Search
404 articles for “Electronic properties”
-
Advancements in Thin Film Coatings for High-Efficiency Electronics and Communication Devices
Abstract: Thin film coatings have become integral to the development of high-efficiency electronics and communication devices, offering enhanced performance, miniaturization, and multifunctionality. This review delves into recent advancements in thin film technologies, focusing on their applications in semiconductors, optoelectronics, and communication systems. We explore various deposition techniques, including atomic layer deposition (ALD), chemical vapor deposition (CVD), and solution-based methods like spin coating, highlighting their impact on device efficiency and scalability. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 19–24 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Combustion Synthesis and Comprehensive Characterization of Pure and Ni-Doped CuFe₂O₄ Nanoparticles for Functional Composite Applications
Abstract: The CuFe2-xNixO4 (x = 0, 0.1, 0.3, and 0.5) nanoparticles were synthesized using a combustion method and comprehensively characterized to understand their suitability for polymer-based composite applications. X-ray diffraction confirmed the formation of a single-phase spinel ferrite structure with crystallite sizes of 20–30 nm. Energy-dispersive X-ray spectroscopy verified the successful incorporation of Ni ions into the CuFe₂O₄ lattice, while FE-SEM analysis revealed uniformly dispersed nanoscale particles desirable for composite reinforcement. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Dissimilar Joining Of Aluminium Alloy to Copper Using Tungsten Inert Gas Welding Process
Abstract: Aluminium-copper dissimilar joints are applicable to electrical industry. 2 mm thick aluminium alloys (A1100) sheet is joined to 1 mm thick copper (Cu-DHP) sheet using tungsten inert gas welding (TIG) process. The effect of process parameters like heat input, torch orientation, arc weaving on mechanical properties of the joint are studied. In this combination the molten pool generated by melting of aluminium edge will wet the coppersurface to form a …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 2, 2018 · pp. 15–20 Read article
-
Advanced Materials in Driving Innovation and Advancement in Industry
Abstract: Advanced materials have become increasingly important in driving innovation and advancement across multiple industries. These materials offer unique properties that can improve the performance, durability, and functionality of various products, leading to new opportunities for growth and competitiveness. In this paper, we examine the role of advanced materials in different industries, including aerospace, energy, healthcare, electronics, and transportation. We explore some of the latest developments in materials science and engineering, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 1, 2023 · pp. 1–5 Read article
-
Structural, Morphological, Optical, and Electrical Properties of Sol–Gel Synthesized Bismuth Ferrite Nanoparticles for Photovoltaic Applications
Abstract: Solar cells are a promising renewable energy source, converting solar energy into electrical power. The performance and efficiency of solar cells can be enhanced by incorporating multiferroic materials, which have the potential to improve energy conversion. Bismuth ferrite (BFO) is one such material that has attracted attention for photovoltaic applications due to its bandgap energy, which ranges from 2 eV to 2.7 eV. However, its practical efficiency is currently low …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 28–41 Read article
-
An Ultraviolet-Curable Nano Cerium Oxide Coating and Its Anti Ultraviolet /Blue Light Properties
Abstract: An ultraviolet (UV)-curable nano cerium oxide (CeO2) coating with enhanced blue light and UV shielding properties, prepared using an ultrasonic blending method, is presented. This study systematically investigated the optimal synthesis conditions for nano CeO2, as well as the effects of UV intensity and CeO2 concentration on the curing kinetics and blue/UV light shielding performance of the UV-curable nanocomposite. The results indicate that the synthesized nano CeO2 exhibited improved mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 306–324 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Analysis of Ageing and Degradation Behavior of Polyamide-12 for Sustainable Additive Manufacturing
Abstract: Additive Manufacturing (AM), particularly High-Speed Sintering (HSS), has emerged as a transformative technology capable of producing complex thermoplastic parts with high efficiency and minimal material waste. The HSS process involves selective deposition of radiation-absorbing ink followed by infrared heating to consolidate polymer powders-most commonly polyamide-12 (PA12). While PA12 is widely used due to its excellent thermal stability and mechanical properties, the sustainability of HSS strongly depends on the reuse of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 136–154 Read article
-
Development and Evaluation of a Novel Polyaniline/Polyvinyl Alcohol/Silver Nanocomposite for Antibacterial Applications: Synthesis and Characterization
Abstract: A novel nanocomposite made up of polyaniline, polyvinyl alcohol, and silver (PAL/PVA/Ag) was synthesized using the reduction of chemical technique in this study. Aniline was polymerized in situ with ammonium persulfate to create polyaniline (PAL), while Ag+ ions were employed to make an nanoparticle of Ag colloidal solution. The combination of Ag nanoparticles with the PAL/PVA composite resulted in the development of a new nanocomposite. Scanning electron microscopy (SEM) and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 39–47 Read article
-
Nanotechnology and Sustainability Motion
Abstract: Nanotechnology is the focus of many scientific communities due to its multifunction. To realize such functionality, the size, dimensions, and shape dependent physio-chemical properties are first analyzed. Then, measurable nanostructures including nanomaterials, nanocomposite, and nanoparticles which impact the functional properties of materials and devises are assessed. Herein, the role of such nanostructures in enhancing the efficiency, performance, and quality of materials and technology is envisioned. As a vehicle, contributions of …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 1, 2025 · pp. 7–13 Read article
