Search
300 articles for “powder”
-
Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite for Cylinder Liner
Abstract: Cylinder liner is used in engine block to give a wear protective surface for piston and piston rings. Friction accounts for a loss of over 30% of the total vehicle power. Over half of that power loss can be attributed to the frictional loss between piston rings and cylinder bores. The best approach for improving power train efficiency is to reduce friction loss and the way for reducing the rolling …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 1, 2017 · pp. 17–29 Read article
-
Effect of Carbon ,Chromium, Vanadium, Molybdenum, Manganese and Nickel on hardness and wear Resistance of Fe-Cr-C Hardfacing Alloys.
Abstract: The effects of combination of carbon (C), chromium (Cr), vanadium (V), molybdenum (Mo), manganese (Mn) and nickel (Ni) in Fe-Cr-C hardfacing alloy has been investigated on microstructure and microhardness with submerged arc welding (SAW) process. The Optical Microscope (OM) and Vicker micro-hardness tester were used. Powder form of ferro-chrome (Fe-Cr), ferro-vanadium (Fe-V), ferro-molybdenum (Fe-Mo), carbon (C), nickel (Ni) and ferro-manganese (Fe-Mn) were used as alloying elements to form coating layer …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 20–28 Read article
-
Optical Properties of Barium Borate (BaB2O4)Compound for Current Optoelectronic Applications
Abstract: In this work,Barium borate was prepared by sol-gel synthesisdepending on different molar (0.1, 0.2, 0.3 0.4 and 0.5) molar. Barium borate is an inorganic compound, and it was useda borate of barium with a chemical formula BaB2O4 or Ba(BO2)2 It is available as hydrate or dehydrated form, as white powder or colorless crystals. The optical characteristics of the prepared samples have been investigated by UV/Vis spectrophotometer in the wavelength range …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 1, 2020 · pp. 49–58 Read article
-
Implications of WC–cobalt Composed Forms Matrix
Abstract: This article summarizes some forms of tungsten carbide in metals under composition. Accumulated ceramic and metal powders produce cement carbide (CC). Systems in these categories are used to manufacture resistive equipment. Cementation method of tungsten carbide is a metallic manner. CC mine drills are applied for any corrosion resistant purposes. Common matrix metals are Co, Ni, Cu, Al, etc. The performance fault from heat-treated assisted oxidation was assessed by the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 26–31 Read article
-
Additive Manufacturing of rocket propulsion system
Abstract: In recent years plenty of research is going on to produce effective manufacturing techniques which can produce complex unique designs with reduced cost and lead time for aerospace applications. In this aspect, Additive manufacturing is getting a wide range of popularity in the aerospace manufacturing domain due to its vast applications and advantages. In terms of geometric flexibility and processing time, additive manufacturing outperforms conventionalmanufacturing processes. Additive manufacturing has found …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 2, 2022 · pp. 1–9 Read article
-
Halloysite nanotubes – A novel reinforcing material for future applications
Abstract: The distinctive nano materials such as nano powder, nano fluids, nano tubes, nano rods, nano particles, nano fibres and so forth are used in the field of nanotechnology. These nano materials are toxic in nature so not viewed as safe for people and for nature too. Halloysite nano tubes (HNT) are eco-friendly, naturally occurring cheaply available kaolinite group mineral. HNT incorporated materials have good in strength, thermal resistance and freely …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 34–40 Read article
-
Test Investigation on Mechanical Properties of Palmyra Bract Fiber Composite
Abstract: AbstractBiological concerns have brought about replenished enthusiasm for regular materials regarding their mechanical applications and principal examination. Recyclability and ecological security are getting to be progressively vital to the presentation of characteristic materials and items. Petroleum based items, for example, gums in thermo set plastics are poisonous and non- biodegradable. The saps and filaments utilized as a part of green composites are biodegradable when they are dumped, disintegrated by the …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 33–36 Read article
-
Engineering Properties of Alkali Activated Materials Produced from Thu Duc Water Plant Waste Sludge, Fly Ash, and Alkaline Activator by Semi-dry Pressing Method
Abstract: Alkali activated material is a product manufactured to serve the needs of construction. Theproduction of alkali activated material has many advantages compared to other traditional bakedmaterials. The product is not heated at high temperature, so it saves energy and reduces the amountof waste impacting negatively to ecology system and human life. The raw materials for production ofalkali activated materials are re-used from other industrial solid wastes such as fly ash, …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 39–48 Read article
-
Application of Polypyrrole/Lead Sulphide Nanocomposite in UV Light Assisted Photocatalysis and Gas Sensing
Abstract: The synthesis of ppy/lead sulphide nanocomposite was done using the co-precipitation method. The synthesized ppy/leadsulphide nanocomposite was characterized using Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), X-Ray Powder Defraction (XRD), Fourier Transformation Infra-Red Spectroscopy (FTIR), UV-Vis Spectroscopy techniques. The optical bandgap of the synthesized ppy/lead sulphide nanocomposite was observed to be 3.48 eV. The synthesized material is crystalline, with an average crystallite size of 2.51 nm. The photocatalytic …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 13–27 Read article
-
Exploring the Dual Functionality of Polypyrrole/Cobalt Sulphide Nanocomposite in Photocatalysis and Gas Sensing
Abstract: Cobalt sulphide nanomaterial was synthesized using the co-precipitation method, and chemical polymerization of polypyrrole (ppy) was performed in the presence of the synthesized cobalt sulphide nanomaterial for the preparation of nanocomposite. The synthesized ppy/cobalt sulphide nanocomposite was characterized by transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray powder diffraction (XRD), Fourier transformation infrared spectroscopy, and UV-visible spectroscopy. The TEM micrograph revealed that the generated cobalt sulphide nanoparticles were …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 72–85 Read article
