematite particulates. The hematite content was systematically adjusted from 0 wt. % to 12 wt. % in 3 wt. % increments, with the presence of constituent elements confirmed through Energy Dispersive Spectroscopy (EDS). The incorporation of hematite reinforcement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 324–336 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Synthetic and Natural Polymer Composites in Wound Healing and Drug Delivery
Abstract: Both man-made and natural polymer mixtures have become important materials in wound repair and medicine delivery because they can be used in many ways and work well with living things. The benefits of both man-made and natural polymers are combined in these composites. They have a wide range of mechanical, chemical, and biological qualities that make them useful for many medical uses. In wound healing, polymer mixtures help tissues grow …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 466–478 Read article
-
Fabrication and Characterization of Zinc-based Alloy for Bio-implants
Abstract: Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical properties with Zinc. Implants, due to their intricate geometries are difficult to fabricate by conventional manufacturing techniques. Therefore, they are usually fabricated by Additive manufacturing and Powder metallurgy techniques. In the present work, Zinc, Magnesium, manganese and titanium are alloyed using powder metallurgy technique. Vickers micro-hardness, UTM, Zeiss microscopy and Corrosion testing using …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 1–13 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
AL6061/Al2O3-Ash Reinforced Composites: An Experimental and Statistical Study Using Ultrasonic Stir Casting
Abstract: This study presents an experimental investigation on the influence of fly ash particle size on the mechanical properties of aluminum alloy (Al6061) composites fabricated through Ultrasonic Assisted Stir Casting. Fly ash, a low-cost and low-density by-product of thermal power plants, has emerged as an effective reinforcement material due to its excellent fluidity, high filling capability, and ease of processing. It has been increasingly utilized in metal, polymer, and rubber composites …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1123–1133 Read article
-
Advancements in Nanostructured Membranes for Gas Separation: A Comprehensive Review
Abstract: Gas separation is vital in petrochemical, pharmaceutical, and environmental industries, yet traditional methods like distillation and cryogenic separation are energy-intensive and inefficient. Nanostructured membranes present a promising alternative, utilizing nanomaterials such as titanium dioxide, silica, carbon nanotubes, zeolite, and metal-organic frameworks to enhance separation efficiency and selectivity while reducing energy consumption. These membranes fall into various categories: polymeric nanostructured membranes, including mixed matrix and thin-film composites; inorganic membranes, such as …
Published in International Journal of Membranes · Vol. 1, Issue 1, 2024 · pp. 31–36 Read article
-
Experimental Investigation of Hybrid Natural Fiber Reinforced Epoxy Composites Using Banana and Sugar Palm Fibers
Abstract: This paper is a research study that examines the mechanical and morphological properties of hybrid natural fiber reinforced epoxy composites manufactured from banana fibers (BF) and sugar palm fibers (SPF). Because the use of sustainable, lightweight, and cost effective materials in engineering continues to grow, many engineers are looking at the possibility of utilizing natural fiber reinforced polymer composites as alternatives to traditional man-made fiber composites. Hybrid composite laminate samples …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 195–205 Read article