Search
325 articles for “polymer reinforcement”
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Performance Evaluation of PET Strip Fiber Reinforced Concrete
Abstract: Polyethylene Terephthalate, commonly known as PET, is a petroleum-based plastic polymer that is widely used in the packaging of various commodities due to its durability, and poses a major threat to the environment. To tackle this scenario, the construction industry is researching all possibilities to incorporate this waste into concrete and enhance the properties of concrete. The present study evaluates the performance characteristics of M 30 grade concrete when reinforced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1076–1088 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Fabrication and Testing of Advanced Concrete Made with Carbonized Bio Waste Available Locally: Special Consideration of Waste from Rajasthan
Abstract: In today's world, the construction sector must contend with a number of challenges on account of factors such as increasing urbanization and diminishing natural resources. More ecologically friendly building materials are being produced by industry as a result of increased awareness of the effects of climate change. Among other possible substitutes, rice husk ash (RHA), sugarcane bagasse ash (SCBA), and bamboo leaf ash (BLA) are already being used in the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 571–581 Read article
-
Biopolymer–Cement Hybrid Panels from Recycled Paper Mill Reject: Experimental Characterisation and Machine Learning Optimization
Abstract: The increased rate of the accumulation of industrial residues in the developing countries is a major cause of concern for the environment. The current study brings forth the use of industrial residues in the form of the production of eco-friendly building materials as a sustainable approach to their valorization. The valorization of recycled paper mill reject, a cellulose-based biopolymeric industrial residue, is being addressed in this study as a reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 67–90 Read article
-
Enhancing Mechanical Properties of Fiber-Reinforced Composites Through Sorghum Husk and Unsaturated Polyester Resin.
Abstract: Plastic, a versatile synthetic polymer, holds considerable significance and utility in human society due to its manifold applications. However, its deleterious ecological ramifications have spurred growing apprehensions. This has galvanized the pursuit of ecologically amicable substitutes, propelling interest in the domain of composite materials. Composites are formulated by amalgamating diverse substances, and in this context, Styrene Diluted Unsaturated Polyester Resin (SDUPR) is melded with natural constituents. Among these organic constituents, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 59–65 Read article
-
Effect of Functionalization on glass transition temperature of Carbon Fiber reinforced Epoxy Nanocomposites using MD Simulation
Abstract: As we all know that the mechanical characterization of any material plays a vital role in performance of the material throughout its life cycle. One of the major parameters in calculating the mechanical properties of carbon fiber reinforced nanocomposite is glass temperature. Understanding glass transition behaviour of polymer nanocomposites are crucial for optimizing their mechanical properties and performance. We used “Molecular dynamics simulations” to calculate sequel functionalization effect on glass …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 1–8 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Examination of AI Based Virtual Doctor Robot Fabricated Using Composite Material
Abstract: The accessibility and affordability of healthcare have become significant concerns for a substantial portion of the population in the modern era. In the past two decades, there has been a growing emphasis among researchers on the utilization of natural fibers as reinforcements for structural materials that are based on polymers or cementitious materials. The current investigation offers a The Virtual Doctor Robot is a cutting-edge healthcare solution that leverages the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–76 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
Reviewing the Effect of Waste PET Strips as Fiber Reinforcement in Concrete
Abstract: Polyethylene Terephthalate also known as PET is the most commonly and widely used petroleum polymer plastic in the packaging industry. It is a well-established fact that the non-biodegradability of all plastics is a hazard to the environment. Thus, effective management of this waste is necessary. Numerous researchers have carried out studies and attempts to incorporate this plastic waste into concrete for performance enhancement. Considering the possible utilization of this waste …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 166–177 Read article
-
Self-Powered Piezoelectric Nano-Polymer Networks with Embedded Wireless Nodes for Distributed IoT Sensor Platforms
Abstract: Self-powered sensing systems are emerging as a promising solution for next-generation distributed Internet of Things (IoT) platforms, where lightweight, flexible, and low-maintenance devices are required for continuous monitoring. In this work, a self-powered piezoelectric nano-polymer network based on poly-vinylidene fluoride (PVDF) reinforced with BaTiO₃ nanoparticles and multiwalled carbon nanotubes (MWCNTs) was developed for flexible wireless sensing applications. The composite was designed to combine mechanical flexibility, enhanced piezoelectric response, and real-time …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Advances in Nanocellulose-Enhanced Polymers and Composites: Structure, Performance, and Applications
Abstract: The most common biopolymer is cellulose, which can be converted into nanocellulose (NC) the sustainable nanomaterial possessing the outstanding characteristic of biodegradability, renewability, low density, high aspect ratio, and excellent mechanical performance. Such distinctive features make NC a promising filler in polymer and composite systems. Recent developments in the preparation of nanocellulose using various natural and artificial sources have facilitated scalable production processes that have less energy requirements and are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1610–1623 Read article
-
Fabrication and Characterization of Almond Skin Powder Reinforced PLA Based Composite Filaments for Fused Filament Fabrication
Abstract: Researchers around the globe are increasingly utilizing recycling methods to address waste generated from polymers, spurred by the dire need to deal with environmental challenges promoting sustainable practices. Polymers are having highly-stable long-chain polymer structure which makes it difficult to degrade easily posing many environmental and health challenges, hence, recycling of the polymers is the sole method to mitigate harmful effects. However, there has been relatively little focus on producing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 530–539 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Prediction of Mechanical Properties for Advanced Engineering Applications utilizing Polymer Composite Materials by Machine Learning
Abstract: Polymer composites show great promise as engineering materials because of their mechanical performance, resistance to corrosion, lightweight nature, and adaptability in design. Aerospace, automotive, biomedical, maritime, and civil engineers all rely on mechanical property prediction to cut down on trial expenses, expedite product development, and optimize material selection. Speedy design optimization is not possible using traditional numerical and experimental methods due to the high costs associated with material characterisation, computational …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article