-
A Review on Metal Inert Gas Welding of Dissimilar Steels
Abstract: Joining of dissimilar metals has found its use extensively in power generation, electronic, nuclear reactors, petrochemical and chemical industries due to environmental concerns, energy saving, high performance, cost saving and so on. However efficient welding of dissimilar metals has posed a major challenge due to difference in thermal, mechanical and chemical properties of the materials to be joined under a common welding condition. This causes a steep gradient of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 1, 2020 · pp. 1–15 Read article
-
Microstructure and Mechanical Characterization of AA390 and Si3N4 Metal Matrix Composite Using Severe Plastic Deformation
Abstract: Metal matrix composites (MMCs) have significant attention in recent years due to their potential for improved mechanical properties compared to conventional monolithic materials. This study focuses on the microstructure and mechanical characterization of a MMC comprising AA390 aluminum alloy reinforced with Si3N4 particles. The severe plastic deformation (SPD) process, Equal Channel Angular Pressing (ECAP), was employed to fabricate the composite with enhanced mechanical properties. The ECAP method was chosen as …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 17–30 Read article
-
Influences of Surface Modification of Vetiver Fiber Reinforced Polypropylene Composites
Abstract: Plant-drive vetiver fiber (VF), a significant lignocellulosic fiber, can be included in polymers like polypropylene (PP) in dissimilar ways for attaining preferred features and structure. But its high levels of moisture absorption, poor wettability and inadequate adherence between the fiber and polymer matrix result in debonding with age. To develop the overhead attributes,adequate surface modifications are essential. In our current work, the VF surface was modified by mercerized treatment (MVF), …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 30–44 Read article
-
A Comprehensive Review on Piezoelectric Composites for Energy Harvesting and Sensing
Abstract: The capacity of piezoelectric composites to transform mechanical energy into electrical energy and vice versa has drawn a lot of interest recently. This property makes them very appealing for use in energy harvesting and sensing applications. These materials combine the high piezoelectric performance of ceramics with the mechanical flexibility and processability of polymers or other matrices, enabling a wide range of practical uses in flexible electronics, wearable systems, and embedded …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 19–24 Read article
-
Mechanical Property Assessment of Hybrid Composite Laminates Composed of Jute Glass Fibers in Combination with Flax, Hemp, Sisal and Kenaf Fibers Using the Hand Layup Technique
Abstract: The present work compares the properties of various hybrid composite laminates manufactured using the hand layup technique and addresses their production process, based on glass fiber as the exterior layer and natural fibers (flax, hemp, kenaf, jute, and sisal) as interior layers, in an epoxy resin. Five stacking sequences A-GJJJJG, B-GFJJFG, C-GHJJHG, D-GKJJKG, and E-GJSSJG were used to prepare the test specimens. According to ASTM guidelines, experiments were performed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 103–113 Read article
-
Eco-friendly Materials of Polymer Composites Based on Water Hyacinth Fibers/Roving
Abstract: Overgrowth of water hyacinths will cause difficulties for water traffic in the Mekong Delta and affect the growth of other aquatic species. The water hyacinth as a raw material available in nature has been applied in production of the composite materials. The water hyacinth trees were treated in NaOH solution for 2-12 hours with concentration in the range 2.5-15.0%. The morphology of the water hyacinth before and after treatment was …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 62–69 Read article
-
Microstructural Characteristics and Mechanical Properties of the Green Composites Reinforced Bamboo Optimized the Treated Parameters
Abstract: Concrete and steel are traditional building materials with high strength and stress. They are usedeffectively in civil construction, structures of bridges and others. According to the current trend, theconstruction materials have more attention for low density and high durability which produced fromnatural materials; moreover, they are able to be recycled and reused. In this study, the green compositeswere fabricated based on the highly performance epoxy combined with bamboo to get …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 28–38 Read article
-
Advancements In Hydrogenated Diamond-Like Carbon Thin Film Deposition & Surface Modification
Abstract: Materials synthesis and processing are pivotal in advancing technologies across domains such as electronics and biomedical applications. This review provides a detailed exploration of recent advancements in thin film deposition techniques, focusing on hydrogenated diamond-like carbon (HDLC) films and various surface modification methodologies. Beginning with an overview of HDLC films, the paper highlights their unique properties and wide-ranging applications, emphasizing their importance in modern materials science. Key sections of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 761–777 Read article
-
Innovative Synthesis Techniques and Comprehensive Mechanical Characterization of Biopolymer-Based Composites for Advanced Applications in Biochemistry and Materials Sciences
Abstract: Biopolymer-based composites have gotten a lot of attention lately because they could be used in biology and materials science in interesting ways. The main goal of this study is to come up with new ways to make composites and then fully characterize their material properties so that they can be used in more advanced ways. During the production step, a new method is used that combines green chemistry ideas with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 119–136 Read article