-
Experience from Polymer-EOR on Offshore Heavy Oil Field in Bohai Bay, China
Abstract: In this paper, a review work based on the polymer flood for offshore heavy oil reservoir is presented. In recent years, the CNOOC has launched quite a few chemical EOR projects at offshore oilfields in the Bohai Bay, China. With the useful life of platform and the present production state, polymer flooding is considered and already proved as an important technology for the strategic development of offshore heavy oil fields …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 1, 2013 · pp. 14–19 Read article
-
Identification of Elements Exist in Area Around Khartoum Petroleum Refinery Using Spectroscopic Method
Abstract: Laser-induced breakdown spectroscopy (LIBS) is a method of atomic emission spectroscopy (AES) that uses a laser-generated plasma as the hot vaporization, atomization, and excitation source. Plasma is often called the fourth state of matter. The various states of matter occur as a substance is heated to temperatures corresponding to thermal energies above the binding energies for particular state of matter. Structured systems placed in a sufficiently hot environment. LIBS technique …
Published in Journal of Petroleum Engineering & Technology · Vol. 12, Issue 1, 2022 · pp. 1–14 Read article
-
Comparison of Physicochemical Concentration on Temperature Effect of Crude Oil Contaminated Water Environment
Abstract: The bio-adsorbents used are plantain stem fiber, banana stem fiber and palm fruit fiber and the investigation was aimed to examiner the effect of temperature on the performance of the bio-adsorbents in a packed bed unit for the mitigation (reduction or removal) of total petroleum hydrocarbon (TPH) from the fresh water medium using agro based fibre, which was prepared by subjecting the agro materials into sun and room dried before …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 1–17 Read article
-
To Study Effects on the Strength of Concrete after Partially Replacing Fine Aggregates by Waste Glass Bottle in M35 Concrete Mix
Abstract: AbstractConcrete is used as the major material in construction industries. As the population of world increase rapidly, worlds faces the problem for habitation and waste by-products. As the waste is proportional to the population and there are restrictions of natural resources used in concrete, this construction industry needs some attention to use some other materials so that they can be mixed in concrete to get the new product,the physical properties …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 1, 2018 · pp. 22–31 Read article
-
To Study Effects on the Strength of Concrete after Partially Replacing Fine Aggregates by Waste Glass Bottle in M40 Concrete Mix
Abstract: AbstractConcrete is used as the dominant material in construction industries. As the population of globe increase rapidly, worlds faces the problem for habitation and waste by-product. As the waste is proportional to the population and there are restrictions of natural resources used in concrete, this construction industry needs some heed to use some other material so that they can be mixed in concrete to get the new product, the physical …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 1, 2018 · pp. 39–48 Read article
-
Comparison of NVC to Different MixedDesign Method of Self-Compacting Concrete
Abstract: In comparison to normally solid vibrated (NVC), Self-compacting concrete (SCC) Elimination of extended properties and compaction due to improving productivity and working conditions. SCC usually NVC is more than powder material and thus to achieve an affordable and durable solid additions to change some of the cement by. As the flow of such recession-self acceptance of compressed concrete characteristics test results; J-ring, funnel and L box are presented. In addition, …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 37–45 Read article
-
Mechanical Properties of Acrylonitrile-Butadiene Rubber Reinforced by Cement Waste
Abstract: The basic idea of this paper is to prepare and study the composite rubber material for the manufacturing of an important part in the grain transportation systems in silos of general company for grain trade namely rablat, where it was the experience of this rablat manufactured in the new silo of Hilla/Babylon province for a period of eight months in winches and vector chain where fully proven. In this paper, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 2, 2015 · pp. 13–16 Read article
-
Thin Film Gum Arabic Doping byPotassium BromideSolar Cells
Abstract: Three solar cell were made using Gum Arabic treated with potassium bromide with three types of dyes (Saffron dye, Henna dye and Blue 8GX dye) by using Spin Coating. Powder of gum Arabic and amount of potassium bromide was made by heated in temperature 100OC firstly, and using USB 2000 spectrometer device to calculated optical energy band gap of Gum Arabic before and after doping It was found to be …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 2, 2020 · pp. 23–29 Read article
-
Atomizers in spray dryers: a review
Abstract: Atomization is the most important step in spray drying that defines the properties of liquid droplets after spraying, resulting in various forms of the dry product - from fine powders to granules. It basically refers to the disintegration of the liquid into droplets in the presence of a drying gas circulating in the medium, increasing its surface area until the droplet becomes unstable and disintegrates. The choice of the atomizer's …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 1–15 Read article
-
Feasibility Studies on Cement Mortar Replaced with Ceramic Tile Waste as Secondary Binder
Abstract: This paper presents the results of experimental works focused on replacement of ceramic waste materials with cement in the production of cement mortar. The aim of this research work is to find the optimum percentage replacement of cement by ceramic tile waste in percentage replacement (5 to 25, 50 and 100%) mortar mixes. The ceramic waste tiles are mechanically crushed down ultrafine ceramic waste (UCW) powder passing 600 μ and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 68–75 Read article