Search
330 articles for “Pro-cast”
-
Method of Analysis for Chloride Distribution in Concrete from Torrent Data
Abstract: Design w/c ratio becomes less important than achieved cover performance in the case of existing structure. Therefore, inspection data of chloride profile from some real structures do not always obey the rule of Fick’s law, suggesting the influence of a new parameter. In this study, chloride ion profiles and behavior of penetrating water for normal, fly ash and slag concrete with w/c ratio as 40, 55, and 70%, respectively, cast …
Published in Journal of Construction Engineering, Technology & Management · Vol. 4, Issue 3, 2014 · pp. 10–19 Read article
-
Study on Hot Working Characteristics and Deformation Response of as Cast AZ91 Mg Alloys
Abstract: The deformation response of magnesium alloy AZ91 was investigated by means of hot compression tests. The flow curves were obtained in the temperature and strain rate range of 300–500°C and 0.001–1 s-1, respectively. The processing maps of the studied material were obtained by interpreting them on the basis of the dynamic material model. The activation energy maps were developed based on Lyapounov’s function and the safe processing zones were confirmed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 112–122 Read article
-
Iron Deficiency Anemia: From Historical Background to Management—A Review
Abstract: The word anemia comes from the ancient Greek word άναιμία, anaimia, meaning ‘lack of blood’. Simply, anemia means a decrease in the total amount of hemoglobin (Hb) or the number of red blood cells (RBCs). Anemia remains a widespread public health problem with major consequences on human health as well as social and economic development. Globally, the most significant contributor to the onset of anemia is iron deficiency (ID) so …
Published in Research and Reviews: Journal of Oncology and Hematology · Vol. 9, Issue 1, 2020 · pp. 29–40 Read article
-
Prototype of Design, Analysis and Optimization of Front Hub Upright Assembly of ATV (All-Terrain Vehicle) for Baja SAE India Competition
Abstract: When all-terrain vehicle came in dynamic condition steering and suspension geometry, it affected the vehicle stability. This stability limits the speed and comfort of the vehicle. Stability is more required in all-terrain vehicles because they have to wear more dynamic force; if vehicle will be unstable then failure will occur; it also decreases the ergonomics and comfort of the driver, so it is mandatory that vehicle should have proper geometry …
Published in Journal of Automobile Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 15–20 Read article
-
In Silico Identification of Antimalarial Drug Targets and Screening of Potential Inhibitors in Plasmodium vivax
Abstract: AbstractMalaria is an infectious disease caused by the protozoan of the genus Plasmodium. It is a major problem in third-world countries, with hundreds of millions of infections and millions of fatalities annually. Plasmodium vivax is the most frequent and widely distributed cause of recurring (Benign tertian) malaria. Due to emergence of drug-resistance, one has to explore new dimensions in order to curb the menace. We propose a two-step strategy—first step …
Published in Research and Reviews : Journal of Computational Biology · Vol. 9, Issue 1, 2020 · pp. 52–75 Read article
-
Advances in Polymer-Based Nanocomposites for Moisture-Sensitive Applications
Abstract: Polymer-based nanocomposites have emerged as promising materials in sensor technology due to their superior mechanical, electrical, and environmental stability. These advanced materials offer unique advantages, such as enhanced sensitivity, durability, and adaptability to various environmental conditions, making them highly suitable for sensor applications. One of the most significant breakthroughs in this field is the integration of semiconducting nanoparticles (NPs) within a polymer matrix, which has led to remarkable improvements in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 145–152 Read article
-
Corrosion Measurement and Hardness Test of Magnesium-Tri Calcium Phosphate Composite Fabricated by Stir Casting
Abstract: Magnesium MMC is preferred in applications requiring high-quality materials and has replaced monolithic materials. Bio-implants traditionally used are titanium, steel, and nickel-titanium alloys, however, their removal necessitates surgery, which is costly and painful. While biodegradable 3D-printed implants are effective and eliminate the need for a second surgery, they remain expensive. After several studies to solve this issue, the development of biodegradable implants is considered. Magnesium possesses good biodegradable properties. An …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 436–447 Read article
-
Structural Analysis of Heavy Vehicle Chassis Using Various Geometries and Materials
Abstract: The present research investigates the significance of the automobile chassis as a crucial section of a vehicle that provides a framework for the body and other parts to rest on. It highlights the need for the chassis to have sufficient bending stiffness for the best handling qualities, as well as enough rigidity to withstand shocks, twists, vibrations, and other loads. The draft and designing model for all the sections (I, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 9–33 Read article
-
Experimental Study on Properties of Concrete with Phoenix Fibres
Abstract: In this paper, an attempt has been made to investigate the possibility of using phoenix fibre to improve the properties of concrete. The aim of this research is to investigate the properties of concrete with phoenix fibres of various percentages. Mechanical properties such as compressive strength, split tensile strength of concrete using phoenix fibre have been investigated. M20 grade of concrete has been used for this investigation. Mechanical strength tests …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 40–45 Read article
-
Polymer Chemistry of Ion-Selective Membranes and Hydrogels for Clinical Sodium Sensing: Advances and Perspectives
Abstract: Accurate and timely monitoring of serum sodium levels is critical in diagnosing and managing hyponatremia, a common and potentially life-threatening electrolyte disorder. Recent advances in polymer chemistry have driven the development of ion-selective membranes and hydrogels tailored for clinical sodium sensing, bridging the gap between material science and biomedical diagnostics. This review critically examines the design and synthesis of polymeric materials—focusing on block copolymers, conductive polymers, and stimuli-responsive hydrogels—used to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 895–901 Read article
