Search
372 articles for “Cast”
-
Method of Analysis for Chloride Distribution in Concrete from Torrent Data
Abstract: Design w/c ratio becomes less important than achieved cover performance in the case of existing structure. Therefore, inspection data of chloride profile from some real structures do not always obey the rule of Fick’s law, suggesting the influence of a new parameter. In this study, chloride ion profiles and behavior of penetrating water for normal, fly ash and slag concrete with w/c ratio as 40, 55, and 70%, respectively, cast …
Published in Journal of Construction Engineering, Technology & Management · Vol. 4, Issue 3, 2014 · pp. 10–19 Read article
-
Experimental Study on Fibre Reinforced High Performance Concrete with Silica Fume
Abstract: This paper presents the effect of silica fume and glass fibre in High Performance Concrete (HPC). In this study, High Performance Concrete mixes with silica fume of 0, 10, and 20% with addition of glass fibre of diameter 14 μ and 12 mm length at various percentages as 0, 0.3, and 0.6% by the volume of cement on M75 grade of concrete. The mix proportions of concrete had a constant …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 1, 2013 · pp. 26–30 Read article
-
Experimental Investigation of Mechanical Properties of Hybrid Fiber (Basalt and Steel) Reinforced Concrete
Abstract: The paper reports experimental investigations on hybrid-reinforced concrete. The proportion of basalt fiber and steel fiber was 50% respectively of the total fiber taken as sample. Effect of fiber on various strengths of concrete is studied. Fiber content varied from 0 to 4% at an interval of 1% by weight of cement. Various considerations for investigation are compressive strength, flexural strength, split tensile and bond strength. Cube of size 150 …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 2, 2013 · pp. 5–10 Read article
-
Performance of High Strength Basalt Fiber Reinforced Metakaolin Concrete
Abstract: The present work deals with the results of experimental investigations on high strength M60 basalt fiberreinforced metakaolin concrete. Effect of these fibers on various strengths of concrete are studied. Fiber contentvaried from 0.5 to 1.5% at an interval of 0.5 by weight of cement. Various strengths considered for investigationare compressive strength, flexural strength, split tensile, and bond strength. Cube of size 100 mm forcompressive strength, beams of size 500 mm …
Published in Journal of Construction Engineering, Technology & Management · Vol. 1, Issue 1-3, 2011 · pp. 15–22 Read article
-
Comparison of the Compressive Strength of Concrete Made with Palm Kernel Shell and Gravel as Coarse Aggregates
Abstract: The investigation of alternative materials for the construction, comparison of the compressive strength of concrete made with palm kernel shell as coarse aggregate and concrete made with gravel. A mix proportion of 1:2:4 with water cement ratio of 0.6, ordinary Portland cement, PKS, gravel and sand were used for this research. 24 cubes were cast and tested for compressive strength at 7, A14, 21 and 28 days. The result showed …
Published in Journal of Construction Engineering, Technology & Management · Vol. 12, Issue 1, 2022 · pp. 12–18 Read article
-
Fabrication and Optimization of Process Parameters for Friction Stir Welding AA7075+10%wt.SiC Composite by Taugchi Method
Abstract: Aluminium alloy 7075 as matrix and silicon carbide (SiC) as reinforcement has been widely used in aircrafts and space industries because of high strength to weight ratio. Fusion welding of this Aluminium Metal Matrix Composite (MMC) will lead to many problems such as porosity, micro-fissuring and hot cracking. However, friction stir welding (FSW) can be used to weld this MMC without above mentioned defects. Objective of this investigation are fabrication …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 102–112 Read article
-
Characterization of Aluminum Metal-Matrix Composite with SiC and B4C Reinforcement with Different Weight Percentage
Abstract: Metal Matrix Composites (MMCs) have been prepared by compo casting method. The effect of matrix material on the wettability/compatibility of refinement with matrix is studied. Silicon and boron ceramic particles were used as reinforcement in aluminum matrices. The study of density, micro-hardness and the tensile strength has been done in order to characterize the same. It is found that Al-SiC MMC shows an increase in density with increasing weight percentage …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 1, 2015 · pp. 1–6 Read article
-
Effect of Steel Slag and Bagasse Ash on Strength of Concrete
Abstract: An experimental investigation was carried out to evaluate the strength properties of concrete. The concrete mix of M-50 grade was designed and produced by replacing steel slag partially with fine aggregate and bagasse ash partially with cement. The mix proportions were prepared with varying percentage of bagasse ash including one control mix of steel slag. Bagasse ash in concrete was replaced with 0, to 20% with an interval of 5% …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 1, 2017 · pp. 1–10 Read article
-
Water Modelling of Gating System
Abstract: Water modelling of a gating system in a foundry can be used to improve the quality of the castings produced to thrive in the global competitive environment, minimize the cycle time, reduce the cost, as well as meet its delivery times. So, from a customer and an economic point of view foundries cannot afford production of series of trial castings with routine changes in the gating system and choose the …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 2, 2020 · pp. 1–3 Read article
-
Experimental Investigation of Effect of Temperature and Molarity on Compressive Strength of Geopolymer Concrete
Abstract: Geopolymer concrete is a relatively new development in the field of concrete, in which regular Portlandcement is completely replaced with pozzolanic material such as fly ash, which is then activated by astrongly alkaline solution to function as a binder in the mix. As a result, we must manufactureenvironmentally friendly concrete to address issues such as global warming and CO2 emissions intothe atmosphere generated by standard Portland cement production. An experimental …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 3, 2021 · pp. 34–39 Read article
-
