Search
778 articles for “Performance indicators”
-
Experimental Study on Micro Silica Amalgamated High Performance Concrete
Abstract: AbstractIn this paper, an endeavour has been made to swot the effect of micro silica (MS) or silicafume with partial replacement of cement (i.e., 0, 5, 10, 15, 20 and 25%) and also with fullreplacement of natural sand by crusher wash sand (CWS) on strength and durabilityproperties for high performance concrete (HPC) of M50 grade with water cement ratio as0.30. Test results indicate that, the use of MS has improved …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 46–52 Read article
-
Electrospun Antibacterial Polymer Composite Scaffolds Incorporating Silver Nanoparticles for Enhanced Wound Healing
Abstract: The present study focuses on the synthesis and characterization of electrospun polycaprolactone (PCL)/chitosan nanofiber scaffolds incorporated with silver nanoparticles (AgNPs) to enhance antibacterial activity and biological performance. Uniform nanofibers with controlled morphology were fabricated using electrospinning, and different AgNP concentrations were introduced to investigate their influence on fiber structure, antimicrobial response, and cellular interactions. Scanning electron microscopy (SEM) revealed that increasing AgNP content resulted in well-distributed fibers with reduced diameters, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1025–1051 Read article
-
Comprehensive Experimental Analysis of the Mechanical Properties and Enhancements of Natural Fiber Composites
Abstract: This research investigates the mechanical characteristics of bio-composites reinforced using jute and sisal fibers. Natural fibers have emerged as promising alternatives because of their low density, renewability, biodegradability and approving mechanical properties. The research involved fabricating bio-composite plates using the hand lay-up method with varying orientations of jute and sisal fibers. The mechanical parameters, including tensile strength, impact strength, and flexural strength, were rigorously assessed and compared across various fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 45–53 Read article
-
GreenDiagnosis: Intelligent Crop Disease Detection Using Deep Learning Algorithm
Abstract: Agriculture in parts of India relies on labour-intensive traditions, maintaining disease-free crops is crucial. Manual methods can be inaccurate, driving farmers towards AI-based solutions. AI offers a proactive approach to address real-time farming challenges. Among these is the invasion of pests, which diminishes crop quality. Combating pest-related diseases poses a challenge, prompting innovation. Effective surveillance and early detection of crop diseases play a pivotal role in ensuring global food security …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 14, Issue 2, 2025 · pp. 8–18 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Enhancing Maintenance Decision-Making in Thermal Power Plants Using Generative AI-Based Fault Diagnosis
Abstract: The growing complexity of operation and power consumption of thermal power stations involve the need to have intelligent fault diagnosis systems that can be used to guarantee reliability and safety in operation. In this research, a Generative AI (GenAI)-based hybrid architecture of early fault detection and predictive maintenance is proposed to improve the decision-making process of the maintenance team. The data-driven analytic approach combines methods of data-driven analytics, Generative AI …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 25–33 Read article
-
Synthesis, Characterization, and Thermogravimetric Analysis of Polylactic Acid-Based Bio-Adhesive for Industrial Applications
Abstract: This study investigated the synthesis, characterization, and thermogravimetric analysis of polylactic acid (PLA)-based bio-adhesives for industrial applications. The adhesive was synthesized using an emulsion polymerization method with varying compositions of PLA and vinyl acetate. The physicochemical, mechanical, and thermal properties of the synthesized adhesives were assessed through pH analysis, viscosity measurement, peel strength evaluation, tack tests, biodegradability investigations, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 42–56 Read article
-
Percentage Changes According to Pathological Finding of Senile Calcification in Fibrous Skeleton of the Heart
Abstract: Fibrous skeleton of the heart consists of aortic valve annulus (AVA), pulmonary valve annulus (PVA), tricuspid valve annulus (TVA), bicuspid valve annulus (BVA) and fibrous trigone of right and left heart (RFT and LFT), and some senile changes like calcinosis begin to develop as growing old. The senile calcification in the fibrous skeleton of the heart leads to several complications such as valve disorders and block of conduction. We studied …
Published in Research and Reviews: A Journal of Medicine · Vol. 9, Issue 3, 2019 · pp. 29–34 Read article
-
Analysis of the Extent of Patients’ Rehabilitation from Knee Injuries or Surgery using Recovery Indices
Abstract: Many major knee surgeries or injuries have long rehabilitation periods, during which the patients may have abnormal gait cycles. The patient transitions to independent exercises performed at home, which are crucial to recovery. Doctors need to have a means to closely track patients exercises for proper recovery. This research utilizes statistical analysis tools, which is applied to analyze gait parameters of patients undergoing the rehabilitation process at different stages of …
Published in Journal of Mechatronics and Automation · Vol. 4, Issue 3, 2017 · pp. 27–40 Read article
-
Comparative Performance Assessment of Shear Wall and Diagrid Systems in an Octagonal Tall High-Rise Building under Seismic and Wind Loads
Abstract: The increasing demand for high-rise structures due to rapid urbanization necessitates the adoption of efficient lateral load-resisting systems to ensure structural safety, stability, and serviceability. This study presents a comparative evaluation of the seismic and wind performance of a Ground plus Fifty-storey high-rise building with an octagonal plan, incorporating different structural configurations such as shear wall arrangements and a diagrid system.A total of six analytical models, including a conventional bare …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 · pp. 42–60 Read article
-
Comparative Performance Assessment of Shear Wall and Diagrid Systems in an Octagonal Tall High-Rise Building under Seismic and Wind Loads