-
Development of sustainable GGBS and FLYASH based Geo-polymer Concrete
Abstract: Construction has been most important human activity since ancient time. Concrete is widely used and trustworthy material for construction. Some of challenges in industry are global warming and insufficiency of construction material. One of the methods for replacing concrete constituents is the use of geo-polymer which helps in using very less quantity of cement in concrete. This project represents study on the mechanical properties of geopolymer concrete with various mixes. …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 6–11 Read article
-
Behavior of Concrete Masonry Blocks with Ceramic Waste
Abstract: The blooming economic growth of India has led to development of construction sector. This has helped in increasing requirement of natural resources in construction sector and also leading to generation of large quantity of waste. Utilization of construction and demolition waste has become essential considering the problems such as disposal and health hazard of mankind. This paper mainly presents on ceramic waste which is a construction and demolition waste. Ceramic …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 35–40 Read article
-
Background Suppression for Visual Surveillance Using SOM
Abstract: AbstractBackground suppression is widely used approach for detection of moving objects in video streams which is the first relevant step of information extraction in many computer vision applications. Aside from the intrinsic usefulness of being able to segment video streams into moving and background components, detecting moving objects provides a focus of attention for recognition, classification, and activity analysis, making these later steps more efficient. An approach based on self-organization …
Published in Journal of Communication Engineering & Systems · Vol. 5, Issue 1, 2015 · pp. 15–20 Read article
-
Fabrication, Interfacial Characterization, and Superparamagnetic Properties of Fe₃O₄@γ-Fe₂O₃ Core/Shell Nanoparticle-Reinforced Chitosan Biopolymer Composites
Abstract: Magnetite/maghemite core/shell nanoparticles were prepared by alkaline co-precipitation of Fe(II) and Fe(III) precursors followed by controlled thermal oxidation at 350 °C and subsequently incorporated into chitosan at 1, 3, and 5 wt% loadings by solution casting. The resulting films were evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), high-resolution transmission electron microscopy (HR-TEM), vibrating-sample magnetometry (VSM), thermogravimetric analysis (TGA), and tensile testing. XRD showed the characteristic cubic spinel reflections …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Role of Bimetallic (Ag-Cu) Nanoparticles on the Structural Properties of PVA/PVP Blend Green Nanocomposites
Abstract: This study reports the green synthesis of polymer blend nanocomposites of Polyvinyl alcohol (PVA) and Poly vinylpyrrolidone (PVP) embedded with Silver (Ag), Copper (Cu) mono metallic and Silver-Copper (Ag-Cu) bimetallic nanoparticles (NPs), generated using plant mediated solution casting method. The formation of blend, polymer-polymer interactions, interaction between polymer and nanoparticles and role of the nanoparticles on the interactions among PVA/PVP blend nanocomposites were studies by FTIR spectroscopy. The crystallinity of …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 11–19 Read article
-
Water Permeability of Hybrid Steel Fiber Reinforced Concrete
Abstract: Results of an investigation conducted to study the water permeability of (HySFRC) are presented. Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations corresponding to 0.5, 1.0 and 1.5% fiber volume fractions. A reference concrete mix containing no fibers was also cast for comparison purpose. A total number …
Published in Journal of Construction Engineering, Technology & Management · Vol. 4, Issue 2, 2014 · pp. 30–37 Read article
-
Comparison of the Compressive Strength of Concrete Made with Palm Kernel Shell and Gravel as Coarse Aggregates
Abstract: The investigation of alternative materials for the construction, comparison of the compressive strength of concrete made with palm kernel shell as coarse aggregate and concrete made with gravel. A mix proportion of 1:2:4 with water cement ratio of 0.6, ordinary Portland cement, PKS, gravel and sand were used for this research. 24 cubes were cast and tested for compressive strength at 7, A14, 21 and 28 days. The result showed …
Published in Journal of Construction Engineering, Technology & Management · Vol. 12, Issue 1, 2022 · pp. 12–18 Read article
-
An Experimental Study on Effect of Seawater on Strength of M30 Grade Concrete
Abstract: The concrete structures constructed near the coastal areas may deteriorate due to the action of sea salts present in seawater on hardened concrete surface with passage of time. The strength decreases due to the formation of complex ions when chloride and sulphate ions, react with cement hydration products. In this study, experiments were carried out to get the effect of seawater on the strength of M30 grade concrete in laboratory …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 55–59 Read article
-
An Experimental Investigation of Machining Parameters on Aluminum Composites
Abstract: The need for a material with good mechanical, thermal, and wear resistant properties is satisfied by aluminum composite. However, the biggest obstacle to substituting it with alternative materials is the machining challenges. For this kind of hard-to-cut material, electric discharge machining is a very efficient method. Thus, using a Taguchi-based method, an attempt has been made to determine the most advantageous amount of input parameters for EDM of Al composite. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 8–13 Read article
-
Experimental Analysis of Filler Slab Using Self-Compacting Concrete
Abstract: Present-day self-compacting concrete is classified as an advanced construction material. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It can flow under its weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. The hardened concrete is dense, homogeneous and has the same engineering properties and durability as traditional vibrated concrete. An important improvement of health and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 3, 2016 · pp. 15–24 Read article