Noise Sources, Exposure, health effects and Control in Iron & Steel Foundry
Abstract: Foundries are one of the oldest industries and the most basic of all metallurgical processes, with two main procedures performed in a foundry: molding and metal casting. Workers are exposed to a wide range of hazardous compounds in the workplace due to the variety of materials and procedures performed in this industry, which can lead to chronic exposure to hazardous substances (physical and chemical). Noise is a major physical hazard …
Published in Journal of Industrial Safety Engineering · Vol. 8, Issue 2, 2021 · pp. 20–28 Read article
-
A Brief Description of Vibration and Noise Control in Vehicles
Abstract: In the following paper, the advanced and present state of the art technologies in vehicle’s noise and vibrations control are described. Designers and manufacturers have to dedicate the majority of their skills in ensuring that a vehicle is stable in terms of generated noise and vibration furthermore vehicle manufacturer always pay attention to the global competition of their product, stick to government regulations and rider comfort while casting or designing …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 3, 2016 · pp. 1–11 Read article
-
Identification of Die Erosion or Pit Marks & Development of Preventive Maintenance Procedure for Die Keeping
Abstract: The objective of this project is to provide a technical solution needed to minimize the uncertainty and defects, such as Die Erosion or Pit Marks on dies used for casting & to give preventive maintenance procedure for Die Keeping at Sigma Electric Mfg. Corp. Ltd., Chakan, Pune. The aim is to achieve the zero defect production & good rate of production by eliminating the defects such as Die Erosion or …
Published in Journal of Microcontroller Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 8–12 Read article
-
EFFECT OF Scandium and Zirconium ADDITIONS ON HARDNESS AND CORROSION RESISTANCE OF AA5083 Alloy
Abstract: This study investigates the hardness and corrosion resistance of modified AA5083. Stir casting with cold rolled condition was applied to prepare the four compositions, namely AA5083 alloy, modified AA5083 alloy with 0.2wt.%Sc-0.1wt.%Zr, modified AA5083 alloy with 0.4wt.%Sc-0.1wt.%Zr alloy, and modified AA5083 alloy with 0.6wt.%Sc-0.1wt.%Zr alloy. Alloying with Sc-Zr has a strong influence on the hardness of AA5083 alloy and corrosion resistance.
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 1, 2019 · pp. 1–8 Read article
-
Study on GP Zones Formation in the Sc Inoculated Ternary Al-Zn-Mg Alloys
Abstract: Mostly, ternary Al-Zn-Mg (7075) alloys are used in automotive and aerospace engineering due to readily age-hardening response and high specific strength-to-density ratio. Scandium (Sc) has great inoculation effect in Al-Zn-Mg alloys. The cast Al-Zn-Mg alloys system undergoes a complex transition sequence in order to gain maximum strength. This sequence consists of solutionizing then immediate quenching in water (T4), natural ageing and artificial ageing (T6); usually, in several temperature steps to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 2, 2016 · pp. 53–69 Read article
-
Wear Behavior of Al-Alloy (Al-5 Mg) in-situ Reinforced TiB2 Particulate
Abstract: A research has been carried out for replacing Al monolithic alloys by aluminium (Al) based metal matrix composites (MMCs) in many engineering applications where high wear resistance and stiffness are required. In this paper, the investigated dry sliding wear behavior of TiB2 particulate reinforced composite of Al-Alloy (Al-5 Mg) is discussed. The in-situ Al-Alloy (Al-5 Mg) 10wt% TiB2 composite material were prepared by molten flux reaction synthesis using electric melting …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 32–37 Read article
-
Studies on Erosion Wear Behavior of Aluminum-3 Magnesium-10 Silicon Carbide Composite
Abstract: Aluminum-based metal matrix composites (MMCs) offer potential for advanced structural applications when high specific strength and modulus as well as good elevated temperature resistance along with light weight are important. In the present work, aluminum alloy-silicon carbide composite (Al-3Mg-10SiC) is developed using the stir-casting technique and is subjected to study the wear behavior. Solid particle erosion on Al-3Mg-10SiC was conducted. Implementation of design of experiments (through Taguchi and statistical techniques) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 39–50 Read article
-
Effects of Composition on Structure & Mechanical Property of TiAl Based Intermetallic Compounds
Abstract: The effects of Al content and ternary additions such as Mo, V and Si in as cast g based alloys made by plasma arc melting on solidification structures and mechanical properties were studied. The Columnar g /a2 lamellar structures in Al-lean alloys due to primary a solidification had higher room temperature fracture strength and strain than g phase structures through the reaction of L + a = g in Al-rich …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 3, 2021 · pp. 1–10 Read article
-
Characteristics of PWC-11 in Atomic Reactors
Abstract: AbstractCarbon (0.1%) addition to basic Nb – 1 Zr alloy has introduced carbide precipitation to enhance desirable properties. Precipitation hardened PWC – 11 compared to solid solution hardened Nb – 1 Zr alloys show no appreciable changes by low cycle fatigue behavior, even failure modes are also similar i.e. intergranular cracking. Selections of suitable alloys are considered for resistance to high temperature in extraterrestrial environments and resistant to radioactive neutron …
Published in Journal of Nuclear Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 37–46 Read article
-
Mass Production Tools and Process Readiness for Uniform Parts—Injection Molding Application
Abstract: A mass production always aims to produce uniform performing products. Production tools such as pressing dies, casting dies and injection moulds, play a significant role by producing uniform parts for achieving final products. Tool complexity increases when multiple cavities are present. These tools pass through several stages of quality maturation, before starting production, where the tool capability for part uniformity can be assessed, corrected and aligned to mass production variables. …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 30–40 Read article