Search
302 articles for “distributed simulation”
-
CONSTRUCTION SEQUENCE ANALYSIS OF HIGH-RISE STRUCTURE WITH CREEP AND SHRINKAGE EFFECT
Abstract: This study deals with a time-dependent analysis of reinforced concrete G+40 RC frame structures considering the construction sequence with the effect of creep and shrinkage analysis. Because of the non-mechanical deformations induced by the time-dependent deformations of concrete, concrete structures usually present different behaviors when the construction sequences are changed, despite having the same structural configurations. Therefore, the time-dependent effects of concrete such as creep and shrinkage must be taken …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 10–25 Read article
-
Structural Analysis of a Household Refrigerator by Autodesk Fusion 360
Abstract: The main objective of this paper is to analyse and discuss the stress distribution of a household refrigerator under a given load and decide whether the material of the model is suitable and feasible for household conditions or not. In this paper, static stress analysis is done on the tray of the household refrigerator. The geometric model used for analysis is created using Autodesk Fusion 360 and the analysis is …
Published in Trends in Machine design · Vol. 8, Issue 3, 2021 · pp. 32–36 Read article
-
Efficient Partial Update Algorithm over Wireless Networks
Abstract: Adaptive partial update algorithm is developed based on incremental method. The proposed algorithm applies in real time changing environment. The proposed algorithm responds to linear estimation with nodes in cooperative manner and less number of computations. The algorithm has powerful advantage is that it requires less number of coefficient and reduced computational and communication complexity in wireless sensor network. It is efficient because it has power of solving distributed estimation …
Published in Current Trends in Signal Processing · Vol. 6, Issue 3, 2016 · pp. 1–8 Read article
-
Transient Analysis of Non-Uniform Windings or Lines with Non-Linear Termination
Abstract: The paper deals with the transient analysis of non-uniform transmission lines and machine windings with non-linear terminations. The proposed time-domain technique is characterized by a relatively small computational burden. The analytical solution of the derived system of simultaneous differential and algebraic equations is done in Mathematica. The procedure is applied to several representative case studies involving line and winding non-uniformity and/or the non-linearity of the load termination, such as diodes …
Published in Journal of VLSI Design Tools and Technology · Vol. 11, Issue 2, 2021 · pp. 42–50 Read article
-
Sliding Mode Controller-based Load Frequency Regulation for a Two-area Interrelated Power System
Abstract: This study presents the use of the sliding mode control approach for power systems load frequency regulation. A sliding mode load frequency controller is part of a two-area power system. Both reheat and non-reheat. These two regions each have a distribution of thermal turbines. Nonlinearities such as governor dead region and production rate limitations are included in the block diagram of a power plant model. Our control objective is to …
Published in International Journal of Advanced Control and System Engineering · Vol. 1, Issue 2, 2023 · pp. 8–13 Read article
-
Power Quality Improvement in Grid-Connected PV Systems using TCSC
Abstract: Power quality issues such as voltage sags, swells, and harmonic distortions pose significant challenges to the stability and efficiency of grid-connected systems. This study presents a simulation and analysis of a Thyristor-Controlled Series Capacitor (TCSC) for mitigating voltage sags and swells, thereby enhancing overall power quality. A grid-connected photovoltaic (PV) system integrated with a TCSC is modelled and simulated using MATLAB/Simulink to evaluate its performance under diverse operating conditions. The …
Published in Trends in Electrical Engineering · Vol. 14, Issue 3, 2024 Read article
-
Polymer Composite-Integrated Food Waste Management Across the Supply Chain: Quantification, Process Modelling, and Techno-Economic Valorization
Abstract: Food waste produced throughout the global food supply chain constitutes one of the most impactful forms of inefficiency within the current food production system, producing roughly 931 million tons per year and resulting in economic losses above $1 trillion worldwide each year. One aspect that has not been sufficiently studied systematically is how polymer composite materials, such as membrane separation systems, polymer-coated extraction equipment, fiber-reinforced polymer (FRP) biorefinery infrastructure, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 819–836 Read article
-
Real Time FPGA-based Embedded Architecture of Audio Compression and Decompression Core for Multimedia System
Abstract: A multimedia system links images and audio to distribute and transmit information to users. These images and audio data have to be compressed for raising capacity of storing and processing tasks in real time without losing the required information. This paper introduces an audio processing unit by using the FPGA hardware board. This is a complete Embedded system where the audio compression and decompression core is firstly described as a …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 1, 2015 · pp. 34–44 Read article
-
A New Description of Multi-phase Flow Behavior at Boundary Layers of Low-permeability Porous Media
Abstract: At present, the recovery factor of low permeability oilfield in China is only about 20%, which is enormously lower than the recovery factor index of 60% by using water-chemical flooding in medium and high permeability layer. There are a lot of causes that resulted in low recovery factor, among them that the complex pore structure, tiny throat, large pore throat ratio and non-Darcy flow in low-permeability oil layer are the …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 1, 2013 · pp. 1–7 Read article
-
Theoretical modelling of heat transfer in non-homogeneous porous media
Abstract: The paper is focused on the study and analysis of heat transfer in geothermal substrates made up of non-homogeneous porous media. The paper analyses the influence of porosity on the heat transfer as a result of the combination of conduction and convection mechanisms that take place in non-homogeneous porous materials. As a result of the combined effect heat transfer is not homogeneously distributed throughout the cross section of the geothermal …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 2, 2022 · pp. 44–51 Read article
-
Time and Frequency Response of Non-uniform Overhead Lines Under Corona
