Search
1811 articles for “Carrying”
-
Comparative Study of Seismic Performance of Conventional Tube Structures and Diagrid Structure
Abstract: AbstractConstruction of tall building is rapidly increasing throughout the world. Advances in construction technology, structural systems, analysis and design software facilitated the growth of the buildings. Recently, the diagrid structural system has been widely used for tall buildings due to the structural efficiency and aesthetic potential provided by the unique geometric configuration of the system. The “diagrid” is a combination of the two words i.e. diagonal and grid which form …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 1, 2018 · pp. 32–38 Read article
-
Seismic Analysis of Ductile Detailed Reinforced Concrete Structure for SMRF with & without Shear Wall with reference to IS13920:1993(Old Code) & IS13920:2016(Revised Code).
Abstract: Abstract The occurrence of earthquake has increased recently causing severe damage to human life and property. Hence accurate seismic analysis of structure is needed to be carried out considering all the parameters of the building. There are two methods for seismic analysis one is static and the other is dynamic method i.e. Seismic Co-efficient method for static analysis and Response Spectrum method for dynamic analysis of the building. In this …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 74–80 Read article
-
INCREMENTAL DYNAMIC ANALYSIS, EIGEN VALUE ANALYSIS & RESPONSE SPECTRUM ANALYSIS OF EXISTING RC FRAMED BUILDINGS BY USING SEISMOSTRUCT SOFTWARE
Abstract: ABSTRACTCivil Engineering structures are designed to withstand environmental forces like earthquake, along with gravity loads. These forces are random and dynamic in nature. Therefore the response of the structure is also dynamic and that is what causes the unsafe and uncomfortable conditions.So, performance based analysis of the structure is required which can be achieved by Incremental Dynamic Analysis (IDA) as well as Response Spectrum analysis (RSA). But, Incremental dynamic analysis …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 25–52 Read article
-
Damage Assessment and Strengthening of Transmission Line Tower at Component Level
Abstract: The damage assessment and strengthening of transmission tower is an important factor to be considered for life enhancement. The transmission towerdeteriorate due to corrosion and ageing. In this paper, analytical and experimental investigation is carried out at component level on cantilever beam made of square hollow and angle section. The damage is inflicted by reducing the stiffness of the beam. The damage is assessed based on frequency response measurements. The …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 9–15 Read article
-
Seismic Response of Braced RC Elevated Water Tanks for Various Seismic Zones
Abstract: In this paper, a reinforced concrete elevated water tank with a capacity of 500 cubic meters and h/d ratio=0.7 is considered, the present study investigate the performance of elevated water tank using dynamic analysis, i.e., Response Spectrum method. The modeling of elevated water tank is carried out by using finite element base software STAAD.Pro. Total twelve number of model were made for empty tank, half tank and full tank condition, …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 43–64 Read article
-
Effect of Outriggers Location on Performance of RC Building Subjected to Loss of a Column
Abstract: Progressive collapse denotes a failure of substantial part of the structure, causing greater damage to the structure than the initial impact, which has been initiated by failure of a relatively small part of the structure such as failure of any vertical load carrying elements (typically columns). Failure of large part of any structure will result into substantial loss of human lives and natural resources. Therefore, it is important to prevent …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 65–72 Read article
-
Advanced Modeling and Static Analysis of Inverted Umbrella Roof Shell Using ANSYS
Abstract: In this objective paper, an inverted umbrella roof shell are designing and modeling for the static analysis in ANSYS (15) using finite element method. The finite element analysis is carried by using total deformation and normal stresses in longitudinal direction and on X and Y plane to determine, respectively. Responses of umbrella roof shell results are linear and quadratic variation of the membrane displacements in the inverted direction are investigated …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 31–35 Read article
-
Economical Design of Stiffened Plate using FEM
Abstract: This paper presents the economical design of stiffened plate subjected to transverse load. The model of stiffened plate is developed using ANSYS APDL 14.0 for the finite element analysis and design. At first, a convergence study is carried out to arrest the optimum mesh size for discretizing the plate. The maximum deflection of plate with and without stiffeners subjected to point and uniformly distributed load for both fixed and simply …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 50–57 Read article
-
Analysis of RC Frames Using Different Bracing Systems in Different Positions and Zones
Abstract: Structures are mainly built to enhance the performance of several activities like recreation, transportation, power generation, etc. They are built to sustain the loads coming on them during their service life by carrying adequate strength and also limit the deformation by possessing enough stiffness. Strength of a structure depends mainly upon the characteristics of material with which it is constructed. Stiffness is dependent upon the cross-sectional and geometrical properties of …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 1, 2016 · pp. 16–27 Read article
-
Design of Steel Plate Shear Wall with Opening for Steel Building
Abstract: Steel plate shear walls have been used more and more in the steelstructures to resist earthquake and wind forces. This system offersseveral advantages as compared to the other usual lateral load resistingsystems. Steel saving, speed of erection, reduced foundation cost, and increased usable space in buildings are some apparent advantages ofthe steel plate shear walls. Steel plate shear walls also provide majorstiffness against building drift for the hi-rise buildings.This paper …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 3, 2014 · pp. 23–30 Read article