Abstract: The increasing demand for high-rise structures due to rapid urbanization necessitates the adoption of efficient lateral load-resisting systems to ensure structural safety, stability, and serviceability. This study presents a comparative evaluation of the seismic and wind performance of a Ground plus Fiftystorey high-rise building with an octagonal plan, incorporating different structural configurations such as shear wall arrangements and a diagrid system. A total of six analytical models, including a conventional …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
A Study on Improving CBR Value by using EPE foam in Addition to GGBS Slag for Subgrade Soil
Abstract: This paper identifies the use of industrial by-product Ground Granulated Blast Furnace Slag (GGBS) as a stabilizing agent in expansive soil with high swelling property causing severe damage to buildings built on it, and this study identifies the optimal percentage of GGBS for increasing the strength of clayey soil. Using GGBS slag to improve the CBR value of subgrade soil can have potential benefits. Ground Granulated Blast Furnace Slag (GGBS) …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 1–23 Read article
-
Structure–Property Modeling of Cement-Based Multi-Component Composites Using Ensemble Machine Learning and Explainable Feature Attribution
Abstract: Accurate prediction of compressive strength is central to structure–property optimization, quality control, and sustainability-driven design in cement-based composite materials. Cementitious systems represent heterogeneous multi-phase composites composed of reactive binder matrices and dispersed aggregate phases, whose macroscopic mechanical performance emerges from complex nonlinear interactions among constituents and curing-dependent microstructural evolution. This study develops a data-driven structure–property modeling framework to quantify the nonlinear dependence of compressive strength on multi-component composite composition and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 112–131 Read article
-
A Study on Impact of Profitability on Performance of CSR in Selected Public Sector Units of India
Abstract: As it is a clear fact that a business is a part of society, it cannot aloof itself from the society, it becomes its moral duty to take a very good care of the different sections of the society. No matter what the circumstances are, a business cannot deny to accept the responsibilities of performing the social responsibilities. Whatever a business is today, it is but obvious that the efforts …
Published in E-Commerce for Future & Trends · Vol. 11, Issue 2, 2024 · pp. 1–8 Read article
-
Analysis of Rear Suspension Geometry of an ATV
Abstract: This research presents the design and optimization of a rear suspension system specifically developed for an All-Terrain Vehicle (ATV), with the primary goal of enhancing ride quality, handling, and overall dynamic performance across diverse terrains. A key objective is to improve damping characteristics while minimizing unwanted changes in track width and wheelbase during suspension articulation. The study carefully examines critical suspension parameters, including camber angle, toe angle, and wheel travel, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 275–286 Read article
-
Thermoelectric Waste Heat Recovery from Industrial Exhaust Systems Using Nanostructured Hybrid Heat Exchangers
Abstract: The efficient utilization of industrial waste heat has become a critical strategy for improving energy efficiency, reducing fossil fuel consumption, and minimizing greenhouse gas emissions in modern manufacturing sectors. This study proposes a thermoelectric waste heat recovery (TWHR) system integrated with a nanostructured hybrid heat exchanger to enhance heat transfer performance and maximize electrical power generation from high-temperature industrial exhaust streams. The proposed system employs nanostructured surface modifications combined with …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 2, 2026 Read article
-
Experimental Investigation on Concrete with Partial Replacement of Cement by Fly Ash
Abstract: Fly ash is increasingly used as a supplementary cementitious material to partially replace cement in concrete. This paper presents an experimental investigation on the strength properties of concrete with varying percentages of fly ash replacement, from 0% to 25% by weight. The fresh, hardened, and durability properties of high performance concrete with fly ash percentages of 5%, 10%, 15%, 20% and 25% were studied. The test results indicate that 20% …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 1–14 Read article
-
Experimental Investigation of OPC Concrete with Incorporation of Glass Powder as Partial Substituent Material.
Abstract: This study presents an experimental survey aimed at evaluating the viability of incorporating glass powder (GP) as a partial substitute for cement in concrete matrix. The research focuses on assessing the effect of this sustainable alternative in concrete by investigating the various properties of fresh concrete such as workability, mechanical and durability aspects. Specimens were prepared with GP replacement to cement at 5%, 10%, 15%, and 20% levels, with comparative …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1058–1068 Read article
-
Development and Performance Analysis of Pyramid Shaped Novel Solar Water Heater
Abstract: Solar water heating is an environmentally clean technology that utilizes solar energy as a renewable energy source for heating water. Several publications indicate that the interest in residential solar heating using flat-plate solar collectors remains high and current. The optimal tilt angle for solar collectors is estimated to be around 40°, resulting in energy savings, solar fraction, and collector efficiency of 1284 kWh, 29.6%, and 37.9%, respectively, for the entire …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 16, Issue 2, 2025 · pp. 1–6 Read article
-
Conceptualization of An Intelligent Decision Framework for Control Factors and Weld Quality Prediction
Abstract: To improve the robot's welding quality, control welding precision, optimize welding parameters, realize continuous welding quality database optimization, and increase welding defect detection, a fuzzy neural network-based intelligent decision-making system must be built. This study demonstrates how fuzzy control theory and BP neural networks may be used to identify welding issues and enhance process variables. The experimental findings indicate that, with seam classification accuracy close to 90%, enhancing welding parameters …
Published in Journal of Polymer & Composites · Vol. 11, Issue 6, 2023 · pp. 10–19 Read article