Search
298 articles for “Flexural mechanism”
-
Synergistic Effect of Green Nanofillers on Basalt–Kenaf Reinforced Sustainable Polymer Composites
Abstract: This study examines the synergistic impact of green nanofillers on the mechanical and structural properties of basalt–kenaf fiber reinforced polyester composites, with the objective of developing sustainable, high-performance polymer materials. The composites were produced with different fiber ratios: B1 (70% basalt, 30% kenaf), B2 (60% basalt, 40% kenaf), and B3 (50% basalt, 50% kenaf), and were reinforced with 1 wt.% green-synthesized nano-TiO2, obtained using an eco-friendly sol–gel technique with plant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1248–1262 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Experimental Investigation of Mechanical Properties of the Composite Materials Reinforced by Agro-based Waste Materials
Abstract: In this work, experiments were carried out to develop the glass fiber reinforced composites using the hand layup method and analyze the mechanical properties of the GFRP hybrid composites. The ultimate Tensile strength (UTS) using rice as a filler (GFRPC/R) was 3.04% and 12.89% higher than coir and wheat as filler, respectively. The hybrid composite using coir as a filler (GFRPC/C) revealed 12.54% greater flexural strength, and the hybrid composite …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 186–196 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Innovative Applications of Aerated Concrete– A Review
Abstract: This paper deals with the review of literature regarding the Aerated Concrete. The main aim of the research was to study the application and properties used for paving structure, retaining structures, as a mortar, etc. The papers studied for the project mainly consist of the use of air entraining agent with different materials. For finding the mechanical properties, moisture content, freezing thawing effects, corrosion, etc., different experimental procedures, methods, materials …
Published in Journal of Construction Engineering, Technology & Management · Vol. 8, Issue 3, 2018 · pp. 13–19 Read article
-
Reuse of Scrap Tyre as Partial Replacement of ¾˝ Natural Coarse Aggregate in Concrete and its Impact on Properties of Concrete
Abstract: A modern lifestyle, alongside the advancement of technology has led to an increase in the amount and type of waste being generated, leading to a waste disposal crisis. This paper tackles the problem of the waste tyre, thrown after use in vehicles. In order to dispose of or at least reduce the accumulation of rubber tyre waste, it has been suggested to reuse these waste materials to substitute a percentage …
Published in Journal of Construction Engineering, Technology & Management · Vol. 5, Issue 1, 2015 · pp. 44–48 Read article
-
Studies on Mechanical Properties of Ultra High Molecular Weight Poly Ethylene (UHMWPE)-Basalt Fiber Reinforced Hybrid Polymer Matrix Composites
Abstract: Composite materials have become a preferred material now days because of their strength and also they are light. An additional material can be produced by a combination of matrix and reinforcement. The connections also give the flexibility of the design, because many of them can be formed in complex shapes. The economic significance of composite materials is now illustrious. There is strong indication far and wide that this importance will …
Published in Journal of Polymer & Composites · Vol. 7, Issue 3, 2019 · pp. 8–19 Read article
-
Testing of Efficiency of Wind Turbine Blade NACA2415 Aerofoil Type Using Recycled Carpet Waste Polymer Composite Material
Abstract: In 2020, over 50% of residential properties in the United States were outfitted with carpet flooring, boasting an average longevity ranging from 10 to 18 years. Carpets are crafted from various fibers, including woven nylon, polyester, polypropylene, or wool fibers. Historically, nearly 6 billion pounds of discarded carpets were directed to landfill sites, perpetually undergoing decomposition processes. My current project entails the fabrication of a wind turbine blade utilizing a …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 314–324 Read article
-
Studies on Mechanical, Thermal, Physical Properties and Characterisation of PLA-EVA Blend with Microclay and Product Development
Abstract: PLA-EVA (70:30 wt. %) with microclay (1, 3, 5 wt. %) was also melt blended using Glycerol (1%) was used as compatibilizer in a twin screw compounding extruder. Then test specimens were prepared by an injection molding machine. Mechanical, thermal and physical properties were evaluated. As microclay content was increased, the tensile strength, elongation at break and tensile modulus were slightly decreased but higher than that of PLA-EVA (30 wt. …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 24–33 Read article
-
Investigation of Mechanical Properties of Hollow Bricks Incorporating Aerated Aggregates: A Polymer-Cement Composite Approach
Abstract: The rapid advancement of construction technologies has necessitated the development of lightweight, thermally efficient, and sustainable building materials. Hollow bricks, due to their inherent voids, offer substantial reductions in dead load and enhanced insulation properties. However, their mechanical performance often falls short when compared to conventional solid bricks. To address this limitation, this study explores the synergistic integration of aerated aggregates and polymer-cement composites (PCCs) in hollow brick production. Aerated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 92–105 Read article