-
Influence of Corrosion on Flexural Strength of Concrete
Abstract: The large-scale infrastructure uses reinforcement concrete. It has been believed that protection to steel reinforcement by concrete is permanent. The influence of atmospheric corrosion of steel and its performance in concrete has been subject to controversy in the construction industry. Service life of reinforced concrete structure can be significantly reduced when the corrosion of reinforcing steel is initiated; the product of corrosion expands and occupies greater volume than original volume …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 35–42 Read article
-
Study of Diagonal Ties and Metal Plate as a Confining Reinforcement for RCC Short Columns
Abstract: Column is a most important structural member in the structural system. Even after the strong column weak beam theory used in the design of the structural member it has been observed that the many times structure collapsed due to the failure of the column. There are many reasons of the column failure but out of that major reason of the failure is ineffective confinement of the column specimen and uneven …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 39–46 Read article
-
Non-Linear Dynamic Analysis of High-Rise Flat Slab Structure with Various Lateral Load Resisting System: Indian Scenario
Abstract: In this technological era, the construction of high-rise flat slab structure is increasing everywhere, due to its major advantages over a conventional beam slab structure. Due to the poor performance of high-rise flat slab structure in higher seismic zones, IS 1893 (Part 1): 2016 discourages the use of flat slab structure in higher seismic zones. The use of high-rise flat slab structure in high seismic region is a risk, because …
Published in Journal of Structural Engineering and Management · Vol. 9, Issue 2, 2022 · pp. 1–12 Read article
-
Effect of Surface Texture on Pressure Distribution in Hydrodynamic Journal Bearing
Abstract: This paper presents an analysis of the pressure distribution of hydrodynamic journal bearing for different surface texture, velocity variation and load variation. The performance of journal bearing depends on speed, load carrying capacity, viscosity of oil and temperature condition. Therefore, the effects of these parameters on the performance of journal bearing, on the pressure distribution and on the load carrying capacity have been analyzed on the basis of number of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 2, 2016 · pp. 11–18 Read article
-
Development of Primer as a Value Added Product from Waste PET
Abstract: Polyethylene terephthalate was depolymerized by two different chemical recycling techniques i.e. glycolysis and aminolysis. Glycolysis is carried out with Zinc hydroxide and with conventional catalyst i.e. Zinc acetate for the comparable yield of the monomer. Glycolysis is carried out with ethylene glycol whereas aminolysis is done with ethanolamine. Products obtained from both the techniques namely Bis(2-hydroxyethyl) terephthalate (BHET) and Bis(2-hydroxyethyl) terephthalamide (BHETA) have different chemical structure but have hydroxyl functionality …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 3, 2015 · pp. 5–16 Read article
-
Power Market Management and Grid Controls Platforms with Integrating Third Party Owned DER
Abstract: In the deregulated electricity market, many Individual Powers Produces (IPP)/Distributed Energy Resources (DER) compete to sell the power. Grid and power flow controlling is a challenging task. In deregulated scenario many market model, according to that the power-flow control has to be done looking at the Available Transfer Capacity (ATC) in the lines. FACTS controllers are well suited to control the active power by injecting/absorbing the reactive power from the …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 7, Issue 3, 2020 · pp. 24–30 Read article
-
Single Bit Low-Power High-Speed Full Adder
Abstract: This paper presents a high-speed low-power full adder cells that lead to have a reduced power-delay product (PDP). A comparison against other full-adder structure as having low PDP, in terms of speed, power consumption and area of cells is carried out. This paper contains, a hybrid 1-bit full adder design employing both complementary metal-oxide semiconductor (CMOS) and transmission gate logic styles. First implemented was the design for 1 bit then …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 3, 2017 · pp. 55–60 Read article
-
Which is the Best 10T Static CMOS Full Adder for Ultralow-Power Applications?
Abstract: This paper presents the analysis of various 10-transistor CMOS 1-bit full adder circuits in terms of their output levels and finds out the suitable adder cell at 200 mV in subthreshold region at 16-nm technology node for ultra-low power applications. This paper also provides worst case output levels (sum and carry) of all the analyzed adder cells (which are presented in the paper) for various input combinations.Keywords: CMOS, carry, 2:1 …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 1, 2015 · pp. 45–50 Read article
-
Comparative Analysis of High Speed Comparator for A to D Converters
Abstract: In this paper dynamic comparator along with the output buffer stage has been introduced. The simulation is carried out in 130 and 90 nm technologies. The supply voltage for 130 nm is 1.3 V and for 90 nm is 0.9 V. Different analyses for various characteristics of the comparator such as ICMR, delay, offset voltage and power dissipation is carried out in 130 and 90 nm CMOS technology. The comparator …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 2, 2015 · pp. 4–10 Read article
-
High-speed CMOS ADCs Design
Abstract: This paper presents the design of high-speed subranging and flash analog to digital data converters (ADC) including the design of efficient operational amplifier to meet the performance requirements of these data converters for the specifications laid down targeted to the SCL 1.2 μm CMOS Foundry. The design starts from the specification of the circuit, its theoretical analysis for the parameter estimations of the transistors as well as the circuit’s design. …
Published in Journal of VLSI Design Tools and Technology · Vol. 2, Issue 1-2-3, 2012 · pp. 59–74 Read article