Abstract: This study presents an efficient and direct technique for determining both the time and frequency responses of non-uniform overhead power transmission lines operating under corona conditions. The assumed-line's non-uniformity is due to the conductors’ sag. Expressions will be presented for the location-dependent line surge impedance and the unevenly distributed lines’ electrical parameters. The analysis starts with solving the relevant system of differential and algebraic equations, subject to the boundary conditions. …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 2, Issue 2, 2024 · pp. 25–33 Read article
-
Analysis of Hydrodynamic Characteristics of a Squeeze Film in O-Ring Assembly Under the Oscillating Motion
Abstract: In the most of the non-contacting face seals, squeezing occurs in the fluid film between the O-ring surface and the mating surfaces in the gland assembly. Therefore, hydrodynamic characteristics are easily simulated by considering a fluid film between a rubber surface (O-ring surface) and a rigid surface (machined surface). In this paper, effects of surface roughness of rubber block on leakage flow rate and hydrodynamic force developed in fluid film …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 2, 2015 · pp. 1–12 Read article
-
Multiphysics Optimization of Polymer–Metal Hybrid Electrode Geometry in Electrostatic Precipitators for Enhanced Particle Collection Efficiency
Abstract: Electrostatic precipitators (ESPs) remain one of the most effective technologies for controlling fine particulate emissions in industrial exhaust systems. However, their performance is strongly influenced by electrode geometry and material characteristics, which govern electric field distribution, corona stability, and particle migration behaviour. In this study, a comprehensive numerical investigation is carried out to optimize electrode geometry using a multiphysics modelling framework, while introducing a novel polymer–metal hybrid design to enhance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 701–716 Read article
-
Thermal-hydraulic Behaviour of Corrugated Pipe Configurations
Abstract: Heat exchangers have a wide range of applications and can be found in a variety of different industries, including chemical reactors, nuclear power plants, and solar energy generation. It is required to do thermal optimization on heat exchangers in order to decrease the size, cost, and energy requirements of the heat exchangers while simultaneously improving their capacity to transmit heat. In these types of businesses, heat exchangers frequently make use …
Published in Journal of Polymer & Composites · Vol. 11, Issue 14, 2023 Read article
-
Time Multiplexed Binary Offset Carrier (TMBOC) Transmitter with Polarimetric Interferometric Synthetic Aperture Radar (Pol-InSAR)
Abstract: This paper provides insights into Time Multiplexed Binary Offset Carrier (TMBOC), a modulation technique employed in satellite navigation systems, specifically designed for GPS L1C. TMBOC improves signal correlation properties by time-multiplexing Binary Offset Carrier (BOC) (1, 1) and (6, 1). The text discusses various TMBOC models, including spectral representations and power distributions. Performance analysis reveals the potential of TMBOC signals in achieving superior tracking accuracy and interference resistance compared to …
Published in International Journal of Satellite Remote Sensing · Vol. 4, Issue 1, 2026 · pp. 34–49 Read article
-
Numerical Simulation of Flow Field, Fountain Flow and Associated Noise in Supersonic Impinging Twin Jet using Large Eddy Simulation
Abstract: A three-dimensional flow field is produced by a supersonic twin-jet impingement. It is studied using the turbulence model Large Eddy Simulation (LES). The numerical model consists of two parallel jets of diameter 3D apart, which are issued from a plane which is at a distance H = 2D, 3D, 4D above the ground. The Nozzle Pressure Ratio (NPR) is kept at 3.7 for all the flow conditions. The study is …
Published in Journal of Aerospace Engineering & Technology · Vol. 4, Issue 3, 2014 · pp. 1–8 Read article
-
Modeling Galaxy Formation in a Hierarchical Universe: A Fiducial Approach and Comparison with Observational Data
Abstract: We have developed a detailed model to understand how galaxies form in the framework of hierarchical theories of structure formation. Our model accounts for key processes like the formation and merging of dark matter halos, the heating and cooling of gas inside these halos, the regulation of star formation driven by energy from evolving stars and supernovae, galaxy mergers, and the changes in star populations over time. This approach is …
Published in International Journal of Universe · Vol. 1, Issue 1, 2025 · pp. 30–36 Read article
-
CFD Approach for Analyzing the Variation of Flow Parameters and Losses in a Mixed Flow Francis Turbine
Abstract: Francis turbine can be used for a wide range of head and discharge, thus it is the most versatile water turbine in use [1]. As load varies from full load; the regime of operation changes for meeting the required power demand on electric system [2]. Efficiency of Francis turbine drops significantly at part load and overloading operations due to increased shock losses at the entry to runner, eddy formation and …
Published in Journal of Experimental & Applied Mechanics · Vol. 7, Issue 2, 2016 · pp. 54–65 Read article
-
Mathematical Modelling of Semiconductor Device Physics: An Analytical Approach
Abstract: Semiconductor device physics forms the foundation of modern electronic and optoelectronic technologies. Mathematical modelling provides a rigorous framework for understanding, predicting, and optimizing the behavior of semiconductor devices by linking physical principles with device-level performance. This work presents an analytical approach to the mathematical modelling of semiconductor devices, emphasizing the derivation and interpretation of governing equations that describe charge transport and electrostatic behavior. The model is based on fundamental physical …
Published in Research & Reviews: Discrete Mathematical Structures · Vol. 13, Issue 1, 2026 · pp. 36–42 Read article
-
Integrated Production Modeling an Asset for Designing a Development Program of a Field: A Case Study
Abstract: Current challenging scenario of environment and technologies causing Oil/Gas industry to focus on designing the development program of a field that is only possible with the help of Integrated Production modeling accurately. Managing the reservoirs through correct modeling can lead to best destinations. IPM provides key understanding of field from reservoir to separator conditions. It can provide best communication between wellbore and surface facilities Hence it can provide best economical …
Published in Journal of Offshore Structure and Technology · Vol. 1, Issue 1, 2014 · pp. 12–24 Read article