-
Unsaturated Polyester Resin and Rice Husk Composites
Abstract: Plastic is a very useful and important part of human beings but it is quiet harmful to environment. The increasing demand for the eco-friendly material is growing interest towards the field of Composites. The Natural composites of Styrene Diluted Unsaturated Polyester resin are made. Various natural materials are used to make different composites. This study includes Rice Husk Composite of SDUPR. There are many methods to prepare composites. Methods such …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 76–84 Read article
-
An Attempt to Test Suitability of Bamboo Strips as a Structural Material
Abstract: Abstract Many researchers have tried different materials with concrete as a reinforcing material in concrete structural members. In this paper attempt have been made to test bamboo strip in its mechanical properties and find suitability to use bamboo strip as a reinforcing material in concrete structural members. After conducting test on bamboo strips in laboratory very good results obtained. Bamboo strip after getting results in lab seems to have good …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 3, 2015 · pp. 60–64 Read article
-
Development of Polymer–Micro-Aluminum Composites for Lightweight Engineering Applications
Abstract: This research focuses on the systematic development of polymer–micro aluminum composites, with polypropylene (PP) and epoxy selected as representative polymer matrices. Micro aluminum fillers in the range of 5–25 wt.% were incorporated through melt blending (PP) and casting (epoxy), and the resulting composites were evaluated in terms of mechanical performance, microstructural integrity, and crystalline characteristics. Tensile strength of the composites increased significantly, from 31 MPa in neat PP to 44 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1–12 Read article
-
Experimental Investigation on Two Lift Cement Concrete Pavement
Abstract: Rigid pavement construction is promoting now a days due to its durablilitycriteria.Cost of fresh aggregate is 30-35% more than recycled aggregate which causes increase of overall cost of pavementthustwo lift pavement has great potential as a sustainable paving solution.The main objective of this study is to use recycled aggregate in concrete pavement which reduced overall cost of the pavement.Sincenatural aggregate scarcity is increasing day by day.Generally homogenous layer of concrete …
Published in Trends in Transport Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 1–7 Read article
-
Thermally Trigged Self-Healing Smart Shape Memory Polymer Composite
Abstract: Temperature-responsive self-actuating PU/MWCNTs composites were prepared with micro-compounder through in-situ polymerization. For making of 1CNTPU composite sample 1 part per hundred multiwall Carbone nanotubes (MWCNTs) were reinforced into the neat polyurethane (PU) base matrix. Surface characterizations for pure and composite have studying by using Atomic Force Microscope (AFM), high resolutions Scanning Electron Microscopy (SEM). Properties like shape recovery, storage modulus, loss modulus, tensile stress, degree of hardness, and flexural stress …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 10–18 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Development and Multiscale Characterisation of a Sustainable Hybrid Polymer–Cementitious Composite
Abstract: The development of sustainable polymer–cementitious composites has gained increasing attention as a strategy for reducing virgin resource consumption while improving the mechanical and functional performance of cement-based materials. This study investigates a hybrid composite incorporating sugarcane bagasse ash (SCBA), distilled sewage water (DSW), styrene–butadiene rubber (SBR), and polypropylene (PP) fibres. Four mixtures, namely C0–C3, were developed by progressively increasing SCBA from 0 to 15%, DSW from 0 to 20%, SBR …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Preparation and Characterization of a Novel Lignocellulosic Fiber from Calotropis gigantea Stem Fiber for Thermoplastic Composites
Abstract: In the current article, Calotropis gigantea fiber mat (CGM)/thermoplastic polypropylene (PP) strengthened non-woven unidirectional composites were successfully manufactured by hot compression molding using the film piling method. Micromechanical and physicomechanical properties such as tensile, flexural, compressive, impact properties, thickness, swelling, and water absorption of CGM/PP composites were evaluated for the effects of CGF composition, mercerization of CGF as well as the inclusion of two types of coupling agents (vinyltriethoxysilane and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 15–33 Read article
-
Experimental analysis of wind turbine blade (HAWT) with recycled carpet waste polymer composite material
Abstract: The term "carpet" is often used interchangeably with "rug," but there is a technical distinction. Rugs are generally smaller and can be easily moved, while carpets are typically larger and cover a significant portion of the floor. Carpets are commonly used to enhance the comfort of indoor spaces, provide insulation, and contribute to the overall design and atmosphere of a room. Polymer composite materials also known as polymer matrix composites …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 259–265 Read article